Re: [EVGRAY] Disclosure & looping .....

Hector,

I am not sure what the big deal is anyways shorted coils vfd's etc just
too much heat on load and hard on brushes during tuning, grung grung
grung.  I don't think it is patent-able because you already disclosed
this design publicly.   Also the device from 50's or 60's very close to
it is an expired patent...  I am surprised you are not tossing rocks.

Like you said Norm gave some jewels here big time too.

On other adventures, in order to induce hyperbolic motion in an unloaded
high impedance 3 phase device such as a Tesla coil set:

Speaking from the aspects of control and field strength, Is this better
to use natural 3rds without the modulation or even harmonics and an odd
beat freq?

The best way to get ones research stalled out is to show to a friend
from some frozen thought bank like a University EE or JPL "scientist"
and when the cognitive dissonance kicks in they start a freak show the
light of which one does not want to be reflected in.




On 5/13/2018 10:37 AM, [email protected] [EVGRAY] wrote:
>  
>
> Collecting the information posted here over the years Looping has
> being given by more than a dozen different persons here ,,, as With RV
> disclosures people simply don't READ , Don't do the experiment & do
> not Understand ....
>
> Norman has given you some JEWELS that are worth a kings ransom in his
> NEUTRAL SPIKE disclosures , The COIL BANGER can be used to do research
> on it , so there is NO excuse not to buy a $6.00 party xenon tube
> strobe board and do some tests to create single shot spikes !
> and so on with every disclosure here , the experimentation is the key !
>
> Along with the being development to handle the technology "force"...
>
> (H)  
>
>  
>
>
>

Hector!  Went back to Jan. 1994 when I accidentally discovered what 
happens when you isolate a charge in space and get a response from 
ground!  This is totally in line with your coil banger experiments!   
All of the EMP, Neutral Spike experiments have dealt with the isolation 
phenomenon where you totally float a charged inductor & and capacitance 
in space with no ground reference!  Since based on theory, you cannot 
destroy energy but can change it into another form. This is exactly what 
happens in the Magnetic Flux Annihilation and Reconnect studies which 
produce the EMP.



The following is a compilation of messages regarding electrical energy, the

TOD circuit, BertPool'sFIREFLY circuit and other related material.You

will also need the image FF1.GIF to see the changes in the circuit.

===========================================================================

Message 4577DATE/TIME: 01/26/94 20:44

From: NORMAN WOOTAN

To: ALL

Subject: Neutral Spike

Folder : A, "Public Mail"

Today I found an elegant and simple way to prove my theory on the source of

the NEUTRAL SPIKE.I was working in anursing home installing some simple

buzzers on the door alarm system and was testing and tuning the sound level

of the audiooutput (the loudness of the buzz) when Igotashockthat

nearly took meright off the ladder.Now this buzzer is powered by 24V AC

and you can't get a shock out of 24VACbutwhenyouconsiderthe SPIKE

PHENONENON it is awsome.This buzzer is made by EDWARDS,calleda LUNGEN

BUZZER, CAT. NO 15-2G5 24 V AC 60 HZ.I suggest all that are interested in

duplicating the followingexperiment,goto your local electrical supply

house and get this particular model forit has features that are ideal for

the purpose of producing NEUTRAL SPIKES.This buzzer isconstructed so as

both sides of the 24V AC is floating (insulated) with the solid steel (not

laminated) core isgroundedtothe frame or metal case.The solid steel

core is ofverymildsteelwhichagravatestheproductionofspike

potential.Remember Isaid you need to think backwards?Yeswewanta

magnetic core whichhasthe most horible spike producing characteristics.

If there is an engineer out there whocouldsuggest an ideal material for

this application, byallmeansspeakupforI wouldloveinputand

participation in thisproject.I brought home a new buzzer and hooked it

up to a standard 24V AC step-down transformerandattachedmy multimeter

(Fluke 87)meter with one lead (black ground) to the caseof the buzzer and

used the redlead to test the potential on the two buzzer terminals.With

24V AC running the buzzer I measured over 2000V coming out of the iron core

of the buzzer.What is interestingisthefactthat with the adjusting

screw I couldvarythe voltage output by changing thefrequencyofthe

buzzer contacts. Nowtobuildasimilardevicethat will enable me to

explore a possibleresonantregionthatmayexistrelatedtothis

phenomenon.I am willing to bet that there will provetobeadefinite

relationship to inductance/impedance of the coil and stray capacitance that

may be involved in the simple circuit.Therefore I will be looking for a

point of resonancethatwill maximize the spike output.Before the TESLA

COIL builders out there jump in and sayit is a simple voltage multiplying

based on impedance ratio,well I only have one coil (no secondary).Joel,

put that inyourpipeand smoke it a while and seeifyoucanseea

solution other than magnetic constricturing as you described earlier in one

of you messages.Ifasaturatingmagneticfluxisdriving electrons

directly out of the iron atoms then visualize the potential here since this

whole planet ispracticallyiron.NORM

===========================================================================

Message 4583DATE/TIME: 01/26/94 23:07

From: JOEL MCCLAIN-- RECEIVED --

To: NORMAN WOOTAN

Subject: Negative Spike

Page 1

Folder : A, "Public Mail"

Hi Norm,

Count on mefor confirmation of this.About the same time that I uploaded

COILBAK, I alsouploaded COILUNIT,whichisa12VDCrelay,energized

through its normallyclosedcontacts,sothatitwouldopen/close

continuously at veryclosetoits aggregate resonance, just like the old

vibrators that they used in car radiostoproduceAC for the vacuum tube

radios.They never lasted too long as they would beat themselves to death,

but they usually outlasted the warranty.Anyway, COILUNITproducesthose

same high negativespikes,andwhenconnected to a rechargable battery,

once the battery accepts the spikes,theterminalvoltage stops falling,

and the voltagestabilizes.This is how the Dutch inventorgotsomany

miles on his electric motorcycle.Anyway, it is subject to mechanical time

delays, so itisnotanabove-unity device, which leads to the "cranky"

semiconductors that Woody spoke of, andwhichCOILBAKdepends upon.The

spikes are exactly as you describe.Thanks again, my friend.

Joel

===========================================================================

Message 4585DATE/TIME: 01/27/94 07:55

From: NORMAN WOOTAN

To: ALL

Subject: Negative Spike

Folder : A, "Public Mail"

To all out there who may want to experiment with the generationof neutral

spike energy,please be advised that to do so you must "float the ground" or

neutral to getahandleonthespikescomingoutoftheiron.In

electrical circles this is a "NO NO" becauseelectrical engineers consider

spikes as anussianceandbothersomeoutput that theytrytototally

supressbecause of it'sdestructiveproperties.Since the voltages go off

the scaleand sometimes have current magnitudesthat they elect not to deal

with they simplyinstallvaristors and such devices toeffectivelytahe

this un-wanted energytoearthground.Our objective is to conserve all

this energy and put it to some use.Myasviceisjustbe careful when

dealing with anyelectricaldeviceonwhich you are workingthathasa

floating neutral or earth ground. Norm

===========================================================================

Message 4588DATE/TIME: 01/27/94 09:30

From: BERT POOL-- RECEIVED --

To: NORMAN WOOTAN

Subject: (R) Neutral Spike

Folder : A, "Public Mail"

Norm, your shockingexperience with the 24 volt door buzzer brings a whole

new perspective totheexpression"gonnaringyourchimes"!One

suggestion: to increase the output of the old ignitioncoils,a condenser

was used inconjunctionwiththecoil-oneof the few cases where a

capacitor was used NOT to reduce aninductivespike.Tryusing a small

capacitor in different configurations with your coil.Youmight find that

working together, theelectronspulledfromthedielectricandthe

electrons pulled from the iron might"aid"oneanother.I've never even

seen it provedthatthe"electrons"pulledfrom thedielectricina

capacitor are identical to the ones released in your iron core - they might

in reality appear similar but in truth be different particles or forces.

The capacitor electrons might, for example, be "hot" current, and the spike

current "cold".Idon't have a test which would differentiate the two, if

they do in fact exist.Just a musing.>> Bert

==========================================================


On 5/13/2018 12:37 PM, [email protected] [EVGRAY] wrote:
>
> Collecting the information posted here over the years Looping has 
> being given by more than a dozen different persons here ,,, as With RV 
> disclosures people simply don't READ , Don't do the experiment & do 
> not Understand ....
>
> Norman has given you some JEWELS that are worth a kings ransom in his 
> NEUTRAL SPIKE disclosures , The COIL BANGER can be used to do research 
> on it , so there is NO excuse not to buy a $6.00 party xenon tube 
> strobe board and do some tests to create single shot spikes !
> and so on with every disclosure here , the experimentation is the key !
>
> Along with the being development to handle the technology "force"...
>
> (H)
>
>
>
>

Collecting the information posted here over the years Looping has being given by more than a dozen different persons here ,,, as With RV disclosures people simply don't READ , Don't do the experiment & do not Understand ....

Norman has given you some JEWELS that are worth a kings ransom in his NEUTRAL SPIKE disclosures , The COIL BANGER can be used to do research on it , so there is NO excuse not to buy a $6.00 party xenon tube strobe board and do some tests to create single shot spikes ! 
and so on with every disclosure here , the experimentation is the key ! 

Along with the being development to handle the technology "force"...

(H)

So we can add a new work now ...ever increasing understanding . ....may be
some will come to understand and achieve the prize . and get the ice box
running .and sence your a proponent of this it should make you very happy
to see it come to fruition .
On May 13, 2018 2:51 PM, "Mick [email protected] [EVGRAY]" <
[email protected]> wrote:

>
>
> Hector,
>
> I am not sure what the big deal is anyways shorted coils vfd's etc just
> too much heat on load and hard on brushes during tuning, grung grung
> grung.  I don't think it is patent-able because you already disclosed this
> design publicly.   Also the device from 50's or 60's very close to it is an
> expired patent...  I am surprised you are not tossing rocks.
>
> Like you said Norm gave some jewels here big time too.
>
> On other adventures, in order to induce hyperbolic motion in an unloaded
> high impedance 3 phase device such as a Tesla coil set:
>
> Speaking from the aspects of control and field strength, Is this better to
> use natural 3rds without the modulation or even harmonics and an odd beat
> freq?
>
> The best way to get ones research stalled out is to show to a friend from
> some frozen thought bank like a University EE or JPL "scientist" and when
> the cognitive dissonance kicks in they start a freak show the light of
> which one does not want to be reflected in.
>
>
>
>
> On 5/13/2018 10:37 AM, [email protected] [EVGRAY] wrote:
>
>
>
> Collecting the information posted here over the years Looping has being
> given by more than a dozen different persons here ,,, as With RV
> disclosures people simply don't READ , Don't do the experiment & do not
> Understand ....
>
> Norman has given you some JEWELS that are worth a kings ransom in his
> NEUTRAL SPIKE disclosures , The COIL BANGER can be used to do research on
> it , so there is NO excuse not to buy a $6.00 party xenon tube strobe board
> and do some tests to create single shot spikes !
> and so on with every disclosure here , the experimentation is the key !
>
> Along with the being development to handle the technology "force"...
>
> (H)
>
>
>
>
>
> 
>

Norman do you have any more papers on this phenomena ? Or are they lost in
Yahoo ?
On May 13, 2018 3:37 PM, "James Glinski" <[email protected]> wrote:

> So we can add a new work now ...ever increasing understanding . ....may be
> some will come to understand and achieve the prize . and get the ice box
> running .and sence your a proponent of this it should make you very happy
> to see it come to fruition .
> On May 13, 2018 2:51 PM, "Mick [email protected] [EVGRAY]" <
> [email protected]> wrote:
>
>>
>>
>> Hector,
>>
>> I am not sure what the big deal is anyways shorted coils vfd's etc just
>> too much heat on load and hard on brushes during tuning, grung grung
>> grung.  I don't think it is patent-able because you already disclosed this
>> design publicly.   Also the device from 50's or 60's very close to it is an
>> expired patent...  I am surprised you are not tossing rocks.
>>
>> Like you said Norm gave some jewels here big time too.
>>
>> On other adventures, in order to induce hyperbolic motion in an unloaded
>> high impedance 3 phase device such as a Tesla coil set:
>>
>> Speaking from the aspects of control and field strength, Is this better
>> to use natural 3rds without the modulation or even harmonics and an odd
>> beat freq?
>>
>> The best way to get ones research stalled out is to show to a friend from
>> some frozen thought bank like a University EE or JPL "scientist" and when
>> the cognitive dissonance kicks in they start a freak show the light of
>> which one does not want to be reflected in.
>>
>>
>>
>>
>> On 5/13/2018 10:37 AM, [email protected] [EVGRAY] wrote:
>>
>>
>>
>> Collecting the information posted here over the years Looping has being
>> given by more than a dozen different persons here ,,, as With RV
>> disclosures people simply don't READ , Don't do the experiment & do not
>> Understand ....
>>
>> Norman has given you some JEWELS that are worth a kings ransom in his
>> NEUTRAL SPIKE disclosures , The COIL BANGER can be used to do research on
>> it , so there is NO excuse not to buy a $6.00 party xenon tube strobe board
>> and do some tests to create single shot spikes !
>> and so on with every disclosure here , the experimentation is the key !
>>
>> Along with the being development to handle the technology "force"...
>>
>> (H)
>>
>>
>>
>>
>>
>> 
>>
>

James!  You asked if I had other papers on this phenomenon! Hector and I 
have posted many times all the relevant documentation about this subject 
but as Hector said, You folks do not read and try to understand.  Please 
read all of the post that I recently (today) posted on this site.  At 
first you will say, Non of this makes sense.  You have to examine each 
piece f the puzzle to understand the big picture we are painting.  The 
tried and proven EMP producing (non nuclear) Flux compression generator 
is a classic case of taking a magnetically saturated inductor of very 
high Henry value and at super speed reduce its Henry value to zero.  The 
huge amount of energy therein contained is converted into an EMP or 
should I say a MEP  (Magneto-Electric Pulse) which is the total inverse 
of the Electro-magnetic pulse.  Ole explained why the sting occurs from 
the Tesla experiments and are not shielded by Faraday cages.  The 
frequencies associated with the MEP are at frequencies same as Cosmic 
rays so have the penetrating power sort of like the Neutrino. Just as 
the holes in a microwave screen have to be small enough to block the 
associated frequency, the MEP is such high frequency that it penetrated 
even the solid metals since it can pass through the atomic latices.   
This was a case of varying the inductance value of the inductor while it 
is saturated.  Now comes the case of varying the value of a capacitor 
while holding a charge.  Charles Yost, My friend who (RIP) published the 
Electric Spacecraft Journal, published an article, Encyclopedia 
Britannica, Variable Capacitor Device that produced over-unity DC from 
electrostatic input. The Hyde article (Rex-Research) gives great 
detail.  I built one and it does work. The is where you change the 
capacitance value of a capacitor with a charge.  You make it inhale and 
exhale, so to speak.  The reason the Hyde Generator is over-unity is 
there is no Lenz Effect with the rotation of a variable capacitor.  
Output (DC) far exceeded the energy needed to create the electrostatic 
charge.   I have posted the Felici Electrostatic Machine on here and did 
not get a single question on this incredible device.  Here is a case 
where you have HARD DC power output of 3000 watts at 300,000V all 
produced from a dielectric media of high pressure pure hydrogen gas.  I 
asked you where did the electrons come from?? As shown, the condenser/ 
capacitor stores it's charge in the electron displacement in the 
dielectric and not on the plates. The dielectric of the Felici Generator 
is the space vacuum or as we like to call it the aether.  The hydrogen 
gas is the transfer media.    Thank You Ole for you give learned though 
and explanations to our dialog.   As Hector has repeatedly stated, 
Please read and understand!   Jumping down from soap box now. Norm


On 5/13/2018 6:46 PM, James Glinski [email protected] [EVGRAY] wrote:
>
> Norman do you have any more papers on this phenomena ? Or are they 
> lost in Yahoo ?
>
> On May 13, 2018 3:37 PM, "James Glinski" <[email protected] 
> <mailto:[email protected]>> wrote:
>
>     So we can add a new work now ...ever increasing understanding .
>     ....may be some will come to understand and achieve the prize .
>     and get the ice box running .and sence your a proponent of this it
>     should make you very happy to see it come to fruition .
>
>     On May 13, 2018 2:51 PM, "Mick [email protected]
>     <mailto:[email protected]> [EVGRAY]" <[email protected]
>     <mailto:[email protected]>> wrote:
>
>         Hector,
>
>         I am not sure what the big deal is anyways shorted coils vfd's
>         etc just too much heat on load and hard on brushes during
>         tuning, grung grung grung.  I don't think it is patent-able
>         because you already disclosed this design publicly. Also the
>         device from 50's or 60's very close to it is an expired
>         patent...  I am surprised you are not tossing rocks.
>
>         Like you said Norm gave some jewels here big time too.
>
>         On other adventures, in order to induce hyperbolic motion in
>         an unloaded high impedance 3 phase device such as a Tesla coil
>         set:
>
>         Speaking from the aspects of control and field strength, Is
>         this better to use natural 3rds without the modulation or even
>         harmonics and an odd beat freq?
>
>         The best way to get ones research stalled out is to show to a
>         friend from some frozen thought bank like a University EE or
>         JPL "scientist" and when the cognitive dissonance kicks in
>         they start a freak show the light of which one does not want
>         to be reflected in.
>
>
>
>
>         On 5/13/2018 10:37 AM, [email protected]
>         <mailto:[email protected]> [EVGRAY] wrote:
>>
>>         Collecting the information posted here over the years Looping
>>         has being given by more than a dozen different persons here
>>         ,,, as With RV disclosures people simply don't READ , Don't
>>         do the experiment & do not Understand ....
>>
>>         Norman has given you some JEWELS that are worth a kings
>>         ransom in his NEUTRAL SPIKE disclosures , The COIL BANGER can
>>         be used to do research on it , so there is NO excuse not to
>>         buy a $6.00 party xenon tube strobe board and do some tests
>>         to create single shot spikes !
>>         and so on with every disclosure here , the experimentation is
>>         the key !
>>
>>         Along with the being development to handle the technology
>>         "force"...
>>
>>         (H)
>>
>>
>>
>
>

Perfect ! : the buzzer can be tuned by pressure in the spring or by magnet proximity the CEMFEMP can be recovered by using a reverse diode across the contacts , tune to a constant spike event and the coil can just overcharge a battery to death , things to look for , core mass , ampere turn ratio & magnet proximity and contact adjust , neither the first time I post this  on the buzzer subject ....

48 volt old telephone hi impedance relays are Wonderful to work with as are designed to be OU ! 

one can be coilbanged in a more modern version in spike magic method ! 

ss spheres can be used at the ends for spatial signal amplification 2 feet is ok ! 

(H)  
 

---In [email protected], <nwootan@...> wrote :

 
 
 Hector!  Went back to Jan. 1994 when I accidentally discovered what happens when you isolate a charge in space and get a response from ground!  This is totally in line with your coil banger experiments!   All of the EMP, Neutral Spike experiments have dealt with the isolation phenomenon where you totally float a charged inductor & and capacitance in space with no ground reference!  Since based on theory, you cannot destroy energy but can change it into another form. This is exactly what happens in the Magnetic Flux Annihilation and Reconnect studies which produce the EMP.

 

 

 The following is a compilation of messages regarding electrical energy, the
   TOD circuit, Bert  Pool's  FIREFLY circuit and other related material.  You
   will also need the image FF1.GIF to see the changes in the circuit.
   ===========================================================================
   Message 4577                                   DATE/TIME: 01/26/94 20:44
   From   : NORMAN WOOTAN
   To     : ALL
   Subject: Neutral Spike
   Folder : A, "Public Mail"
  
   Today I found an elegant and simple way to prove my theory on the source of
   the NEUTRAL SPIKE.  I was working in a  nursing home installing some simple
   buzzers on the door alarm system and was testing and tuning the sound level
   of the audio  output (the loudness of the buzz) when I  got  a  shock  that
   nearly took me  right off the ladder.  Now this buzzer is powered by 24V AC
   and you can't get a shock out of 24VAC  but  when  you  consider  the SPIKE
   PHENONENON it is awsome.  This buzzer is made by EDWARDS,  called  a LUNGEN
   BUZZER, CAT. NO 15-2G5 24 V AC 60 HZ.  I suggest all that are interested in
   duplicating the following  experiment,  go  to your local electrical supply
   house and get this particular model for  it has features that are ideal for
   the purpose of producing NEUTRAL SPIKES.  This buzzer is  constructed so as
   both sides of the 24V AC is floating (insulated) with the solid steel (not
   laminated) core is  grounded  to  the frame or metal case.  The solid steel
   core is of  very  mild  steel  which  agravates  the  production  of  spike
   potential.  Remember I  said you need to think backwards?  Yes  we  want  a
   magnetic core which  has  the most horible spike producing characteristics.
   If there is an engineer out there who  could  suggest an ideal material for
   this application, by  all  means  speak  up  for  I would  love  input  and
   participation in this  project.   I brought home a new buzzer and hooked it
   up to a standard 24V AC step-down transformer  and  attached  my multimeter
   (Fluke 87)meter with one lead (black ground) to the case  of the buzzer and
   used the red  lead to test the potential on the two buzzer terminals.  With
   24V AC running the buzzer I measured over 2000V coming out of the iron core
   of the buzzer.  What is interesting  is  the  fact  that with the adjusting
   screw I could  vary  the voltage output by changing the  frequency  of  the
   buzzer contacts. Now  to  build  a  similar  device  that will enable me to
   explore a possible  resonant  region   that   may  exist  related  to  this
   phenomenon.  I am willing to bet that there will prove  to  be  a  definite
   relationship to inductance/impedance of the coil and stray capacitance that
   may be involved in the simple circuit.  Therefore I will be looking for a
   point of resonance  that  will maximize the spike output.  Before the TESLA
   COIL builders out there jump in and say  it is a simple voltage multiplying
   based on impedance ratio,  well I only have one coil (no secondary).  Joel,
   put that in  your  pipe  and smoke it a while and see  if  you  can  see  a
   solution other than magnetic constricturing as you described earlier in one
   of you messages.   If  a  saturating  magnetic  flux  is  driving electrons
   directly out of the iron atoms then visualize the potential here since this
   whole planet is             practically              iron.             NORM
   ===========================================================================
   Message 4583                                   DATE/TIME: 01/26/94 23:07
   From   : JOEL MCCLAIN                       -- RECEIVED --
   To     : NORMAN WOOTAN
   Subject: Negative Spike
                                      Page 1
  
  
  
  
   Folder : A, "Public Mail"
  
   Hi Norm,
   Count on me  for confirmation of this.  About the same time that I uploaded
   COILBAK, I also  uploaded COILUNIT,  which  is  a  12VDC  relay,  energized
   through its normally   closed  contacts,  so  that  it   would   open/close
   continuously at very  close  to  its aggregate resonance, just like the old
   vibrators that they used in car radios  to  produce  AC for the vacuum tube
   radios.  They never lasted too long as they would beat themselves to death,
   but they usually outlasted the warranty.  Anyway, COILUNIT  produces  those
   same high negative  spikes,  and  when  connected to a rechargable battery,
   once the battery accepts the spikes,  the  terminal  voltage stops falling,
   and the voltage  stabilizes.  This is how the Dutch inventor  got  so  many
   miles on his electric motorcycle.  Anyway, it is subject to mechanical time
   delays, so it  is  not  an  above-unity device, which leads to the "cranky"
   semiconductors that Woody spoke of, and  which  COILBAK  depends upon.  The
   spikes are exactly as you describe.  Thanks again, my friend.
   Joel
   ===========================================================================
   Message 4585                                   DATE/TIME: 01/27/94 07:55
   From   : NORMAN WOOTAN
   To     : ALL
   Subject: Negative Spike
   Folder : A, "Public Mail"
  
   To all out there who may want to experiment with the generation  of neutral
   spike energy,please be advised that to do so you must "float the ground" or
   neutral to get  a  handle  on  the  spikes  coming  out  of  the  iron.  In
   electrical circles this is a "NO NO" because  electrical engineers consider
   spikes as a  nussiance  and  bothersome  output that they  try  to  totally
   supressbecause of it's  destructive  properties.  Since the voltages go off
   the scaleand sometimes have current magnitudes  that they elect not to deal
   with they simply  install  varistors and such devices to  effectively  tahe
   this un-wanted energy  to  earth  ground.  Our objective is to conserve all
   this energy and put it to some use.   My  asvice  is  just  be careful when
   dealing with any  electricaldevice  on  which you are working  that  has  a
   floating neutral or earth ground. Norm
   ===========================================================================
   Message 4588                                   DATE/TIME: 01/27/94 09:30
   From   : BERT POOL                          -- RECEIVED --
   To     : NORMAN WOOTAN
   Subject: (R) Neutral Spike
   Folder : A, "Public Mail"
  
   Norm, your shocking  experience with the 24 volt door buzzer brings a whole
   new perspective to  the  expression   "gonna   ring   your   chimes"!   One
   suggestion: to increase the output of the old ignition  coils,  a condenser
   was used in  conjunction  with  the  coil  -  one  of the few cases where a
   capacitor was used NOT to reduce an  inductive  spike.   Try  using a small
   capacitor in different configurations with your coil.  You  might find that
   working together, the   electrons   pulled  from  the  dielectric  and  the
   electrons pulled from the iron might  "aid"  one  another.  I've never even
   seen it proved  that  the  "electrons"  pulled  from the  dielectric  in  a
   capacitor are identical to the ones released in your iron core - they might
 
(Message over 64 KB, truncated)

HectorTwo commercial restaraunt supply srainless salad bowls make very decent spheres with a thin band inside to connect them. Very cheap, very thin.Cheers Warren

Sent from Yahoo Mail on Android 
 
  On Mon, May 14, 2018 at 8:37 AM, [email protected] [EVGRAY]<[email protected]> wrote:       
Perfect ! : the buzzer can be tuned by pressure in the spring or by magnet proximity the CEMFEMP can be recovered by using a reverse diode across the contacts , tune to a constant spike event and the coil can just overcharge a battery to death , things to look for , core mass , ampere turn ratio & magnet proximity and contact adjust , neither the first time I post this  on the buzzer subject ....

48 volt old telephone hi impedance relays are Wonderful to work with as are designed to be OU ! 

one can be coilbanged in a more modern version in spike magic method ! 

ss spheres can be used at the ends for spatial signal amplification 2 feet is ok ! 

(H)  



---In [email protected], <nwootan@...> wrote :






Hector!  Went back to Jan. 1994 when Iaccidentally discovered what happens when you isolate a chargein space and get a response from ground!  This is totally inline with your coil banger experiments!   All of the EMP,Neutral Spike experiments have dealt with the isolationphenomenon where you totally float a charged inductor & andcapacitance in space with no ground reference!  Since based ontheory, you cannot destroy energy but can change it into anotherform. This is exactly what happens in the Magnetic FluxAnnihilation and Reconnect studies which produce the EMP.








The following is a compilation of messagesregardingelectrical energy, the

  TODcircuit,Bert  Pool's  FIREFLY circuit and otherrelatedmaterial.  You

  willalso need theimage FF1.GIF to see the changes in the circuit.

 ===========================================================================

  Message4577                                  DATE/TIME:01/26/94 20:44

  From   : NORMAN WOOTAN

  To     : ALL

  Subject:NeutralSpike

  Folder: A,"Public Mail"

 

  TodayI found anelegant and simple way to prove my theory on the source of

  theNEUTRALSPIKE.  I was working ina  nursing homeinstalling some simple

  buzzerson the dooralarm system and was testing and tuning the sound level

  ofthe audio  output (theloudness of the buzz) when I  got a  shock  that

  nearlytook me  right off theladder.  Now this buzzeris powered by 24V AC

  andyou can't get ashock out of 24VAC  but  when you  consider  the SPIKE

  PHENONENONit isawsome.  This buzzer ismade byEDWARDS,  called  a LUNGEN

  BUZZER,CAT. NO15-2G5 24 V AC 60 HZ.  Isuggest all thatare interested in

  duplicatingthefollowing  experiment,  go  to yourlocal electrical supply

  houseand get thisparticular model for  ithas featuresthat are ideal for

  thepurpose ofproducing NEUTRAL SPIKES.  Thisbuzzeris  constructed so as

  bothsides of the24V AC is floating (insulated) with the solid steel (not

  laminated)coreis  grounded  to  theframe or metal case.  Thesolid steel

  coreis of  very mild  steel  which agravates  the  production of  spike

  potential.  Remember I said you need to think backwards? Yes  we  want  a

  magneticcorewhich  has  the most horible spikeproducingcharacteristics.

  Ifthere is anengineer out there who  could  suggest an ideal materialfor

  thisapplication,by  all means  speak  up for  I would  love input  and

  participationinthis  project.   I brought home a newbuzzer and hooked it

  upto a standard 24VAC step-down transformer  and  attached my multimeter

  (Fluke87)meter withone lead (black ground) to the case  ofthe buzzer and

  usedthe red  lead to test thepotential on the two buzzerterminals.  With

  24VAC running thebuzzer I measured over 2000V coming out of the iron core

  ofthe buzzer.  What isinteresting  is the  fact  that with the adjusting

  screwI could  vary the voltage output by changing the frequency  of  the

  buzzercontacts.Now  to build  a  similar device  that willenable me to

  exploreapossible  resonant  region  that   may  exist related  to  this

  phenomenon.  I am willing to bet thatthere willprove  to be  a  definite

  relationshiptoinductance/impedance of the coil and stray capacitance that

  maybe involved inthe simple circuit.  ThereforeI will belooking for a

  pointofresonance  that  will maximize the spikeoutput.  Before the TESLA

  COILbuilders outthere jump in and say  itis a simplevoltage multiplying

  basedon impedanceratio,  well I only haveone coil (nosecondary).  Joel,

  putthat in  your pipe  and smoke ita while andsee  if you  can  see  a

  solution other than magneticconstricturing asyou described earlier in one

  ofyoumessages.   If  a saturating  magnetic  flux is  drivingelectrons

  directlyout of theiron atoms then visualize the potential here since this

  wholeplanet is             practically              iron.             NORM

 ===========================================================================

  Message4583                                  DATE/TIME:01/26/94 23:07

  From   : JOEL MCCLAIN                       --RECEIVED --

  To     : NORMAN WOOTAN

  Subject:NegativeSpike

                                    Page 1

 

 

 

 

  Folder: A,"Public Mail"

 

  HiNorm,

  Counton me  for confirmationof this.  About the sametime that I uploaded

  COILBAK,I also  uploadedCOILUNIT,  which is  a  12VDC relay,  energized

  throughitsnormally   closed  contacts, so  that  it  would   open/close

  continuouslyatvery  close  to  itsaggregate resonance, just like the old

  vibratorsthat theyused in car radios  to  produce AC for the vacuum tube

  radios.  They never lasted too longas they would beatthemselves to death,

  butthey usuallyoutlasted the warranty.  Anyway,COILUNIT  produces  those

  samehighnegative  spikes,  and when  connected toa rechargablebattery,

  oncethe batteryaccepts the spikes,  the  terminal voltage stops falling,

  andthe voltage  stabilizes. This is how the Dutch inventor got  so  many

  mileson hiselectric motorcycle.  Anyway,it issubject to mechanical time

  delays,so it  is not  an  above-unity device, whichleads to the"cranky"

  semiconductorsthatWoody spoke of, and  which  COILBAK depends upon.  The

  spikesare exactlyas you describe.  Thanksagain, myfriend.

  Joel

 ===========================================================================

  Message4585                                  DATE/TIME:01/27/94 07:55

  From   : NORMAN WOOTAN

  To     : ALL

  Subject:NegativeSpike

  Folder: A,"Public Mail"

 

  Toall out there whomay want to experiment with the generation of neutral

  spikeenergy,pleasebe advised that to do so you must "float the ground" or

  neutralto get  a handle  on  the spikes  coming  out of  the  iron. In

  electricalcircles thisis a "NO NO" because electrical engineers consider

  spikesas a  nussiance and  bothersome  output that they  try to  totally

  supressbecauseofit's  destructive  properties. Since the voltages go off

  thescaleandsometimes have current magnitudes thatthey elect not to deal

  withtheysimply  install  varistors and such devicesto  effectively tahe

  thisun-wantedenergy  to  earth ground.  Ourobjective is toconserve all

  thisenergy and putit to some use.   My  asvice is  just  be careful when

  dealingwithany  electricaldevice  on which you are working  that  has  a

  floatingneutral orearth ground. Norm

 ===========================================================================

  Message4588                                  DATE/TIME:01/27/94 09:30

  From   : BERT POOL                          --RECEIVED --

  To     : NORMAN WOOTAN

  Subject:(R) NeutralSpike

  Folder: A,"Public Mail"

 

  Norm,yourshocking  experience withthe 24 voltdoor buzzer brings a whole

  newperspectiveto  the expression   "gonna   ring  your   chimes"!   One

  suggestion:toincrease the output of the old ignition coils,  acondenser

  wasused in  conjunction with  the  coil -  one  of the few cases where a

  capacitorwas usedNOT to reduce an  inductive  spike.  Try  using a small

  capacitorindifferent configurations with your coil. You  might findthat

  workingtogether,the   electrons   pulled from  the  dielectric and  the

  electronspulled fromthe iron might  "aid"  one another.  I'venever even

  seenit proved  that the  "electrons"  pulled from the  dielectric  in  a

  capacitorareidentical to the ones released in your iron core - they might


(Message over 64 KB, truncated)
  #yiv9429476649 #yiv9429476649 -- #yiv9429476649ygrp-mkp {border:1px solid #d8d8d8;font-family:Arial;margin:10px 0;padding:0 10px;}#yiv9429476649 #yiv9429476649ygrp-mkp hr {border:1px solid #d8d8d8;}#yiv9429476649 #yiv9429476649ygrp-mkp #yiv9429476649hd {color:#628c2a;font-size:85%;font-weight:700;line-height:122%;margin:10px 0;}#yiv9429476649 #yiv9429476649ygrp-mkp #yiv9429476649ads {margin-bottom:10px;}#yiv9429476649 #yiv9429476649ygrp-mkp .yiv9429476649ad {padding:0 0;}#yiv9429476649 #yiv9429476649ygrp-mkp .yiv9429476649ad p {margin:0;}#yiv9429476649 #yiv9429476649ygrp-mkp .yiv9429476649ad a {color:#0000ff;text-decoration:none;}#yiv9429476649 #yiv9429476649ygrp-sponsor #yiv9429476649ygrp-lc {font-family:Arial;}#yiv9429476649 #yiv9429476649ygrp-sponsor #yiv9429476649ygrp-lc #yiv9429476649hd {margin:10px 0px;font-weight:700;font-size:78%;line-height:122%;}#yiv9429476649 #yiv9429476649ygrp-sponsor #yiv9429476649ygrp-lc .yiv9429476649ad {margin-bottom:10px;padding:0 0;}#yiv9429476649 #yiv9429476649actions {font-family:Verdana;font-size:11px;padding:10px 0;}#yiv9429476649 #yiv9429476649activity {background-color:#e0ecee;float:left;font-family:Verdana;font-size:10px;padding:10px;}#yiv9429476649 #yiv9429476649activity span {font-weight:700;}#yiv9429476649 #yiv9429476649activity span:first-child {text-transform:uppercase;}#yiv9429476649 #yiv9429476649activity span a {color:#5085b6;text-decoration:none;}#yiv9429476649 #yiv9429476649activity span span {color:#ff7900;}#yiv9429476649 #yiv9429476649activity span .yiv9429476649underline {text-decoration:underline;}#yiv9429476649 .yiv9429476649attach {clear:both;display:table;font-family:Arial;font-size:12px;padding:10px 0;width:400px;}#yiv9429476649 .yiv9429476649attach div a {text-decoration:none;}#yiv9429476649 .yiv9429476649attach img {border:none;padding-right:5px;}#yiv9429476649 .yiv9429476649attach label {display:block;margin-bottom:5px;}#yiv9429476649 .yiv9429476649attach label a {text-decoration:none;}#yiv9429476649 blockquote {margin:0 0 0 4px;}#yiv9429476649 .yiv9429476649bold {font-family:Arial;font-size:13px;font-weight:700;}#yiv9429476649 .yiv9429476649bold a {text-decoration:none;}#yiv9429476649 dd.yiv9429476649last p a {font-family:Verdana;font-weight:700;}#yiv9429476649 dd.yiv9429476649last p span {margin-right:10px;font-family:Verdana;font-weight:700;}#yiv9429476649 dd.yiv9429476649last p span.yiv9429476649yshortcuts {margin-right:0;}#yiv9429476649 div.yiv9429476649attach-table div div a {text-decoration:none;}#yiv9429476649 div.yiv9429476649attach-table {width:400px;}#yiv9429476649 div.yiv9429476649file-title a, #yiv9429476649 div.yiv9429476649file-title a:active, #yiv9429476649 div.yiv9429476649file-title a:hover, #yiv9429476649 div.yiv9429476649file-title a:visited {text-decoration:none;}#yiv9429476649 div.yiv9429476649photo-title a, #yiv9429476649 div.yiv9429476649photo-title a:active, #yiv9429476649 div.yiv9429476649photo-title a:hover, #yiv9429476649 div.yiv9429476649photo-title a:visited {text-decoration:none;}#yiv9429476649 div#yiv9429476649ygrp-mlmsg #yiv9429476649ygrp-msg p a span.yiv9429476649yshortcuts {font-family:Verdana;font-size:10px;font-weight:normal;}#yiv9429476649 .yiv9429476649green {color:#628c2a;}#yiv9429476649 .yiv9429476649MsoNormal {margin:0 0 0 0;}#yiv9429476649 o {font-size:0;}#yiv9429476649 #yiv9429476649photos div {float:left;width:72px;}#yiv9429476649 #yiv9429476649photos div div {border:1px solid #666666;min-height:62px;overflow:hidden;width:62px;}#yiv9429476649 #yiv9429476649photos div label {color:#666666;font-size:10px;overflow:hidden;text-align:center;white-space:nowrap;width:64px;}#yiv9429476649 #yiv9429476649reco-category {font-size:77%;}#yiv9429476649 #yiv9429476649reco-desc {font-size:77%;}#yiv9429476649 .yiv9429476649replbq {margin:4px;}#yiv9429476649 #yiv9429476649ygrp-actbar div a:first-child {margin-right:2px;padding-right:5px;}#yiv9429476649 #yiv9429476649ygrp-mlmsg {font-size:13px;font-family:Arial, helvetica, clean, sans-serif;}#yiv9429476649 #yiv9429476649ygrp-mlmsg table {font-size:inherit;font:100%;}#yiv9429476649 #yiv9429476649ygrp-mlmsg select, #yiv9429476649 input, #yiv9429476649 textarea {font:99% Arial, Helvetica, clean, sans-serif;}#yiv9429476649 #yiv9429476649ygrp-mlmsg pre, #yiv9429476649 code {font:115% monospace;}#yiv9429476649 #yiv9429476649ygrp-mlmsg * {line-height:1.22em;}#yiv9429476649 #yiv9429476649ygrp-mlmsg #yiv9429476649logo {padding-bottom:10px;}#yiv9429476649 #yiv9429476649ygrp-msg p a {font-family:Verdana;}#yiv9429476649 #yiv9429476649ygrp-msg p#yiv9429476649attach-count span {color:#1E66AE;font-weight:700;}#yiv9429476649 #yiv9429476649ygrp-reco #yiv9429476649reco-head {color:#ff7900;font-weight:700;}#yiv9429476649 #yiv9429476649ygrp-reco {margin-bottom:20px;padding:0px;}#yiv9429476649 #yiv9429476649ygrp-sponsor #yiv9429476649ov li a {font-size:130%;text-decoration:none;}#yiv9429476649 #yiv9429476649ygrp-sponsor #yiv9429476649ov li {font-size:77%;list-style-type:square;padding:6px 0;}#yiv9429476649 #yiv9429476649ygrp-sponsor #yiv9429476649ov ul {margin:0;padding:0 0 0 8px;}#yiv9429476649 #yiv9429476649ygrp-text {font-family:Georgia;}#yiv9429476649 #yiv9429476649ygrp-text p {margin:0 0 1em 0;}#yiv9429476649 #yiv9429476649ygrp-text tt {font-size:120%;}#yiv9429476649 #yiv9429476649ygrp-vital ul li:last-child {border-right:none !important;}#yiv9429476649

schematics were posted here long ago ... 

(H) 

---In [email protected], <nwootan@...> wrote :

 James!  You asked if I had other papers on this phenomenon!  Hector and I have posted many times all the relevant documentation about this subject but as Hector said, You folks do not read and try to understand.  Please read all of the post that I recently (today) posted on this site.  At first you will say, Non of this makes sense.  You have to examine each piece f the puzzle to understand the big picture we are painting.  The tried and proven EMP producing (non nuclear) Flux compression generator is a classic case of taking a magnetically saturated inductor of very high Henry value and at super speed reduce its Henry value to zero.  The huge amount of energy therein contained is converted into an EMP or should I say a MEP  (Magneto-Electric Pulse) which is the total inverse of the Electro-magnetic pulse.  Ole explained why the sting occurs from the Tesla experiments and are not shielded by Faraday cages.  The frequencies associated with the MEP are at frequencies same as Cosmic rays so have the penetrating power sort of like the Neutrino. Just as the holes in a microwave screen have to be small enough to block the associated frequency, the MEP is such high frequency that it penetrated even the solid metals since it can pass through the atomic latices.   This was a case of varying the inductance value of the inductor while it is saturated.  Now comes the case of varying the value of a capacitor while holding a charge.  Charles Yost, My friend who (RIP) published the Electric Spacecraft Journal, published an article, Encyclopedia Britannica, Variable Capacitor Device that produced over-unity DC from electrostatic input. The Hyde article (Rex-Research) gives great detail.  I built one and it does work.  The is where you change the capacitance value of a capacitor with a charge.  You make it inhale and exhale, so to speak.  The reason the Hyde Generator is over-unity is there is no Lenz Effect with the rotation of a variable capacitor.  Output (DC) far exceeded the energy needed to create the electrostatic charge.   I have posted the Felici Electrostatic Machine on here and did not get a single question on this incredible device.  Here is a case where you have HARD DC power output of 3000 watts at 300,000V all produced from a dielectric media of high pressure pure hydrogen gas.  I asked you where did the electrons come from?? As shown, the condenser/ capacitor stores it's charge in the electron displacement in the dielectric and not on the plates. The dielectric of the Felici Generator is the space vacuum or as we like to call it the aether.  The hydrogen gas is the transfer media.    Thank You Ole for you give learned though and explanations to our dialog.   As Hector has repeatedly stated, Please read and understand!   Jumping down from soap box now. Norm
 
 
 On 5/13/2018 6:46 PM, James Glinski jglinski01@... mailto:jglinski01@... [EVGRAY] wrote:
 
   Norman do you have any more papers on this phenomena ? Or are they lost in Yahoo ?
 On May 13, 2018 3:37 PM, "James Glinski" <jglinski01@... mailto:jglinski01@...> wrote:
 So we can add a new work now ...ever increasing understanding . ....may be some will come to understand and achieve the prize . and get the ice box running .and sence your a proponent of this it should make you very happy to see it come to fruition .
 On May 13, 2018 2:51 PM, "Mick mkjekyll@... mailto:mkjekyll@... [EVGRAY]" <[email protected] mailto:[email protected]> wrote:
   
 Hector,
 I am not sure what the big deal is anyways shorted coils vfd's etc just too much heat on load and hard on brushes during tuning, grung grung grung.  I don't think it is patent-able because you already disclosed this design publicly.   Also the device from 50's or 60's very close to it is an expired patent...  I am surprised you are not tossing rocks.
 
 Like you said Norm gave some jewels here big time too.
 On other adventures, in order to induce hyperbolic motion in an unloaded high impedance 3 phase device such as a Tesla coil set:
 Speaking from the aspects of control and field strength, Is this better to use natural 3rds without the modulation or even harmonics and an odd beat freq?
 The best way to get ones research stalled out is to show to a friend from some frozen thought bank like a University EE or JPL "scientist" and when the cognitive dissonance kicks in they start a freak show the light of which one does not want to be reflected in.
 
 
 
 
 
 
 
 On 5/13/2018 10:37 AM, arkresearch@... mailto:arkresearch@... [EVGRAY] wrote:
 
   Collecting the information posted here over the years Looping has being given by more than a dozen different persons here ,,, as With RV disclosures people simply don't READ , Don't do the experiment & do not Understand ....
 
 Norman has given you some JEWELS that are worth a kings ransom in his NEUTRAL SPIKE disclosures , The COIL BANGER can be used to do research on it , so there is NO excuse not to buy a $6.00 party xenon tube strobe board and do some tests to create single shot spikes ! 
 and so on with every disclosure here , the experimentation is the key ! 
 
 Along with the being development to handle the technology "force"...
 
 (H)

I think I might have it .this goes back to those two Chinese guys who won
Nobel prizes back in what 1952 ? For the discovery of broken symmetry .by
using a high power pulse just right you can disrupt the balance of the
vacuum .and release the energy there to one degree or another .Tesla was
doing this with the big caps burning up wires causing a disruptive pulse
wave in the void releasing the energy. It's a lot like atom smashing
getting four times the energy back out but dirty . Lee I think was one of
the men who got the prize . it's the basis for much of the cold war weapon
development death ray .thank you for your help I'll go Thu it all.... shit
we need a better system of storage than Yahoo I can't even get on there any
more and if they die it all dies with them .
On May 14, 2018 10:57 AM, "Norman Wootan [email protected] [EVGRAY]" <
[email protected]> wrote:

>
>
> James!  You asked if I had other papers on this phenomenon!  Hector and I
> have posted many times all the relevant documentation about this subject
> but as Hector said, You folks do not read and try to understand.  Please
> read all of the post that I recently (today) posted on this site.  At first
> you will say, Non of this makes sense.  You have to examine each piece f
> the puzzle to understand the big picture we are painting.  The tried and
> proven EMP producing (non nuclear) Flux compression generator is a classic
> case of taking a magnetically saturated inductor of very high Henry value
> and at super speed reduce its Henry value to zero.  The huge amount of
> energy therein contained is converted into an EMP or should I say a MEP
> (Magneto-Electric Pulse) which is the total inverse of the Electro-magnetic
> pulse.  Ole explained why the sting occurs from the Tesla experiments and
> are not shielded by Faraday cages.  The frequencies associated with the MEP
> are at frequencies same as Cosmic rays so have the penetrating power sort
> of like the Neutrino. Just as the holes in a microwave screen have to be
> small enough to block the associated frequency, the MEP is such high
> frequency that it penetrated even the solid metals since it can pass
> through the atomic latices.   This was a case of varying the inductance
> value of the inductor while it is saturated.  Now comes the case of varying
> the value of a capacitor while holding a charge.  Charles Yost, My friend
> who (RIP) published the Electric Spacecraft Journal, published an article,
> Encyclopedia Britannica, Variable Capacitor Device that produced over-unity
> DC from electrostatic input. The Hyde article (Rex-Research) gives great
> detail.  I built one and it does work.  The is where you change the
> capacitance value of a capacitor with a charge.  You make it inhale and
> exhale, so to speak.  The reason the Hyde Generator is over-unity is there
> is no Lenz Effect with the rotation of a variable capacitor.  Output (DC)
> far exceeded the energy needed to create the electrostatic charge.   I have
> posted the Felici Electrostatic Machine on here and did not get a single
> question on this incredible device.  Here is a case where you have HARD DC
> power output of 3000 watts at 300,000V all produced from a dielectric media
> of high pressure pure hydrogen gas.  I asked you where did the electrons
> come from?? As shown, the condenser/ capacitor stores it's charge in the
> electron displacement in the dielectric and not on the plates. The
> dielectric of the Felici Generator is the space vacuum or as we like to
> call it the aether.  The hydrogen gas is the transfer media.    Thank You
> Ole for you give learned though and explanations to our dialog.   As Hector
> has repeatedly stated, Please read and understand!   Jumping down from soap
> box now. Norm
>
> On 5/13/2018 6:46 PM, James Glinski [email protected] [EVGRAY] wrote:
>
>
>
> Norman do you have any more papers on this phenomena ? Or are they lost in
> Yahoo ?
> On May 13, 2018 3:37 PM, "James Glinski" <[email protected]> wrote:
>
>> So we can add a new work now ...ever increasing understanding . ....may
>> be some will come to understand and achieve the prize . and get the ice box
>> running .and sence your a proponent of this it should make you very happy
>> to see it come to fruition .
>> On May 13, 2018 2:51 PM, "Mick [email protected] [EVGRAY]" <
>> [email protected]> wrote:
>>
>>>
>>>
>>> Hector,
>>>
>>> I am not sure what the big deal is anyways shorted coils vfd's etc just
>>> too much heat on load and hard on brushes during tuning, grung grung
>>> grung.  I don't think it is patent-able because you already disclosed this
>>> design publicly.   Also the device from 50's or 60's very close to it is an
>>> expired patent...  I am surprised you are not tossing rocks.
>>>
>>> Like you said Norm gave some jewels here big time too.
>>>
>>> On other adventures, in order to induce hyperbolic motion in an unloaded
>>> high impedance 3 phase device such as a Tesla coil set:
>>>
>>> Speaking from the aspects of control and field strength, Is this better
>>> to use natural 3rds without the modulation or even harmonics and an odd
>>> beat freq?
>>>
>>> The best way to get ones research stalled out is to show to a friend
>>> from some frozen thought bank like a University EE or JPL "scientist" and
>>> when the cognitive dissonance kicks in they start a freak show the light of
>>> which one does not want to be reflected in.
>>>
>>>
>>>
>>>
>>> On 5/13/2018 10:37 AM, [email protected] [EVGRAY] wrote:
>>>
>>>
>>>
>>> Collecting the information posted here over the years Looping has being
>>> given by more than a dozen different persons here ,,, as With RV
>>> disclosures people simply don't READ , Don't do the experiment & do not
>>> Understand ....
>>>
>>> Norman has given you some JEWELS that are worth a kings ransom in his
>>> NEUTRAL SPIKE disclosures , The COIL BANGER can be used to do research on
>>> it , so there is NO excuse not to buy a $6.00 party xenon tube strobe board
>>> and do some tests to create single shot spikes !
>>> and so on with every disclosure here , the experimentation is the key !
>>>
>>> Along with the being development to handle the technology "force"...
>>>
>>> (H)
>>>
>>>
>>>
>>>
>>>
>>>
> 
>

This sounds a lot like the hivoltage between two pieces of carbon with a
alignment magnetic coil around them to direct the beta radiation Thu the
cabin to the wires the spark fills the carbon to boron and the it falls
back to carbon releasing much energy as beta energy .being traveling at 62%
the speed of light make a big EMF on impact considered to be the same as
electric energy . even living this setup in line as a spark would or should
jump your out put .but check for any radiation comming off .
On May 14, 2018 1:45 PM, "James Glinski" <[email protected]> wrote:

> I think I might have it .this goes back to those two Chinese guys who won
> Nobel prizes back in what 1952 ? For the discovery of broken symmetry .by
> using a high power pulse just right you can disrupt the balance of the
> vacuum .and release the energy there to one degree or another .Tesla was
> doing this with the big caps burning up wires causing a disruptive pulse
> wave in the void releasing the energy. It's a lot like atom smashing
> getting four times the energy back out but dirty . Lee I think was one of
> the men who got the prize . it's the basis for much of the cold war weapon
> development death ray .thank you for your help I'll go Thu it all.... shit
> we need a better system of storage than Yahoo I can't even get on there any
> more and if they die it all dies with them .
> On May 14, 2018 10:57 AM, "Norman Wootan [email protected] [EVGRAY]" <
> [email protected]> wrote:
>
>>
>>
>> James!  You asked if I had other papers on this phenomenon!  Hector and I
>> have posted many times all the relevant documentation about this subject
>> but as Hector said, You folks do not read and try to understand.  Please
>> read all of the post that I recently (today) posted on this site.  At first
>> you will say, Non of this makes sense.  You have to examine each piece f
>> the puzzle to understand the big picture we are painting.  The tried and
>> proven EMP producing (non nuclear) Flux compression generator is a classic
>> case of taking a magnetically saturated inductor of very high Henry value
>> and at super speed reduce its Henry value to zero.  The huge amount of
>> energy therein contained is converted into an EMP or should I say a MEP
>> (Magneto-Electric Pulse) which is the total inverse of the Electro-magnetic
>> pulse.  Ole explained why the sting occurs from the Tesla experiments and
>> are not shielded by Faraday cages.  The frequencies associated with the MEP
>> are at frequencies same as Cosmic rays so have the penetrating power sort
>> of like the Neutrino. Just as the holes in a microwave screen have to be
>> small enough to block the associated frequency, the MEP is such high
>> frequency that it penetrated even the solid metals since it can pass
>> through the atomic latices.   This was a case of varying the inductance
>> value of the inductor while it is saturated.  Now comes the case of varying
>> the value of a capacitor while holding a charge.  Charles Yost, My friend
>> who (RIP) published the Electric Spacecraft Journal, published an article,
>> Encyclopedia Britannica, Variable Capacitor Device that produced over-unity
>> DC from electrostatic input. The Hyde article (Rex-Research) gives great
>> detail.  I built one and it does work.  The is where you change the
>> capacitance value of a capacitor with a charge.  You make it inhale and
>> exhale, so to speak.  The reason the Hyde Generator is over-unity is there
>> is no Lenz Effect with the rotation of a variable capacitor.  Output (DC)
>> far exceeded the energy needed to create the electrostatic charge.   I have
>> posted the Felici Electrostatic Machine on here and did not get a single
>> question on this incredible device.  Here is a case where you have HARD DC
>> power output of 3000 watts at 300,000V all produced from a dielectric media
>> of high pressure pure hydrogen gas.  I asked you where did the electrons
>> come from?? As shown, the condenser/ capacitor stores it's charge in the
>> electron displacement in the dielectric and not on the plates. The
>> dielectric of the Felici Generator is the space vacuum or as we like to
>> call it the aether.  The hydrogen gas is the transfer media.    Thank You
>> Ole for you give learned though and explanations to our dialog.   As Hector
>> has repeatedly stated, Please read and understand!   Jumping down from soap
>> box now. Norm
>>
>> On 5/13/2018 6:46 PM, James Glinski [email protected] [EVGRAY] wrote:
>>
>>
>>
>> Norman do you have any more papers on this phenomena ? Or are they lost
>> in Yahoo ?
>> On May 13, 2018 3:37 PM, "James Glinski" <[email protected]> wrote:
>>
>>> So we can add a new work now ...ever increasing understanding . ....may
>>> be some will come to understand and achieve the prize . and get the ice box
>>> running .and sence your a proponent of this it should make you very happy
>>> to see it come to fruition .
>>> On May 13, 2018 2:51 PM, "Mick [email protected] [EVGRAY]" <
>>> [email protected]> wrote:
>>>
>>>>
>>>>
>>>> Hector,
>>>>
>>>> I am not sure what the big deal is anyways shorted coils vfd's etc just
>>>> too much heat on load and hard on brushes during tuning, grung grung
>>>> grung.  I don't think it is patent-able because you already disclosed this
>>>> design publicly.   Also the device from 50's or 60's very close to it is an
>>>> expired patent...  I am surprised you are not tossing rocks.
>>>>
>>>> Like you said Norm gave some jewels here big time too.
>>>>
>>>> On other adventures, in order to induce hyperbolic motion in an
>>>> unloaded high impedance 3 phase device such as a Tesla coil set:
>>>>
>>>> Speaking from the aspects of control and field strength, Is this better
>>>> to use natural 3rds without the modulation or even harmonics and an odd
>>>> beat freq?
>>>>
>>>> The best way to get ones research stalled out is to show to a friend
>>>> from some frozen thought bank like a University EE or JPL "scientist" and
>>>> when the cognitive dissonance kicks in they start a freak show the light of
>>>> which one does not want to be reflected in.
>>>>
>>>>
>>>>
>>>>
>>>> On 5/13/2018 10:37 AM, [email protected] [EVGRAY] wrote:
>>>>
>>>>
>>>>
>>>> Collecting the information posted here over the years Looping has being
>>>> given by more than a dozen different persons here ,,, as With RV
>>>> disclosures people simply don't READ , Don't do the experiment & do not
>>>> Understand ....
>>>>
>>>> Norman has given you some JEWELS that are worth a kings ransom in his
>>>> NEUTRAL SPIKE disclosures , The COIL BANGER can be used to do research on
>>>> it , so there is NO excuse not to buy a $6.00 party xenon tube strobe board
>>>> and do some tests to create single shot spikes !
>>>> and so on with every disclosure here , the experimentation is the key !
>>>>
>>>> Along with the being development to handle the technology "force"...
>>>>
>>>> (H)
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>> 
>>
>

Boy did I frack that Tex up if you have trouble reading it you might need a
taro card reader !
On May 14, 2018 1:53 PM, "James Glinski" <[email protected]> wrote:

> This sounds a lot like the hivoltage between two pieces of carbon with a
> alignment magnetic coil around them to direct the beta radiation Thu the
> cabin to the wires the spark fills the carbon to boron and the it falls
> back to carbon releasing much energy as beta energy .being traveling at 62%
> the speed of light make a big EMF on impact considered to be the same as
> electric energy . even living this setup in line as a spark would or should
> jump your out put .but check for any radiation comming off .
> On May 14, 2018 1:45 PM, "James Glinski" <[email protected]> wrote:
>
>> I think I might have it .this goes back to those two Chinese guys who won
>> Nobel prizes back in what 1952 ? For the discovery of broken symmetry .by
>> using a high power pulse just right you can disrupt the balance of the
>> vacuum .and release the energy there to one degree or another .Tesla was
>> doing this with the big caps burning up wires causing a disruptive pulse
>> wave in the void releasing the energy. It's a lot like atom smashing
>> getting four times the energy back out but dirty . Lee I think was one of
>> the men who got the prize . it's the basis for much of the cold war weapon
>> development death ray .thank you for your help I'll go Thu it all.... shit
>> we need a better system of storage than Yahoo I can't even get on there any
>> more and if they die it all dies with them .
>> On May 14, 2018 10:57 AM, "Norman Wootan [email protected] [EVGRAY]" <
>> [email protected]> wrote:
>>
>>>
>>>
>>> James!  You asked if I had other papers on this phenomenon!  Hector and
>>> I have posted many times all the relevant documentation about this subject
>>> but as Hector said, You folks do not read and try to understand.  Please
>>> read all of the post that I recently (today) posted on this site.  At first
>>> you will say, Non of this makes sense.  You have to examine each piece f
>>> the puzzle to understand the big picture we are painting.  The tried and
>>> proven EMP producing (non nuclear) Flux compression generator is a classic
>>> case of taking a magnetically saturated inductor of very high Henry value
>>> and at super speed reduce its Henry value to zero.  The huge amount of
>>> energy therein contained is converted into an EMP or should I say a MEP
>>> (Magneto-Electric Pulse) which is the total inverse of the Electro-magnetic
>>> pulse.  Ole explained why the sting occurs from the Tesla experiments and
>>> are not shielded by Faraday cages.  The frequencies associated with the MEP
>>> are at frequencies same as Cosmic rays so have the penetrating power sort
>>> of like the Neutrino. Just as the holes in a microwave screen have to be
>>> small enough to block the associated frequency, the MEP is such high
>>> frequency that it penetrated even the solid metals since it can pass
>>> through the atomic latices.   This was a case of varying the inductance
>>> value of the inductor while it is saturated.  Now comes the case of varying
>>> the value of a capacitor while holding a charge.  Charles Yost, My friend
>>> who (RIP) published the Electric Spacecraft Journal, published an article,
>>> Encyclopedia Britannica, Variable Capacitor Device that produced over-unity
>>> DC from electrostatic input. The Hyde article (Rex-Research) gives great
>>> detail.  I built one and it does work.  The is where you change the
>>> capacitance value of a capacitor with a charge.  You make it inhale and
>>> exhale, so to speak.  The reason the Hyde Generator is over-unity is there
>>> is no Lenz Effect with the rotation of a variable capacitor.  Output (DC)
>>> far exceeded the energy needed to create the electrostatic charge.   I have
>>> posted the Felici Electrostatic Machine on here and did not get a single
>>> question on this incredible device.  Here is a case where you have HARD DC
>>> power output of 3000 watts at 300,000V all produced from a dielectric media
>>> of high pressure pure hydrogen gas.  I asked you where did the electrons
>>> come from?? As shown, the condenser/ capacitor stores it's charge in the
>>> electron displacement in the dielectric and not on the plates. The
>>> dielectric of the Felici Generator is the space vacuum or as we like to
>>> call it the aether.  The hydrogen gas is the transfer media.    Thank You
>>> Ole for you give learned though and explanations to our dialog.   As Hector
>>> has repeatedly stated, Please read and understand!   Jumping down from soap
>>> box now. Norm
>>>
>>> On 5/13/2018 6:46 PM, James Glinski [email protected] [EVGRAY] wrote:
>>>
>>>
>>>
>>> Norman do you have any more papers on this phenomena ? Or are they lost
>>> in Yahoo ?
>>> On May 13, 2018 3:37 PM, "James Glinski" <[email protected]> wrote:
>>>
>>>> So we can add a new work now ...ever increasing understanding . ....may
>>>> be some will come to understand and achieve the prize . and get the ice box
>>>> running .and sence your a proponent of this it should make you very happy
>>>> to see it come to fruition .
>>>> On May 13, 2018 2:51 PM, "Mick [email protected] [EVGRAY]" <
>>>> [email protected]> wrote:
>>>>
>>>>>
>>>>>
>>>>> Hector,
>>>>>
>>>>> I am not sure what the big deal is anyways shorted coils vfd's etc
>>>>> just too much heat on load and hard on brushes during tuning, grung grung
>>>>> grung.  I don't think it is patent-able because you already disclosed this
>>>>> design publicly.   Also the device from 50's or 60's very close to it is an
>>>>> expired patent...  I am surprised you are not tossing rocks.
>>>>>
>>>>> Like you said Norm gave some jewels here big time too.
>>>>>
>>>>> On other adventures, in order to induce hyperbolic motion in an
>>>>> unloaded high impedance 3 phase device such as a Tesla coil set:
>>>>>
>>>>> Speaking from the aspects of control and field strength, Is this
>>>>> better to use natural 3rds without the modulation or even harmonics and an
>>>>> odd beat freq?
>>>>>
>>>>> The best way to get ones research stalled out is to show to a friend
>>>>> from some frozen thought bank like a University EE or JPL "scientist" and
>>>>> when the cognitive dissonance kicks in they start a freak show the light of
>>>>> which one does not want to be reflected in.
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> On 5/13/2018 10:37 AM, [email protected] [EVGRAY] wrote:
>>>>>
>>>>>
>>>>>
>>>>> Collecting the information posted here over the years Looping has
>>>>> being given by more than a dozen different persons here ,,, as With RV
>>>>> disclosures people simply don't READ , Don't do the experiment & do not
>>>>> Understand ....
>>>>>
>>>>> Norman has given you some JEWELS that are worth a kings ransom in his
>>>>> NEUTRAL SPIKE disclosures , The COIL BANGER can be used to do research on
>>>>> it , so there is NO excuse not to buy a $6.00 party xenon tube strobe board
>>>>> and do some tests to create single shot spikes !
>>>>> and so on with every disclosure here , the experimentation is the key
>>>>> !
>>>>>
>>>>> Along with the being development to handle the technology "force"...
>>>>>
>>>>> (H)
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>> 
>>>
>>