loudspeaker cable pulse shaping

Hi Ole,

I was looking around for my calculator for deriving pulse shaping
networks and filters to use for loudspeakers and seem to have misplaced
it in digital oblivion.

I am pretty sure you posted a circuit for same sometime back wherefore
placing an inductive load close to the amp so was wondering if you can
recommend a calculator. 
A further complexity arises when adding a Zobel to the shaping inductor
as the impedance becomes much more complex due to additional peaking and
added IM distortion but that's another story and as we all know
electronic design is always a compromise.

Thanks,

Mick

Hi Ole,

Thank you, I was considering trying Mathcad or Cadabra or Axiom but now
that you recommend it for sure!

I seem to recall the Mathematica I used to use of a friend a long time
back who was a math professor required about a 500 dollar add on for
impedance and reactance network modeling, does Mathcad require
additional packages also?


On 7/19/2019 4:49 PM, [email protected] [EVGRAY] wrote:
>  
>
> Hi Mick,
>
> I use Mathcad as calculator. It has become too expensive and missing
> the animation ability so looking for an alternative. SMath Studio
> looks like Mathcad and is free
> (https://en.wikipedia.org/wiki/SMath_Studio). I like the animation
> function to simulate transmission line reflections and standing waves
> etc. It can also animate wave patterns like the force fields of the
> Rhythmodynamics theory. I actually haven't done those simulations much
> since discovering the Rhythmodynamics theory.
>
> The formulas are written like done on paper. The program then
> calculates the formula and puts the result after the equal to sign.
>
> Regards
> Ole
>
>
>
> ---In [email protected], <mkjekyll@...> wrote :
>
> Hi Ole,
>
> I was looking around for my calculator for deriving pulse shaping
> networks and filters to use for loudspeakers and seem to have misplaced
> it in digital oblivion.
>
> I am pretty sure you posted a circuit for same sometime back wherefore
> placing an inductive load close to the amp so was wondering if you can
> recommend a calculator. 
> A further complexity arises when adding a Zobel to the shaping inductor
> as the impedance becomes much more complex due to additional peaking and
> added IM distortion but that's another story and as we all know
> electronic design is always a compromise.
>
> Thanks,
>
> Mick
>

Hi Mick,

I use Mathcad as calculator. It has become too expensive and missing the animation ability so looking for an alternative. SMath Studio looks like Mathcad and is free (https://en.wikipedia.org/wiki/SMath_Studio https://en.wikipedia.org/wiki/SMath_Studio). I like the animation function to simulate transmission line reflections and standing waves etc. It can also animate wave patterns like the force fields of the Rhythmodynamics theory. I actually haven't done those simulations much since discovering the Rhythmodynamics theory.

The formulas are written like done on paper. The program then calculates the formula and puts the result after the equal to sign.

Regards
Ole
 

---In [email protected], <mkjekyll@...> wrote :

 Hi Ole,
 
 I was looking around for my calculator for deriving pulse shaping
 networks and filters to use for loudspeakers and seem to have misplaced
 it in digital oblivion.
 
 I am pretty sure you posted a circuit for same sometime back wherefore
 placing an inductive load close to the amp so was wondering if you can
 recommend a calculator. 
 A further complexity arises when adding a Zobel to the shaping inductor
 as the impedance becomes much more complex due to additional peaking and
 added IM distortion but that's another story and as we all know
 electronic design is always a compromise.
 
 Thanks,
 
 Mick

Hi Mr ogre troll from oz
Well you are half right about what you wtite...concerning Muller motor generator designs, the Adams motors compsrison (not)...The SS and FP motors and designs how they all function, what they can do which is better or worse and what the heck is really going on and what has been done already on the subject of motors spiining genetators,and generators spinning motors and leftover power, loopers, how things really work, what they teach in schools and textbooks,  of all that what is true, what they intentionally teach for to avoid people learning too much...on and on I go but  you are only half correct...three halves make sthe truth we know and there is the half we have been taught shoved down our brains...then there is the half we.learn through experience ehich is true but sometimes who and self deception cloud it,  Then there is the final half we know nothing about cannot explain or can possibly understand so what is true in our minds s combo of these three halves, and only two can exist at same time due yo duality ding and dong to be a whole truth so the mind juggles them around...anyways what you know about Muller generators is in the first category for you of "what you have been taught to think" also the SS And FP motors too as your experience is Morin videos (I think he is way off personally) and what Joe shows you of what he does...also here you are being taught only what Joe wants you to know...
Anyways all bullshit what I wrote making it up as I type haha fooled you Mr ogre but just want to say at that conference for Tessa  tech, bring throat lozenges you will be approached from all sides everyone wllwant to talk you ...i did those conferences twice people tell you things they know they would never say in emails or phone looping machines everywhere of all designs who to believe who to take serious up to you look out getting chipped or mind fucked by agents who come across  as nice people maybe offering you a farm...dont betray Joe eh keep him alive most important
Kone

Ego and self deception not who and self deception correction

Hi Mick,

There is a Mathcad community where work sheets can be shared: https://community.ptc.com/t5/PTC-Mathcad/bd-p/PTCMathcad https://community.ptc.com/t5/PTC-Mathcad/bd-p/PTCMathcad. There are also libraries with worksheets for different engineering disciplines. But it is easy to build your own calculation sheets. What I find very good in Mathcad is that the units are calculated automatic. If the units don't match there is something wrong in the formula. This adds some extra error catch. Mathcad can also calculate with imperial units besides the SI units and it's even possible to create customized units.

I think Mathcad has become too expensive. For the annual license fee you can buy lots of physical calculators. Of course they're not as flexible as a Mathcad worksheet with its good overview. I still use the old Mathcad 15.0. It is locked to the computer but works without paying the annual fee of the modern versions. PTC that now owns Mathcad are quite expensive except if you make your living by using the software. Mathcad is very time saving when doing calculations and everything is documented if saving the worksheets.

Regards
Ole
 

---In [email protected], <mkjekyll@...> wrote :

 Hi Ole, 

 Thank you, I was considering trying Mathcad or Cadabra or Axiom but now that you recommend it for sure!
 I seem to recall the Mathematica I used to use of a friend a long time back who was a math professor required about a 500 dollar add on for impedance and reactance network modeling, does Mathcad require additional packages also?

 

 On 7/19/2019 4:49 PM, onielsen@... mailto:onielsen@... [EVGRAY] wrote:

   Hi Mick,
 
 I use Mathcad as calculator. It has become too expensive and missing the animation ability so looking for an alternative. SMath Studio looks like Mathcad and is free (https://en.wikipedia.org/wiki/SMath_Studio https://en.wikipedia.org/wiki/SMath_Studio). I like the animation function to simulate transmission line reflections and standing waves etc. It can also animate wave patterns like the force fields of the Rhythmodynamics theory. I actually haven't done those simulations much since discovering the Rhythmodynamics theory.
 
 The formulas are written like done on paper. The program then calculates the formula and puts the result after the equal to sign.
 
 Regards
 Ole

 
 
 ---In [email protected] mailto:[email protected], <mkjekyll@...> mailto:mkjekyll@... wrote :
 
 Hi Ole,
 
 I was looking around for my calculator for deriving pulse shaping
 networks and filters to use for loudspeakers and seem to have misplaced
 it in digital oblivion.
 
 I am pretty sure you posted a circuit for same sometime back wherefore
 placing an inductive load close to the amp so was wondering if you can
 recommend a calculator. 
 A further complexity arises when adding a Zobel to the shaping inductor
 as the impedance becomes much more complex due to additional peaking and
 added IM distortion but that's another story and as we all know
 electronic design is always a compromise.
 
 Thanks,
 
 Mick

DougIt is confusing alright.However, chipping away at that space between known, and unknown, is up to each of us, as we are able.Teachers, in the schools, try, for the most part, to give students the basic tools to look at the physical world, in a way that might be useful to them.We come equipped with these mental tools into the World, finding that generally, they do work as advertised. But, as we have been trained to take up our parts, like happy little bees, we see cracks in the various structures, in this solid foundation of facts we have been issued.Besides finding out that Santa Claus is a myth, we find out that diploma is just a piece of paper, and the real fact is, we will be in school for the rest of our lives.Sometimes we have the job of being teachers, and then, we are students. It becomes the social normal development of us, as functional people, our Ego, and ID, cycling like AC current, throughout our lives, learning, and teaching, as we are alive.There is no organized master, trying to hold the reins, and control the population of the Earth, though, some dilusionally sick egos do get out of control, from time, to time, liking too much that moment of honour, that goes with that spark discharge of being the teacher, long after the event has passed.The ID, the creative aspect of our personalities, is the most interesting aspect of us all. It is the self directed learning process, where we explore the world around us to investigate how it works, or dosen't, and compare our findings with others to develop a new set of rules stating what reality is. For just a moment, again!You can get a real buzz from making yourself a machine that keeps right on running, and running, way beyond the Ever ready Bunny.It is fun.Tesla said something about harnessing the wheel works of the Universe, or something to that effect.Yes, I get it, and so do a lot of us in this groupThis is art, and if it is not, I don't know what art is.Cheers Warren
Sent from Yahoo Mail on Android 
 
  On Sat., 20 Jul. 2019 at 3:37 a.m., [email protected] [EVGRAY]<[email protected]> wrote:       
Hi Mr ogre troll from oz
Well you are half right about what you wtite...concerning Muller motor generator designs, the Adams motors compsrison (not)...The SS and FP motors and designs how they all function, what they can do which is better or worse and what the heck is really going on and what has been done already on the subject of motors spiining genetators,and generators spinning motors and leftover power, loopers, how things really work, what they teach in schools and textbooks, of all that what is true, what they intentionally teach for to avoid people learning too much...on and on I go but you are only half correct...three halves make sthe truth we know and there is the half we have been taught shoved down our brains...then there is the half we.learn through experience ehich is true but sometimes who and self deception cloud it, Then there is the final half we know nothing about cannot explain or can possibly understand so what is true in our minds s combo of these three halves, and only two can exist at same time due yo duality ding and dong to be a whole truth so the mind juggles them around...anyways what you know about Muller generators is in the first category for you of "what you have been taught to think" also the SS And FP motors too as your experience is Morin videos (I think he is way off personally) and what Joe shows you of what he does...also here you are being taught only what Joe wants you to know...
Anyways all bullshit what I wrote making it up as I type haha fooled you Mr ogre but just want to say at that conference for Tessa tech, bring throat lozenges you will be approached from all sides everyone wllwant to talk you ...i did those conferences twice people tell you things they know they would never say in emails or phone looping machines everywhere of all designs who to believe who to take serious up to you look out getting chipped or mind fucked by agents who come across as nice people maybe offering you a farm...dont betray Joe eh keep him alive most important
Kone
  #yiv8723689822 #yiv8723689822 -- #yiv8723689822ygrp-mkp {border:1px solid #d8d8d8;font-family:Arial;margin:10px 0;padding:0 10px;}#yiv8723689822 #yiv8723689822ygrp-mkp hr {border:1px solid #d8d8d8;}#yiv8723689822 #yiv8723689822ygrp-mkp #yiv8723689822hd {color:#628c2a;font-size:85%;font-weight:700;line-height:122%;margin:10px 0;}#yiv8723689822 #yiv8723689822ygrp-mkp #yiv8723689822ads {margin-bottom:10px;}#yiv8723689822 #yiv8723689822ygrp-mkp .yiv8723689822ad {padding:0 0;}#yiv8723689822 #yiv8723689822ygrp-mkp .yiv8723689822ad p {margin:0;}#yiv8723689822 #yiv8723689822ygrp-mkp .yiv8723689822ad a {color:#0000ff;text-decoration:none;}#yiv8723689822 #yiv8723689822ygrp-sponsor #yiv8723689822ygrp-lc {font-family:Arial;}#yiv8723689822 #yiv8723689822ygrp-sponsor #yiv8723689822ygrp-lc #yiv8723689822hd {margin:10px 0px;font-weight:700;font-size:78%;line-height:122%;}#yiv8723689822 #yiv8723689822ygrp-sponsor #yiv8723689822ygrp-lc .yiv8723689822ad {margin-bottom:10px;padding:0 0;}#yiv8723689822 #yiv8723689822actions {font-family:Verdana;font-size:11px;padding:10px 0;}#yiv8723689822 #yiv8723689822activity {background-color:#e0ecee;float:left;font-family:Verdana;font-size:10px;padding:10px;}#yiv8723689822 #yiv8723689822activity span {font-weight:700;}#yiv8723689822 #yiv8723689822activity span:first-child {text-transform:uppercase;}#yiv8723689822 #yiv8723689822activity span a {color:#5085b6;text-decoration:none;}#yiv8723689822 #yiv8723689822activity span span {color:#ff7900;}#yiv8723689822 #yiv8723689822activity span .yiv8723689822underline {text-decoration:underline;}#yiv8723689822 .yiv8723689822attach {clear:both;display:table;font-family:Arial;font-size:12px;padding:10px 0;width:400px;}#yiv8723689822 .yiv8723689822attach div a {text-decoration:none;}#yiv8723689822 .yiv8723689822attach img {border:none;padding-right:5px;}#yiv8723689822 .yiv8723689822attach label {display:block;margin-bottom:5px;}#yiv8723689822 .yiv8723689822attach label a {text-decoration:none;}#yiv8723689822 blockquote {margin:0 0 0 4px;}#yiv8723689822 .yiv8723689822bold {font-family:Arial;font-size:13px;font-weight:700;}#yiv8723689822 .yiv8723689822bold a {text-decoration:none;}#yiv8723689822 dd.yiv8723689822last p a {font-family:Verdana;font-weight:700;}#yiv8723689822 dd.yiv8723689822last p span {margin-right:10px;font-family:Verdana;font-weight:700;}#yiv8723689822 dd.yiv8723689822last p span.yiv8723689822yshortcuts {margin-right:0;}#yiv8723689822 div.yiv8723689822attach-table div div a {text-decoration:none;}#yiv8723689822 div.yiv8723689822attach-table {width:400px;}#yiv8723689822 div.yiv8723689822file-title a, #yiv8723689822 div.yiv8723689822file-title a:active, #yiv8723689822 div.yiv8723689822file-title a:hover, #yiv8723689822 div.yiv8723689822file-title a:visited {text-decoration:none;}#yiv8723689822 div.yiv8723689822photo-title a, #yiv8723689822 div.yiv8723689822photo-title a:active, #yiv8723689822 div.yiv8723689822photo-title a:hover, #yiv8723689822 div.yiv8723689822photo-title a:visited {text-decoration:none;}#yiv8723689822 div#yiv8723689822ygrp-mlmsg #yiv8723689822ygrp-msg p a span.yiv8723689822yshortcuts {font-family:Verdana;font-size:10px;font-weight:normal;}#yiv8723689822 .yiv8723689822green {color:#628c2a;}#yiv8723689822 .yiv8723689822MsoNormal {margin:0 0 0 0;}#yiv8723689822 o {font-size:0;}#yiv8723689822 #yiv8723689822photos div {float:left;width:72px;}#yiv8723689822 #yiv8723689822photos div div {border:1px solid #666666;min-height:62px;overflow:hidden;width:62px;}#yiv8723689822 #yiv8723689822photos div label {color:#666666;font-size:10px;overflow:hidden;text-align:center;white-space:nowrap;width:64px;}#yiv8723689822 #yiv8723689822reco-category {font-size:77%;}#yiv8723689822 #yiv8723689822reco-desc {font-size:77%;}#yiv8723689822 .yiv8723689822replbq {margin:4px;}#yiv8723689822 #yiv8723689822ygrp-actbar div a:first-child {margin-right:2px;padding-right:5px;}#yiv8723689822 #yiv8723689822ygrp-mlmsg {font-size:13px;font-family:Arial, helvetica, clean, sans-serif;}#yiv8723689822 #yiv8723689822ygrp-mlmsg table {font-size:inherit;font:100%;}#yiv8723689822 #yiv8723689822ygrp-mlmsg select, #yiv8723689822 input, #yiv8723689822 textarea {font:99% Arial, Helvetica, clean, sans-serif;}#yiv8723689822 #yiv8723689822ygrp-mlmsg pre, #yiv8723689822 code {font:115% monospace;}#yiv8723689822 #yiv8723689822ygrp-mlmsg * {line-height:1.22em;}#yiv8723689822 #yiv8723689822ygrp-mlmsg #yiv8723689822logo {padding-bottom:10px;}#yiv8723689822 #yiv8723689822ygrp-msg p a {font-family:Verdana;}#yiv8723689822 #yiv8723689822ygrp-msg p#yiv8723689822attach-count span {color:#1E66AE;font-weight:700;}#yiv8723689822 #yiv8723689822ygrp-reco #yiv8723689822reco-head {color:#ff7900;font-weight:700;}#yiv8723689822 #yiv8723689822ygrp-reco {margin-bottom:20px;padding:0px;}#yiv8723689822 #yiv8723689822ygrp-sponsor #yiv8723689822ov li a {font-size:130%;text-decoration:none;}#yiv8723689822 #yiv8723689822ygrp-sponsor #yiv8723689822ov li {font-size:77%;list-style-type:square;padding:6px 0;}#yiv8723689822 #yiv8723689822ygrp-sponsor #yiv8723689822ov ul {margin:0;padding:0 0 0 8px;}#yiv8723689822 #yiv8723689822ygrp-text {font-family:Georgia;}#yiv8723689822 #yiv8723689822ygrp-text p {margin:0 0 1em 0;}#yiv8723689822 #yiv8723689822ygrp-text tt {font-size:120%;}#yiv8723689822 #yiv8723689822ygrp-vital ul li:last-child {border-right:none !important;}#yiv8723689822

Well Mr Kone. You too are half right. I went to Tessa tech the last 2 years running. Acting as Associate of Joe, no one gets past me without a thorough investigation before introduction. Yes I met the shady ones, One was a strikingly pretty blond. I made her buy dinner and pay the motel room bill in exchange for a Platinum Crystal Medallion. Yes honey traps are everywhere but I didnt get sticky. Talked my head off, and Steve just wanted to get it on DVD. The only guy I managed to infuriate was no doubt a spy. You can just smell em. They stink. He came at me from the holier than thou position of bible quoting 'Lifer' trying to impress me on the finer points of humanity. As always attack is the best defence when one has the Superior Technological Ground. It was like the last 2 months of evgray all rolled up into one day. I was polite, talked softly, answered everyone's questions to the best of my ability and still they held onto their marble theories. I sold lots of products like the White and SilverJoeCells, orb upgrades, crystal wands, Crystal Jewellery (Atlantean of course) and demonstrated the Neutral Washer effect between two ring magnets or how to amplify Gauss by a factor of 5 when adding 2 magnets together which science says cant be done or the how to join a broken magnet back together that the green card says there's no break in fields, again science says it cant be done. It was a good fun time. Joe did not approve my attendance at the conference. And he was right again of course. I was hoping Norm would call Joe on the phone to find out what he's been seeking all this time. When he declined to talk to a guy that could answer his every question, I changed my itinerary and went to Deadwood rather than Albuquerque. If I didnt have some backup, whats the point of beating my head against the wall a third time. Still Steve has another DVD dust collector to add to his collection. I have seen several ‘inventors’ take a nearly working device to Joe and he shows them how to make it work without even being told what the contraption is. Some fly half way around the world to talk to Joe and get insights. Norm prefers to stay his course. He can do it by phone as well. As can all those who are gifted with these insights.  
 Whats on offer here is the chance to participate in the introduction of Radiant Energy from the Aether that’s as unlimited as a Samsung is not understood. Creepy isn’t it?  Finally a door has appeared into the Unlimited and Unknown. A real twilight zone. If I read the history right, then why did Norm sell his evgray motors to Canada? If Joe can do it with Junk salvaged from the scrap dealers why couldn’t Norm?  If you need $$ you aren’t thinking right. What is wrong with this picture? Having all the answers and shoving them down your throats (and mich, warrens Norm and cowporns) didn’t work either. NOTHING WORKS. Except that which sits on Joe’s Bench.

Ole,

I was checking it out and everything looked super until I realized the
cost, wow $620 a year, is the express free version better than SMath for
simple electrical network engineering or do they limit the capabilities
too much in Express?

Apps have become so vast trying each one out can take days and days so
it's better to ask like minded people prior to investing the time then
finding out it does everything one needs except the final calc where one
derives the reactance of the part then asks one to buy the retail
version fro that function.  I hate when that happens.

On 7/20/2019 4:31 AM, [email protected] [EVGRAY] wrote:
>  
>
> Hi Mick,
>
> There is a Mathcad community where work sheets can be shared:
> https://community.ptc.com/t5/PTC-Mathcad/bd-p/PTCMathcad. There are
> also libraries with worksheets for different engineering disciplines.
> But it is easy to build your own calculation sheets. What I find very
> good in Mathcad is that the units are calculated automatic. If the
> units don't match there is something wrong in the formula. This adds
> some extra error catch. Mathcad can also calculate with imperial units
> besides the SI units and it's even possible to create customized units.
>
> I think Mathcad has become too expensive. For the annual license fee
> you can buy lots of physical calculators. Of course they're not as
> flexible as a Mathcad worksheet with its good overview. I still use
> the old Mathcad 15.0. It is locked to the computer but works without
> paying the annual fee of the modern versions. PTC that now owns
> Mathcad are quite expensive except if you make your living by using
> the software. Mathcad is very time saving when doing calculations and
> everything is documented if saving the worksheets.
>
> Regards
> Ole
>
>
>
> ---In [email protected], <mkjekyll@...> wrote :
>
> Hi Ole,
>
> Thank you, I was considering trying Mathcad or Cadabra or Axiom but
> now that you recommend it for sure!
>
> I seem to recall the Mathematica I used to use of a friend a long time
> back who was a math professor required about a 500 dollar add on for
> impedance and reactance network modeling, does Mathcad require
> additional packages also?
>
>
> On 7/19/2019 4:49 PM, onielsen@... <mailto:onielsen@...> [EVGRAY] wrote:
>
>>      
>>
>>     Hi Mick,
>>
>>     I use Mathcad as calculator. It has become too expensive and
>>     missing the animation ability so looking for an alternative.
>>     SMath Studio looks like Mathcad and is free
>>     (https://en.wikipedia.org/wiki/SMath_Studio). I like the
>>     animation function to simulate transmission line reflections and
>>     standing waves etc. It can also animate wave patterns like the
>>     force fields of the Rhythmodynamics theory. I actually haven't
>>     done those simulations much since discovering the Rhythmodynamics
>>     theory.
>>
>>     The formulas are written like done on paper. The program then
>>     calculates the formula and puts the result after the equal to sign.
>>
>>     Regards
>>     Ole
>>
>>
>>
>>     ---In [email protected] <mailto:[email protected]>,
>>     <mkjekyll@...> <mailto:mkjekyll@...> wrote :
>>
>>     Hi Ole,
>>
>>     I was looking around for my calculator for deriving pulse shaping
>>     networks and filters to use for loudspeakers and seem to have
>>     misplaced
>>     it in digital oblivion.
>>
>>     I am pretty sure you posted a circuit for same sometime back
>>     wherefore
>>     placing an inductive load close to the amp so was wondering if
>>     you can
>>     recommend a calculator. 
>>     A further complexity arises when adding a Zobel to the shaping
>>     inductor
>>     as the impedance becomes much more complex due to additional
>>     peaking and
>>     added IM distortion but that's another story and as we all know
>>     electronic design is always a compromise.
>>
>>     Thanks,
>>
>>     Mick
>
>

Says Kone
 "your experience is Morin videos (I think he is way off personally) and what Joe shows you of what he does...also here you are being taught only what Joe wants you to know..."
 

 This isnt quite right and needs clarifying. .
 

 I have helped build in Joe's workshop, several motors in the last decade. Ive got pictures of them. They were all 'standard' stuff or low over unity designs. The only thing setting them apart from the many designs on the net was the Magnetic Shielding which Joe didnt want the world to know about yet.
 

 He/We've been playing with the FP/SS design for about 8 years. I disassembled about 20 overhead ceiling fan motors and these can be turned into a SS/FP like motor with the addition of magnets around the outside. All were prototypes to the design on the bench last weekend. He has some that spin other motors without a drive shaft, just by eddy currents to generate Cold Electricity is the word everyone seems to understand. Then there is the pack of poker card sized solid state generators with just a few electric components inside. They too work as a multiplier when next to each other. What he has and from what I have said in the past is no less that out of this world. Its not can he, but take your pick. ALL for just a farm. 

 

 After the 3 hours of hand warming Cold Electricity generator demo, we then went into watch some Youtube vids. Joe chose Morin and I had NEVER heard of him before. What Morin said could be possible exists as a working prototype. Joe said that Morin was a genius. I saw nothing of Morin I disagreed with. Take another look Kone. 

 

 Morins expose on the Smart Meters is spot on and its implications are what led the Power Stations of the world to be all privately owned. By the Chinese here in OZ no less. The power companies feed power into the EARTH line and the plugs cannot have a earth pin or its shorts the fuse in the fuse box. Joe paid 1000's to learn this fact as the sink disposal unit was 'grounded' about 5 years ago. Now Morin shows us why. Its all for these SS and FP type motors that feed back power into the grid. They are a motor generator in one if you use a battery in the loop or the grid. Yes Joe only shows me what he wants me to know, but I do have a special arrangement in that I get answers to any questions I can think of. Wouldnt it be nice to eat from my table instead?

 

 Joe showed me Morin as a guy ahead of the pack of private investigators of the world but barely discernible in our dust. He also used Morin to think of more Unique ways to do Cold Electricity so as to NOT infringe on any other design. You need to get on board with this Kone. What are you going to say to your friends when its finally released to the world and they find out you "didnt like the tone"? They might have the spare grand to participate. What did 2500 people join this group for? If you dont see that this is it, then Warring will get his spam filter effect.Heck can lick arse and Mich will always be creepy... These are the plans I referred to in any previous 'offer'. Joe and I cannot do it alone. It takes a group of people who know what this is about and it aint Marks of the Beast (yet). Its kicking the Money changers out of the Temple. But thats anutther story.
 

 So can we get past this fact that youse all build boat anchors, havent a clue what and how Liquid Electricity is and made, pat each other on the back for incompetence and I just happen to point this out???? Who is gonna tell ya if I dont? Warring the troll spotter? OK thats the last of that tone....  I promise. 

 

 Would anyone like to hear about the colony of Trolls that live in the Liverpool Ranges a few miles south of where I live? A real live Troll Colony?

Mr incredibly bad scientist.
I think Morin is full of shit I watch his long winded  videos he has Meter in AC amps measuring DC says look its overunity.  I wrote him point out obvious mistake he doesn't respond  leaves videos up. If joe tninks he is genius good for that i dont think so i tbink he wants alot of investors uses ypu tube to get it...if he did what he says he can do he would be killed or silenced there's the paradox of all this.
The FP and SS motors are some good off shelf shit I agree i have two back in states I know someone who looped them as they drive ecm generators and the unit powers a yacht. I know someone replicating this  too who has many YouTube videos up. ( Don Smith#205)
They should be adaptable to single phase rotovertor mode too probably what 3 wire FP motor is...
Muller design twice as good since both sides of magnets do work for twice the power and if you stack units on axle both sides of coils do work for twice the power again forbade input..  Also you should use strongest magnets possible and suitable core material too...FP motors stuck with slow as shit  steel cores and weak magnets it can only go so far.
Bill Muller way ahead of his time years before internet know it alls trashed him Bill didn't care he would just say you can all kiss my ass
Look up Romero UK for Looper design. A guy looped one in Norway using rotovertor motor. 
What good is Joe to rest of world  if he keeps secrets? Are secrets kept to keep him alive or get him killed to make sure this secrets don't come out? Nobody is going to give you a farm or will you get 1000bucks from anyone here for bits of info. You remind me of holier than thou bible thumper threatening we Will be burning in hell if we do not worship Joe and repent all our ignorance of Joe Cell tech...and .how to repent is give you 1000bucks or better still give you your dream farm where you can raise chickens and cows for cow porn not sure what you can do with the chickens
Kone

Hi Mick,

I don't know about the modern Mathcad express version. But in the old ones new worksheets couldn't be created. It was allowed to change numbers in formulas but not possible to add new formulas or perhaps it was just saving that was blocked. That I have forgotten.

It is a pity that PTC bought Mathcad and changed the pricing to an annual fee and in some ways made a worse version. Hopefully they develop it to become as useful as Mathcad 15.

SMath Studio is only partly compatible with Mathcad worksheets: https://www.google.dk/search?source=hp&ei=KD0zXZunJoLHwQKDl4e4BQ&q=smath+mathcad+compatibility&oq=smath+compat&gs_l=psy-ab.3.0.0i22i30.1349.69864093..69866750...0.0..0.143.2023.12j8......0....1..gws-wiz.....0..0j0i131j0i10j0i13j0i13i30j0i13i10i30j33i160.NhDSyRMyC5E https://www.google.dk/search?source=hp&ei=KD0zXZunJoLHwQKDl4e4BQ&q=smath+mathcad+compatibility&oq=smath+compat&gs_l=psy-ab.3.0.0i22i30.1349.69864093..69866750...0.0..0.143.2023.12j8......0....1..gws-wiz.....0..0j0i131j0i10j0i13j0i13i30j0i13i10i30j33i160.NhDSyRMyC5E. Parts of the Mathcad worksheets may be missing when loaded into SMath Studio. But SMath Studio is very young compered to Mathcad with all it versions.

Regards
Ole



 

---In [email protected], <mkjekyll@...> wrote :

 Ole,
 I was checking it out and everything looked super until I realized the cost, wow $620 a year, is the express free version better than SMath for simple electrical network engineering or do they limit the capabilities too much in Express?
 Apps have become so vast trying each one out can take days and days so it's better to ask like minded people prior to investing the time then finding out it does everything one needs except the final calc where one derives the reactance of the part then asks one to buy the retail version fro that function.  I hate when that happens.

 On 7/20/2019 4:31 AM, onielsen@... mailto:onielsen@... [EVGRAY] wrote:

   Hi Mick,
 
 There is a Mathcad community where work sheets can be shared: https://community.ptc.com/t5/PTC-Mathcad/bd-p/PTCMathcad https://community.ptc.com/t5/PTC-Mathcad/bd-p/PTCMathcad. There are also libraries with worksheets for different engineering disciplines. But it is easy to build your own calculation sheets. What I find very good in Mathcad is that the units are calculated automatic. If the units don't match there is something wrong in the formula. This adds some extra error catch. Mathcad can also calculate with imperial units besides the SI units and it's even possible to create customized units.
 
 I think Mathcad has become too expensive. For the annual license fee you can buy lots of physical calculators. Of course they're not as flexible as a Mathcad worksheet with its good overview. I still use the old Mathcad 15.0. It is locked to the computer but works without paying the annual fee of the modern versions. PTC that now owns Mathcad are quite expensive except if you make your living by using the software. Mathcad is very time saving when doing calculations and everything is documented if saving the worksheets.
 
 Regards
 Ole

 
 
 ---In [email protected] mailto:[email protected], <mkjekyll@...> mailto:mkjekyll@... wrote :
 
 Hi Ole, 

 Thank you, I was considering trying Mathcad or Cadabra or Axiom but now that you recommend it for sure!
 I seem to recall the Mathematica I used to use of a friend a long time back who was a math professor required about a 500 dollar add on for impedance and reactance network modeling, does Mathcad require additional packages also?

 

 On 7/19/2019 4:49 PM, onielsen@... mailto:onielsen@... [EVGRAY] wrote:

   Hi Mick,
 
 I use Mathcad as calculator. It has become too expensive and missing the animation ability so looking for an alternative. SMath Studio looks like Mathcad and is free (https://en.wikipedia.org/wiki/SMath_Studio https://en.wikipedia.org/wiki/SMath_Studio). I like the animation function to simulate transmission line reflections and standing waves etc. It can also animate wave patterns like the force fields of the Rhythmodynamics theory. I actually haven't done those simulations much since discovering the Rhythmodynamics theory.
 
 The formulas are written like done on paper. The program then calculates the formula and puts the result after the equal to sign.
 
 Regards
 Ole

 
 
 ---In [email protected] mailto:[email protected], <mkjekyll@...> mailto:mkjekyll@... wrote :
 
 Hi Ole,
 
 I was looking around for my calculator for deriving pulse shaping
 networks and filters to use for loudspeakers and seem to have misplaced
 it in digital oblivion.
 
 I am pretty sure you posted a circuit for same sometime back wherefore
 placing an inductive load close to the amp so was wondering if you can
 recommend a calculator. 
 A further complexity arises when adding a Zobel to the shaping inductor
 as the impedance becomes much more complex due to additional peaking and
 added IM distortion but that's another story and as we all know
 electronic design is always a compromise.
 
 Thanks,
 
 Mick

Hi Kone,

You're absolutely right about Gerard Morin https://www.youtube.com/channel/UCsiwv99k0t62ARYwDuytnjA/featured. I have seen some of his videos and stopped wasting time on them. Unless he has learned something he doesn't know how to do proper measurements and doesn't know the capabilities of his instruments. Thus he is cheating himself and his audience if they believe he is truthful. If he has made a self-runner that wouldn't require measurements to prove his point that would be fine. Else it's not worth spending time on him.

Regards
Ole
 

---In [email protected], <konehead@...> wrote :

 Mr incredibly bad scientist.
 I think Morin is full of shit I watch his long winded videos he has Meter in AC amps measuring DC says look its overunity. I wrote him point out obvious mistake he doesn't respond leaves videos up. If joe tninks he is genius good for that i dont think so i tbink he wants alot of investors uses ypu tube to get it...if he did what he says he can do he would be killed or silenced there's the paradox of all this.
 The FP and SS motors are some good off shelf shit I agree i have two back in states I know someone who looped them as they drive ecm generators and the unit powers a yacht. I know someone replicating this too who has many YouTube videos up. ( Don Smith#205)
 They should be adaptable to single phase rotovertor mode too probably what 3 wire FP motor is...
 Muller design twice as good since both sides of magnets do work for twice the power and if you stack units on axle both sides of coils do work for twice the power again forbade input.. Also you should use strongest magnets possible and suitable core material too...FP motors stuck with slow as shit steel cores and weak magnets it can only go so far.
 Bill Muller way ahead of his time years before internet know it alls trashed him Bill didn't care he would just say you can all kiss my ass
 Look up Romero UK for Looper design. A guy looped one in Norway using rotovertor motor. 
 What good is Joe to rest of world if he keeps secrets? Are secrets kept to keep him alive or get him killed to make sure this secrets don't come out? Nobody is going to give you a farm or will you get 1000bucks from anyone here for bits of info. You remind me of holier than thou bible thumper threatening we Will be burning in hell if we do not worship Joe and repent all our ignorance of Joe Cell tech...and .how to repent is give you 1000bucks or better still give you your dream farm where you can raise chickens and cows for cow porn not sure what you can do with the chickens
 Kone

Hi Ole 
Yup i agree...
who knows he might make a Looper just from not knowing his meters so he doesn't worry about it.
Kone