Re: [EVGRAY] Washer motor

Hi Warren,

Do you know the circuit for generating the radio frequencies at 400V 3ph?
Thanks.

JonathanCheck with Patrick Kelly.He is about to publish a revised version of his chapter 32 based on the latest circuit details, as developed by a group of people working on this device.It is not an exotic circuit. An Arduino Uno is used to direct everything, and Patrick provides the code, plus a downloadable version in his Ebook, which is free on line.The 400 volt dc supply is simply turned on, and off, using the Arduino which senses the position of rotation, and applies the sharp spikes at a very precise point, to the coils, in sequence. No hall effects are used, or needed.The 400 volt supply can be produced any number of ways, and even made adjustable. So far, there are at least six people with units on the go and no smoke, so far.
I just printed the schematic from Patrick's site, so I'd have to scan it.There are quite a few pages with a complete detailed instruction for everything, well laid out, with photos and drawings, so even beginners might be able to build one. There is a person in Sweden, who is arranging a kit of machined parts to be sold, at cost, and organizing a buying consortium for a group purchase of stuff.The group is dedicated to making it all public, and distributing everything, in as low a cost as possible, much in the way the Arduino came to be.Myself, I am all together mechanically, with my motor generator, have my Arduino Uno, and the old circuit, but need to change parts of it with the new modifications, before I test it out.Several components are still to be delivered by mail, but those chips are now being changed, for an upgraded version that is
Sent from Yahoo Mail on Android 
 
  On Wed., 1 May 2019 at 11:36 p.m., Jonathan Rivera [email protected] [EVGRAY]<[email protected]> wrote:       

Hi Warren,
Do you know the circuit for generating the radio frequencies at 400V 3ph? Thanks.  #yiv3065753650 #yiv3065753650 -- #yiv3065753650ygrp-mkp {border:1px solid #d8d8d8;font-family:Arial;margin:10px 0;padding:0 10px;}#yiv3065753650 #yiv3065753650ygrp-mkp hr {border:1px solid #d8d8d8;}#yiv3065753650 #yiv3065753650ygrp-mkp #yiv3065753650hd {color:#628c2a;font-size:85%;font-weight:700;line-height:122%;margin:10px 0;}#yiv3065753650 #yiv3065753650ygrp-mkp #yiv3065753650ads {margin-bottom:10px;}#yiv3065753650 #yiv3065753650ygrp-mkp .yiv3065753650ad {padding:0 0;}#yiv3065753650 #yiv3065753650ygrp-mkp .yiv3065753650ad p {margin:0;}#yiv3065753650 #yiv3065753650ygrp-mkp .yiv3065753650ad a {color:#0000ff;text-decoration:none;}#yiv3065753650 #yiv3065753650ygrp-sponsor #yiv3065753650ygrp-lc {font-family:Arial;}#yiv3065753650 #yiv3065753650ygrp-sponsor #yiv3065753650ygrp-lc #yiv3065753650hd {margin:10px 0px;font-weight:700;font-size:78%;line-height:122%;}#yiv3065753650 #yiv3065753650ygrp-sponsor #yiv3065753650ygrp-lc .yiv3065753650ad {margin-bottom:10px;padding:0 0;}#yiv3065753650 #yiv3065753650actions {font-family:Verdana;font-size:11px;padding:10px 0;}#yiv3065753650 #yiv3065753650activity {background-color:#e0ecee;float:left;font-family:Verdana;font-size:10px;padding:10px;}#yiv3065753650 #yiv3065753650activity span {font-weight:700;}#yiv3065753650 #yiv3065753650activity span:first-child {text-transform:uppercase;}#yiv3065753650 #yiv3065753650activity span a {color:#5085b6;text-decoration:none;}#yiv3065753650 #yiv3065753650activity span span {color:#ff7900;}#yiv3065753650 #yiv3065753650activity span .yiv3065753650underline {text-decoration:underline;}#yiv3065753650 .yiv3065753650attach {clear:both;display:table;font-family:Arial;font-size:12px;padding:10px 0;width:400px;}#yiv3065753650 .yiv3065753650attach div a {text-decoration:none;}#yiv3065753650 .yiv3065753650attach img {border:none;padding-right:5px;}#yiv3065753650 .yiv3065753650attach label {display:block;margin-bottom:5px;}#yiv3065753650 .yiv3065753650attach label a {text-decoration:none;}#yiv3065753650 blockquote {margin:0 0 0 4px;}#yiv3065753650 .yiv3065753650bold {font-family:Arial;font-size:13px;font-weight:700;}#yiv3065753650 .yiv3065753650bold a {text-decoration:none;}#yiv3065753650 dd.yiv3065753650last p a {font-family:Verdana;font-weight:700;}#yiv3065753650 dd.yiv3065753650last p span {margin-right:10px;font-family:Verdana;font-weight:700;}#yiv3065753650 dd.yiv3065753650last p span.yiv3065753650yshortcuts {margin-right:0;}#yiv3065753650 div.yiv3065753650attach-table div div a {text-decoration:none;}#yiv3065753650 div.yiv3065753650attach-table {width:400px;}#yiv3065753650 div.yiv3065753650file-title a, #yiv3065753650 div.yiv3065753650file-title a:active, #yiv3065753650 div.yiv3065753650file-title a:hover, #yiv3065753650 div.yiv3065753650file-title a:visited {text-decoration:none;}#yiv3065753650 div.yiv3065753650photo-title a, #yiv3065753650 div.yiv3065753650photo-title a:active, #yiv3065753650 div.yiv3065753650photo-title a:hover, #yiv3065753650 div.yiv3065753650photo-title a:visited {text-decoration:none;}#yiv3065753650 div#yiv3065753650ygrp-mlmsg #yiv3065753650ygrp-msg p a span.yiv3065753650yshortcuts {font-family:Verdana;font-size:10px;font-weight:normal;}#yiv3065753650 .yiv3065753650green {color:#628c2a;}#yiv3065753650 .yiv3065753650MsoNormal {margin:0 0 0 0;}#yiv3065753650 o {font-size:0;}#yiv3065753650 #yiv3065753650photos div {float:left;width:72px;}#yiv3065753650 #yiv3065753650photos div div {border:1px solid #666666;min-height:62px;overflow:hidden;width:62px;}#yiv3065753650 #yiv3065753650photos div label {color:#666666;font-size:10px;overflow:hidden;text-align:center;white-space:nowrap;width:64px;}#yiv3065753650 #yiv3065753650reco-category {font-size:77%;}#yiv3065753650 #yiv3065753650reco-desc {font-size:77%;}#yiv3065753650 .yiv3065753650replbq {margin:4px;}#yiv3065753650 #yiv3065753650ygrp-actbar div a:first-child {margin-right:2px;padding-right:5px;}#yiv3065753650 #yiv3065753650ygrp-mlmsg {font-size:13px;font-family:Arial, helvetica, clean, sans-serif;}#yiv3065753650 #yiv3065753650ygrp-mlmsg table {font-size:inherit;font:100%;}#yiv3065753650 #yiv3065753650ygrp-mlmsg select, #yiv3065753650 input, #yiv3065753650 textarea {font:99% Arial, Helvetica, clean, sans-serif;}#yiv3065753650 #yiv3065753650ygrp-mlmsg pre, #yiv3065753650 code {font:115% monospace;}#yiv3065753650 #yiv3065753650ygrp-mlmsg * {line-height:1.22em;}#yiv3065753650 #yiv3065753650ygrp-mlmsg #yiv3065753650logo {padding-bottom:10px;}#yiv3065753650 #yiv3065753650ygrp-msg p a {font-family:Verdana;}#yiv3065753650 #yiv3065753650ygrp-msg p#yiv3065753650attach-count span {color:#1E66AE;font-weight:700;}#yiv3065753650 #yiv3065753650ygrp-reco #yiv3065753650reco-head {color:#ff7900;font-weight:700;}#yiv3065753650 #yiv3065753650ygrp-reco {margin-bottom:20px;padding:0px;}#yiv3065753650 #yiv3065753650ygrp-sponsor #yiv3065753650ov li a {font-size:130%;text-decoration:none;}#yiv3065753650 #yiv3065753650ygrp-sponsor #yiv3065753650ov li {font-size:77%;list-style-type:square;padding:6px 0;}#yiv3065753650 #yiv3065753650ygrp-sponsor #yiv3065753650ov ul {margin:0;padding:0 0 0 8px;}#yiv3065753650 #yiv3065753650ygrp-text {font-family:Georgia;}#yiv3065753650 #yiv3065753650ygrp-text p {margin:0 0 1em 0;}#yiv3065753650 #yiv3065753650ygrp-text tt {font-size:120%;}#yiv3065753650 #yiv3065753650ygrp-vital ul li:last-child {border-right:none !important;}#yiv3065753650

Hi Warren, Jonathan,

Chapter 32 of Patrick Kelly's book in pdf format: http://www.free-energy-info.com/SChapter32.pdf http://www.free-energy-info.com/SChapter32.pdf
Same in html format: http://www.free-energy-info.com/SChapt32.html http://www.free-energy-info.com/SChapt32.html

I see Gerad Morin is on this project. If he does the measurements don't expect them to be true. He has several videos on YouTube where he shows that he knows very little about proper measurements. First he should know the limits of the instruments he is using before making claims. If he is going to make AC measurements it almost certainly will go wrong unless he has learned to do it the right way.

Regards
Ole
 

---In [email protected], <schoonersolsticemoon@...> wrote :

 Jonathan Check with Patrick Kelly.
 He is about to publish a revised version of his chapter 32 based on the latest circuit details, as developed by a group of people working on this device.
 It is not an exotic circuit. An Arduino Uno is used to direct everything, and Patrick provides the code, plus a downloadable version in his Ebook, which is free on line.
 The 400 volt dc supply is simply turned on, and off, using the Arduino which senses the position of rotation, and applies the sharp spikes at a very precise point, to the coils, in sequence. No hall effects are used, or needed.
 The 400 volt supply can be produced any number of ways, and even made adjustable. 
 So far, there are at least six people with units on the go and no smoke, so far.
I just printed the schematic from Patrick's site, so I'd have to scan it.
 There are quite a few pages with a complete detailed instruction for everything, well laid out, with photos and drawings, so even beginners might be able to build one. There is a person in Sweden, who is arranging a kit of machined parts to be sold, at cost, and organizing a buying consortium for a group purchase of stuff.
 The group is dedicated to making it all public, and distributing everything, in as low a cost as possible, much in the way the Arduino came to be.
 Myself, I am all together mechanically, with my motor generator, have my Arduino Uno, and the old circuit, but need to change parts of it with the new modifications, before I test it out.
 Several components are still to be delivered by mail, but those chips are now being changed, for an upgraded version that is
 Sent from Yahoo Mail on Android https://go.onelink.me/107872968?pid=InProduct&c=Global_Internal_YGrowth_AndroidEmailSig__AndroidUsers&af_wl=ym&af_sub1=Internal&af_sub2=Global_YGrowth&af_sub3=EmailSignature
 
 On Wed., 1 May 2019 at 11:36 p.m., Jonathan Rivera einspace2005@... [EVGRAY]
 <[email protected]> wrote:

   
 Hi Warren, 

 Do you know the circuit for generating the radio frequencies at 400V 3ph? Thanks.

Well its good so many are all in on this should provide much operational
data and truth of performance .what's going to be needed is a unit that is
slightly  less effective but much less involved in computer .usage and the
use of more off the shelf parts .would be nice . I'm getting to the Pou t
in my life were I see persumtion as a impediment to progress ive assumed
and stopped when nothing was really wrong just a persumtion that jammed
things up go to the end then you have a conclusion not a persumtion .

On Thursday, May 2, 2019, [email protected] [EVGRAY] <
[email protected]> wrote:

>
>
> Hi Warren, Jonathan,
>
> Chapter 32 of Patrick Kelly's book in pdf format:
> http://www.free-energy-info.com/SChapter32.pdf
> Same in html format: http://www.free-energy-info.com/SChapt32.html
>
> I see Gerad Morin is on this project. If he does the measurements don't
> expect them to be true. He has several videos on YouTube where he shows
> that he knows very little about proper measurements. First he should know
> the limits of the instruments he is using before making claims. If he is
> going to make AC measurements it almost certainly will go wrong unless he
> has learned to do it the right way.
>
> Regards
> Ole
>
>
> ---In [email protected], <schoonersolsticemoon@...> wrote :
>
> Jonathan
> Check with Patrick Kelly.
> He is about to publish a revised version of his chapter 32 based on the
> latest circuit details, as developed by a group of people working on this
> device.
> It is not an exotic circuit. An Arduino Uno is used to direct everything,
> and Patrick provides the code, plus a downloadable version in his Ebook,
> which is free on line.
> The 400 volt dc supply is simply turned on, and off, using the Arduino
> which senses the position of rotation, and applies the sharp spikes at a
> very precise point, to the coils, in sequence. No hall effects are used, or
> needed.
> The 400 volt supply can be produced any number of ways, and even made
> adjustable.
> So far, there are at least six people with units on the go and no smoke,
> so far.
> I just printed the schematic from Patrick's site, so I'd have to scan it.
> There are quite a few pages with a complete detailed instruction for
> everything, well laid out, with photos and drawings, so even beginners
> might be able to build one. There is a person in Sweden, who is arranging a
> kit of machined parts to be sold, at cost, and organizing a buying
> consortium for a group purchase of stuff.
> The group is dedicated to making it all public, and distributing
> everything, in as low a cost as possible, much in the way the Arduino came
> to be.
> Myself, I am all together mechanically, with my motor generator, have my
> Arduino Uno, and the old circuit, but need to change parts of it with the
> new modifications, before I test it out.
> Several components are still to be delivered by mail, but those chips are
> now being changed, for an upgraded version that is
> Sent from Yahoo Mail on Android
> <https://go.onelink.me/107872968?pid=InProduct&c=Global_Internal_YGrowth_AndroidEmailSig__AndroidUsers&af_wl=ym&af_sub1=Internal&af_sub2=Global_YGrowth&af_sub3=EmailSignature>
>
> On Wed., 1 May 2019 at 11:36 p.m., Jonathan Rivera einspace2005@...
> [EVGRAY]
> <[email protected]> wrote:
>
>
> Hi Warren,
>
> Do you know the circuit for generating the radio frequencies at 400V 3ph?
> Thanks.
>
> 
>

OleThank you for your observations.We should, even though not scientists, try to follow proper scientific experimental routine, whenever possible.We also need tangible evidence, first hand, whenever possible.This is especially true where time and money are being spent from our limited supplies of resources, to do research.I am capable in the mechanical arrangements, but not brilliant with software. Fortunately, I think I understand what it is attempting to do. The controller electronics are simply there to act as valves for the 400 volt DC supply to the coils. The main trick is to have sharp on, and off, spikes at the precise moment in time, in sequence.
There are a number of frauds, and swindlers, always shadowing any real free energy device, and in the absence of any, they make stuff up.The Internet is just full of them, as you know.How do we know the difference between fake and real? We can only use our best personal judgement, and make a replication of the promising devices, trying them ourselves, to see what they really are.The Samsung has only cost me a motor on ebay(used) , as I already have the generator headThe Arduino and components are pretty cheap, so this whole experiment is fairly low risk for me.However, I decided to take delivery of 20 KW of Canadian made photoelectric panels to put on my barn roof, which just happens to be the best angle, and faces south.I did not plan for them, but they were at scrap prices, used, and only 3 years oldKeep up your sharp thoughts, and good work.Cheers WarrenSent from Yahoo Mail on Android 
 
  On Thu., 2 May 2019 at 8:17 a.m., [email protected] [EVGRAY]<[email protected]> wrote:       
Hi Warren, Jonathan,

Chapter 32 of Patrick Kelly's book in pdf format: http://www.free-energy-info.com/SChapter32.pdf
Same in html format: http://www.free-energy-info.com/SChapt32.html

I see Gerad Morin is on this project. If he does the measurements don't expect them to be true. He has several videos on YouTube where he shows that he knows very little about proper measurements. First he should know the limits of the instruments he is using before making claims. If he is going to make AC measurements it almost certainly will go wrong unless he has learned to do it the right way.

Regards
Ole



---In [email protected], <schoonersolsticemoon@...> wrote :

JonathanCheck with Patrick Kelly.He is about to publish a revised version of his chapter 32 based on the latest circuit details, as developed by a group of people working on this device.It is not an exotic circuit. An Arduino Uno is used to direct everything, and Patrick provides the code, plus a downloadable version in his Ebook, which is free on line.The 400 volt dc supply is simply turned on, and off, using the Arduino which senses the position of rotation, and applies the sharp spikes at a very precise point, to the coils, in sequence. No hall effects are used, or needed.The 400 volt supply can be produced any number of ways, and even made adjustable. So far, there are at least six people with units on the go and no smoke, so far.
I just printed the schematic from Patrick's site, so I'd have to scan it.There are quite a few pages with a complete detailed instruction for everything, well laid out, with photos and drawings, so even beginners might be able to build one. There is a person in Sweden, who is arranging a kit of machined parts to be sold, at cost, and organizing a buying consortium for a group purchase of stuff.The group is dedicated to making it all public, and distributing everything, in as low a cost as possible, much in the way the Arduino came to be.Myself, I am all together mechanically, with my motor generator, have my Arduino Uno, and the old circuit, but need to change parts of it with the new modifications, before I test it out.Several components are still to be delivered by mail, but those chips are now being changed, for an upgraded version that is
Sent from Yahoo Mail on Android 


On Wed., 1 May 2019 at 11:36 p.m., Jonathan Rivera einspace2005@... [EVGRAY]<[email protected]> wrote: 

Hi Warren,
Do you know the circuit for generating the radio frequencies at 400V 3ph? Thanks.

  #yiv4681303859 -- #yiv4681303859ygrp-mkp {border:1px solid #d8d8d8;font-family:Arial;margin:10px 0;padding:0 10px;}#yiv4681303859 #yiv4681303859ygrp-mkp hr {border:1px solid #d8d8d8;}#yiv4681303859 #yiv4681303859ygrp-mkp #yiv4681303859hd {color:#628c2a;font-size:85%;font-weight:700;line-height:122%;margin:10px 0;}#yiv4681303859 #yiv4681303859ygrp-mkp #yiv4681303859ads {margin-bottom:10px;}#yiv4681303859 #yiv4681303859ygrp-mkp .yiv4681303859ad {padding:0 0;}#yiv4681303859 #yiv4681303859ygrp-mkp .yiv4681303859ad p {margin:0;}#yiv4681303859 #yiv4681303859ygrp-mkp .yiv4681303859ad a {color:#0000ff;text-decoration:none;}#yiv4681303859 #yiv4681303859ygrp-sponsor #yiv4681303859ygrp-lc {font-family:Arial;}#yiv4681303859 #yiv4681303859ygrp-sponsor #yiv4681303859ygrp-lc #yiv4681303859hd {margin:10px 0px;font-weight:700;font-size:78%;line-height:122%;}#yiv4681303859 #yiv4681303859ygrp-sponsor #yiv4681303859ygrp-lc .yiv4681303859ad {margin-bottom:10px;padding:0 0;}#yiv4681303859 #yiv4681303859actions {font-family:Verdana;font-size:11px;padding:10px 0;}#yiv4681303859 #yiv4681303859activity {background-color:#e0ecee;float:left;font-family:Verdana;font-size:10px;padding:10px;}#yiv4681303859 #yiv4681303859activity span {font-weight:700;}#yiv4681303859 #yiv4681303859activity span:first-child {text-transform:uppercase;}#yiv4681303859 #yiv4681303859activity span a {color:#5085b6;text-decoration:none;}#yiv4681303859 #yiv4681303859activity span span {color:#ff7900;}#yiv4681303859 #yiv4681303859activity span .yiv4681303859underline {text-decoration:underline;}#yiv4681303859 .yiv4681303859attach {clear:both;display:table;font-family:Arial;font-size:12px;padding:10px 0;width:400px;}#yiv4681303859 .yiv4681303859attach div a {text-decoration:none;}#yiv4681303859 .yiv4681303859attach img {border:none;padding-right:5px;}#yiv4681303859 .yiv4681303859attach label {display:block;margin-bottom:5px;}#yiv4681303859 .yiv4681303859attach label a {text-decoration:none;}#yiv4681303859 blockquote {margin:0 0 0 4px;}#yiv4681303859 .yiv4681303859bold {font-family:Arial;font-size:13px;font-weight:700;}#yiv4681303859 .yiv4681303859bold a {text-decoration:none;}#yiv4681303859 dd.yiv4681303859last p a {font-family:Verdana;font-weight:700;}#yiv4681303859 dd.yiv4681303859last p span {margin-right:10px;font-family:Verdana;font-weight:700;}#yiv4681303859 dd.yiv4681303859last p span.yiv4681303859yshortcuts {margin-right:0;}#yiv4681303859 div.yiv4681303859attach-table div div a {text-decoration:none;}#yiv4681303859 div.yiv4681303859attach-table {width:400px;}#yiv4681303859 div.yiv4681303859file-title a, #yiv4681303859 div.yiv4681303859file-title a:active, #yiv4681303859 div.yiv4681303859file-title a:hover, #yiv4681303859 div.yiv4681303859file-title a:visited {text-decoration:none;}#yiv4681303859 div.yiv4681303859photo-title a, #yiv4681303859 div.yiv4681303859photo-title a:active, #yiv4681303859 div.yiv4681303859photo-title a:hover, #yiv4681303859 div.yiv4681303859photo-title a:visited {text-decoration:none;}#yiv4681303859 div#yiv4681303859ygrp-mlmsg #yiv4681303859ygrp-msg p a span.yiv4681303859yshortcuts {font-family:Verdana;font-size:10px;font-weight:normal;}#yiv4681303859 .yiv4681303859green {color:#628c2a;}#yiv4681303859 .yiv4681303859MsoNormal {margin:0 0 0 0;}#yiv4681303859 o {font-size:0;}#yiv4681303859 #yiv4681303859photos div {float:left;width:72px;}#yiv4681303859 #yiv4681303859photos div div {border:1px solid #666666;min-height:62px;overflow:hidden;width:62px;}#yiv4681303859 #yiv4681303859photos div label {color:#666666;font-size:10px;overflow:hidden;text-align:center;white-space:nowrap;width:64px;}#yiv4681303859 #yiv4681303859reco-category {font-size:77%;}#yiv4681303859 #yiv4681303859reco-desc {font-size:77%;}#yiv4681303859 .yiv4681303859replbq {margin:4px;}#yiv4681303859 #yiv4681303859ygrp-actbar div a:first-child {margin-right:2px;padding-right:5px;}#yiv4681303859 #yiv4681303859ygrp-mlmsg {font-size:13px;font-family:Arial, helvetica, clean, sans-serif;}#yiv4681303859 #yiv4681303859ygrp-mlmsg table {font-size:inherit;font:100%;}#yiv4681303859 #yiv4681303859ygrp-mlmsg select, #yiv4681303859 input, #yiv4681303859 textarea {font:99% Arial, Helvetica, clean, sans-serif;}#yiv4681303859 #yiv4681303859ygrp-mlmsg pre, #yiv4681303859 code {font:115% monospace;}#yiv4681303859 #yiv4681303859ygrp-mlmsg * {line-height:1.22em;}#yiv4681303859 #yiv4681303859ygrp-mlmsg #yiv4681303859logo {padding-bottom:10px;}#yiv4681303859 #yiv4681303859ygrp-msg p a {font-family:Verdana;}#yiv4681303859 #yiv4681303859ygrp-msg p#yiv4681303859attach-count span {color:#1E66AE;font-weight:700;}#yiv4681303859 #yiv4681303859ygrp-reco #yiv4681303859reco-head {color:#ff7900;font-weight:700;}#yiv4681303859 #yiv4681303859ygrp-reco {margin-bottom:20px;padding:0px;}#yiv4681303859 #yiv4681303859ygrp-sponsor #yiv4681303859ov li a {font-size:130%;text-decoration:none;}#yiv4681303859 #yiv4681303859ygrp-sponsor #yiv4681303859ov li {font-size:77%;list-style-type:square;padding:6px 0;}#yiv4681303859 #yiv4681303859ygrp-sponsor #yiv4681303859ov ul {margin:0;padding:0 0 0 8px;}#yiv4681303859 #yiv4681303859ygrp-text {font-family:Georgia;}#yiv4681303859 #yiv4681303859ygrp-text p {margin:0 0 1em 0;}#yiv4681303859 #yiv4681303859ygrp-text tt {font-size:120%;}#yiv4681303859 #yiv4681303859ygrp-vital ul li:last-child {border-right:none !important;}#yiv4681303859

Spike pulses can be made from a 555 chip with clipping diodes I made a set
for the HHO project I was working on .now that as a source with power
MOSFETs and light triggered switching might get there .

On Thursday, May 2, 2019, Warren Keillor [email protected]
[EVGRAY] <[email protected]> wrote:

>
>
> Ole
> Thank you for your observations.
> We should, even though not scientists, try to follow proper scientific
> experimental routine, whenever possible.
> We also need tangible evidence, first hand, whenever possible.
> This is especially true where time and money are being spent from our
> limited supplies of resources, to do research.
> I am capable in the mechanical arrangements, but not brilliant with
> software. Fortunately, I think I understand what it is attempting to do.
> The controller electronics are simply there to act as valves for the 400
> volt DC supply to the coils. The main trick is to have sharp on, and off,
> spikes at the precise moment in time, in sequence.
> There are a number of frauds, and swindlers, always shadowing any real
> free energy device, and in the absence of any, they make stuff up.
> The Internet is just full of them, as you know.
> How do we know the difference between fake and real? We can only use our
> best personal judgement, and make a replication of the promising devices,
> trying them ourselves, to see what they really are.
> The Samsung has only cost me a motor on ebay(used) , as I already have the
> generator head
> The Arduino and components are pretty cheap, so this whole experiment is
> fairly low risk for me.
> However, I decided to take delivery of 20 KW of Canadian made
> photoelectric panels to put on my barn roof, which just happens to be the
> best angle, and faces south.
> I did not plan for them, but they were at scrap prices, used, and only 3
> years old
> Keep up your sharp thoughts, and good work.
> Cheers Warren
> Sent from Yahoo Mail on Android
> <https://go.onelink.me/107872968?pid=InProduct&c=Global_Internal_YGrowth_AndroidEmailSig__AndroidUsers&af_wl=ym&af_sub1=Internal&af_sub2=Global_YGrowth&af_sub3=EmailSignature>
>
> On Thu., 2 May 2019 at 8:17 a.m., [email protected] [EVGRAY]
> <[email protected]> wrote:
>
>
> Hi Warren, Jonathan,
>
> Chapter 32 of Patrick Kelly's book in pdf format:
> http://www.free-energy-info.com/SChapter32.pdf
> Same in html format: http://www.free-energy-info.com/SChapt32.html
>
> I see Gerad Morin is on this project. If he does the measurements don't
> expect them to be true. He has several videos on YouTube where he shows
> that he knows very little about proper measurements. First he should know
> the limits of the instruments he is using before making claims. If he is
> going to make AC measurements it almost certainly will go wrong unless he
> has learned to do it the right way.
>
> Regards
> Ole
>
>
> ---In [email protected], <schoonersolsticemoon@...> wrote :
>
> Jonathan
> Check with Patrick Kelly.
> He is about to publish a revised version of his chapter 32 based on the
> latest circuit details, as developed by a group of people working on this
> device.
> It is not an exotic circuit. An Arduino Uno is used to direct everything,
> and Patrick provides the code, plus a downloadable version in his Ebook,
> which is free on line.
> The 400 volt dc supply is simply turned on, and off, using the Arduino
> which senses the position of rotation, and applies the sharp spikes at a
> very precise point, to the coils, in sequence. No hall effects are used, or
> needed.
> The 400 volt supply can be produced any number of ways, and even made
> adjustable.
> So far, there are at least six people with units on the go and no smoke,
> so far.
> I just printed the schematic from Patrick's site, so I'd have to scan it.
> There are quite a few pages with a complete detailed instruction for
> everything, well laid out, with photos and drawings, so even beginners
> might be able to build one. There is a person in Sweden, who is arranging a
> kit of machined parts to be sold, at cost, and organizing a buying
> consortium for a group purchase of stuff.
> The group is dedicated to making it all public, and distributing
> everything, in as low a cost as possible, much in the way the Arduino came
> to be.
> Myself, I am all together mechanically, with my motor generator, have my
> Arduino Uno, and the old circuit, but need to change parts of it with the
> new modifications, before I test it out.
> Several components are still to be delivered by mail, but those chips are
> now being changed, for an upgraded version that is
> Sent from Yahoo Mail on Android
> <https://go.onelink.me/107872968?pid=InProduct&c=Global_Internal_YGrowth_AndroidEmailSig__AndroidUsers&af_wl=ym&af_sub1=Internal&af_sub2=Global_YGrowth&af_sub3=EmailSignature>
>
> On Wed., 1 May 2019 at 11:36 p.m., Jonathan Rivera einspace2005@...
> [EVGRAY]
> <[email protected]> wrote:
>
>
> Hi Warren,
>
> Do you know the circuit for generating the radio frequencies at 400V 3ph?
> Thanks.
>
> 
>

Warren if you get a matching unit for your panels and feed it back into the
power lines you can use your power lines like a battery and start paying
for them selves .

On Thursday, May 2, 2019, James Glinski <[email protected]> wrote:

> Spike pulses can be made from a 555 chip with clipping diodes I made a set
> for the HHO project I was working on .now that as a source with power
> MOSFETs and light triggered switching might get there .
>
> On Thursday, May 2, 2019, Warren Keillor [email protected]
> [EVGRAY] <[email protected]> wrote:
>
>>
>>
>> Ole
>> Thank you for your observations.
>> We should, even though not scientists, try to follow proper scientific
>> experimental routine, whenever possible.
>> We also need tangible evidence, first hand, whenever possible.
>> This is especially true where time and money are being spent from our
>> limited supplies of resources, to do research.
>> I am capable in the mechanical arrangements, but not brilliant with
>> software. Fortunately, I think I understand what it is attempting to do.
>> The controller electronics are simply there to act as valves for the 400
>> volt DC supply to the coils. The main trick is to have sharp on, and off,
>> spikes at the precise moment in time, in sequence.
>> There are a number of frauds, and swindlers, always shadowing any real
>> free energy device, and in the absence of any, they make stuff up.
>> The Internet is just full of them, as you know.
>> How do we know the difference between fake and real? We can only use our
>> best personal judgement, and make a replication of the promising devices,
>> trying them ourselves, to see what they really are.
>> The Samsung has only cost me a motor on ebay(used) , as I already have
>> the generator head
>> The Arduino and components are pretty cheap, so this whole experiment is
>> fairly low risk for me.
>> However, I decided to take delivery of 20 KW of Canadian made
>> photoelectric panels to put on my barn roof, which just happens to be the
>> best angle, and faces south.
>> I did not plan for them, but they were at scrap prices, used, and only 3
>> years old
>> Keep up your sharp thoughts, and good work.
>> Cheers Warren
>> Sent from Yahoo Mail on Android
>> <https://go.onelink.me/107872968?pid=InProduct&c=Global_Internal_YGrowth_AndroidEmailSig__AndroidUsers&af_wl=ym&af_sub1=Internal&af_sub2=Global_YGrowth&af_sub3=EmailSignature>
>>
>> On Thu., 2 May 2019 at 8:17 a.m., [email protected] [EVGRAY]
>> <[email protected]> wrote:
>>
>>
>> Hi Warren, Jonathan,
>>
>> Chapter 32 of Patrick Kelly's book in pdf format:
>> http://www.free-energy-info.com/SChapter32.pdf
>> Same in html format: http://www.free-energy-info.com/SChapt32.html
>>
>> I see Gerad Morin is on this project. If he does the measurements don't
>> expect them to be true. He has several videos on YouTube where he shows
>> that he knows very little about proper measurements. First he should know
>> the limits of the instruments he is using before making claims. If he is
>> going to make AC measurements it almost certainly will go wrong unless he
>> has learned to do it the right way.
>>
>> Regards
>> Ole
>>
>>
>> ---In [email protected], <schoonersolsticemoon@...> wrote :
>>
>> Jonathan
>> Check with Patrick Kelly.
>> He is about to publish a revised version of his chapter 32 based on the
>> latest circuit details, as developed by a group of people working on this
>> device.
>> It is not an exotic circuit. An Arduino Uno is used to direct everything,
>> and Patrick provides the code, plus a downloadable version in his Ebook,
>> which is free on line.
>> The 400 volt dc supply is simply turned on, and off, using the Arduino
>> which senses the position of rotation, and applies the sharp spikes at a
>> very precise point, to the coils, in sequence. No hall effects are used, or
>> needed.
>> The 400 volt supply can be produced any number of ways, and even made
>> adjustable.
>> So far, there are at least six people with units on the go and no smoke,
>> so far.
>> I just printed the schematic from Patrick's site, so I'd have to scan it.
>> There are quite a few pages with a complete detailed instruction for
>> everything, well laid out, with photos and drawings, so even beginners
>> might be able to build one. There is a person in Sweden, who is arranging a
>> kit of machined parts to be sold, at cost, and organizing a buying
>> consortium for a group purchase of stuff.
>> The group is dedicated to making it all public, and distributing
>> everything, in as low a cost as possible, much in the way the Arduino came
>> to be.
>> Myself, I am all together mechanically, with my motor generator, have my
>> Arduino Uno, and the old circuit, but need to change parts of it with the
>> new modifications, before I test it out.
>> Several components are still to be delivered by mail, but those chips are
>> now being changed, for an upgraded version that is
>> Sent from Yahoo Mail on Android
>> <https://go.onelink.me/107872968?pid=InProduct&c=Global_Internal_YGrowth_AndroidEmailSig__AndroidUsers&af_wl=ym&af_sub1=Internal&af_sub2=Global_YGrowth&af_sub3=EmailSignature>
>>
>> On Wed., 1 May 2019 at 11:36 p.m., Jonathan Rivera einspace2005@...
>> [EVGRAY]
>> <[email protected]> wrote:
>>
>>
>> Hi Warren,
>>
>> Do you know the circuit for generating the radio frequencies at 400V 3ph?
>> Thanks.
>>
>> 
>>
>