Re: [EVGRAY] Washer motor

Body

Spike pulses can be made from a 555 chip with clipping diodes I made a set
for the HHO project I was working on .now that as a source with power
MOSFETs and light triggered switching might get there .

On Thursday, May 2, 2019, Warren Keillor [email protected]
[EVGRAY] <[email protected]> wrote:

>
>
> Ole
> Thank you for your observations.
> We should, even though not scientists, try to follow proper scientific
> experimental routine, whenever possible.
> We also need tangible evidence, first hand, whenever possible.
> This is especially true where time and money are being spent from our
> limited supplies of resources, to do research.
> I am capable in the mechanical arrangements, but not brilliant with
> software. Fortunately, I think I understand what it is attempting to do.
> The controller electronics are simply there to act as valves for the 400
> volt DC supply to the coils. The main trick is to have sharp on, and off,
> spikes at the precise moment in time, in sequence.
> There are a number of frauds, and swindlers, always shadowing any real
> free energy device, and in the absence of any, they make stuff up.
> The Internet is just full of them, as you know.
> How do we know the difference between fake and real? We can only use our
> best personal judgement, and make a replication of the promising devices,
> trying them ourselves, to see what they really are.
> The Samsung has only cost me a motor on ebay(used) , as I already have the
> generator head
> The Arduino and components are pretty cheap, so this whole experiment is
> fairly low risk for me.
> However, I decided to take delivery of 20 KW of Canadian made
> photoelectric panels to put on my barn roof, which just happens to be the
> best angle, and faces south.
> I did not plan for them, but they were at scrap prices, used, and only 3
> years old
> Keep up your sharp thoughts, and good work.
> Cheers Warren
> Sent from Yahoo Mail on Android
> <https://go.onelink.me/107872968?pid=InProduct&c=Global_Internal_YGrowth_AndroidEmailSig__AndroidUsers&af_wl=ym&af_sub1=Internal&af_sub2=Global_YGrowth&af_sub3=EmailSignature>
>
> On Thu., 2 May 2019 at 8:17 a.m., [email protected] [EVGRAY]
> <[email protected]> wrote:
>
>
> Hi Warren, Jonathan,
>
> Chapter 32 of Patrick Kelly's book in pdf format:
> http://www.free-energy-info.com/SChapter32.pdf
> Same in html format: http://www.free-energy-info.com/SChapt32.html
>
> I see Gerad Morin is on this project. If he does the measurements don't
> expect them to be true. He has several videos on YouTube where he shows
> that he knows very little about proper measurements. First he should know
> the limits of the instruments he is using before making claims. If he is
> going to make AC measurements it almost certainly will go wrong unless he
> has learned to do it the right way.
>
> Regards
> Ole
>
>
> ---In [email protected], <schoonersolsticemoon@...> wrote :
>
> Jonathan
> Check with Patrick Kelly.
> He is about to publish a revised version of his chapter 32 based on the
> latest circuit details, as developed by a group of people working on this
> device.
> It is not an exotic circuit. An Arduino Uno is used to direct everything,
> and Patrick provides the code, plus a downloadable version in his Ebook,
> which is free on line.
> The 400 volt dc supply is simply turned on, and off, using the Arduino
> which senses the position of rotation, and applies the sharp spikes at a
> very precise point, to the coils, in sequence. No hall effects are used, or
> needed.
> The 400 volt supply can be produced any number of ways, and even made
> adjustable.
> So far, there are at least six people with units on the go and no smoke,
> so far.
> I just printed the schematic from Patrick's site, so I'd have to scan it.
> There are quite a few pages with a complete detailed instruction for
> everything, well laid out, with photos and drawings, so even beginners
> might be able to build one. There is a person in Sweden, who is arranging a
> kit of machined parts to be sold, at cost, and organizing a buying
> consortium for a group purchase of stuff.
> The group is dedicated to making it all public, and distributing
> everything, in as low a cost as possible, much in the way the Arduino came
> to be.
> Myself, I am all together mechanically, with my motor generator, have my
> Arduino Uno, and the old circuit, but need to change parts of it with the
> new modifications, before I test it out.
> Several components are still to be delivered by mail, but those chips are
> now being changed, for an upgraded version that is
> Sent from Yahoo Mail on Android
> <https://go.onelink.me/107872968?pid=InProduct&c=Global_Internal_YGrowth_AndroidEmailSig__AndroidUsers&af_wl=ym&af_sub1=Internal&af_sub2=Global_YGrowth&af_sub3=EmailSignature>
>
> On Wed., 1 May 2019 at 11:36 p.m., Jonathan Rivera einspace2005@...
> [EVGRAY]
> <[email protected]> wrote:
>
>
> Hi Warren,
>
> Do you know the circuit for generating the radio frequencies at 400V 3ph?
> Thanks.
>
> 
>