Re: [EVGRAY] Washer motor

Body

Warren if you get a matching unit for your panels and feed it back into the
power lines you can use your power lines like a battery and start paying
for them selves .

On Thursday, May 2, 2019, James Glinski <[email protected]> wrote:

> Spike pulses can be made from a 555 chip with clipping diodes I made a set
> for the HHO project I was working on .now that as a source with power
> MOSFETs and light triggered switching might get there .
>
> On Thursday, May 2, 2019, Warren Keillor [email protected]
> [EVGRAY] <[email protected]> wrote:
>
>>
>>
>> Ole
>> Thank you for your observations.
>> We should, even though not scientists, try to follow proper scientific
>> experimental routine, whenever possible.
>> We also need tangible evidence, first hand, whenever possible.
>> This is especially true where time and money are being spent from our
>> limited supplies of resources, to do research.
>> I am capable in the mechanical arrangements, but not brilliant with
>> software. Fortunately, I think I understand what it is attempting to do.
>> The controller electronics are simply there to act as valves for the 400
>> volt DC supply to the coils. The main trick is to have sharp on, and off,
>> spikes at the precise moment in time, in sequence.
>> There are a number of frauds, and swindlers, always shadowing any real
>> free energy device, and in the absence of any, they make stuff up.
>> The Internet is just full of them, as you know.
>> How do we know the difference between fake and real? We can only use our
>> best personal judgement, and make a replication of the promising devices,
>> trying them ourselves, to see what they really are.
>> The Samsung has only cost me a motor on ebay(used) , as I already have
>> the generator head
>> The Arduino and components are pretty cheap, so this whole experiment is
>> fairly low risk for me.
>> However, I decided to take delivery of 20 KW of Canadian made
>> photoelectric panels to put on my barn roof, which just happens to be the
>> best angle, and faces south.
>> I did not plan for them, but they were at scrap prices, used, and only 3
>> years old
>> Keep up your sharp thoughts, and good work.
>> Cheers Warren
>> Sent from Yahoo Mail on Android
>> <https://go.onelink.me/107872968?pid=InProduct&c=Global_Internal_YGrowth_AndroidEmailSig__AndroidUsers&af_wl=ym&af_sub1=Internal&af_sub2=Global_YGrowth&af_sub3=EmailSignature>
>>
>> On Thu., 2 May 2019 at 8:17 a.m., [email protected] [EVGRAY]
>> <[email protected]> wrote:
>>
>>
>> Hi Warren, Jonathan,
>>
>> Chapter 32 of Patrick Kelly's book in pdf format:
>> http://www.free-energy-info.com/SChapter32.pdf
>> Same in html format: http://www.free-energy-info.com/SChapt32.html
>>
>> I see Gerad Morin is on this project. If he does the measurements don't
>> expect them to be true. He has several videos on YouTube where he shows
>> that he knows very little about proper measurements. First he should know
>> the limits of the instruments he is using before making claims. If he is
>> going to make AC measurements it almost certainly will go wrong unless he
>> has learned to do it the right way.
>>
>> Regards
>> Ole
>>
>>
>> ---In [email protected], <schoonersolsticemoon@...> wrote :
>>
>> Jonathan
>> Check with Patrick Kelly.
>> He is about to publish a revised version of his chapter 32 based on the
>> latest circuit details, as developed by a group of people working on this
>> device.
>> It is not an exotic circuit. An Arduino Uno is used to direct everything,
>> and Patrick provides the code, plus a downloadable version in his Ebook,
>> which is free on line.
>> The 400 volt dc supply is simply turned on, and off, using the Arduino
>> which senses the position of rotation, and applies the sharp spikes at a
>> very precise point, to the coils, in sequence. No hall effects are used, or
>> needed.
>> The 400 volt supply can be produced any number of ways, and even made
>> adjustable.
>> So far, there are at least six people with units on the go and no smoke,
>> so far.
>> I just printed the schematic from Patrick's site, so I'd have to scan it.
>> There are quite a few pages with a complete detailed instruction for
>> everything, well laid out, with photos and drawings, so even beginners
>> might be able to build one. There is a person in Sweden, who is arranging a
>> kit of machined parts to be sold, at cost, and organizing a buying
>> consortium for a group purchase of stuff.
>> The group is dedicated to making it all public, and distributing
>> everything, in as low a cost as possible, much in the way the Arduino came
>> to be.
>> Myself, I am all together mechanically, with my motor generator, have my
>> Arduino Uno, and the old circuit, but need to change parts of it with the
>> new modifications, before I test it out.
>> Several components are still to be delivered by mail, but those chips are
>> now being changed, for an upgraded version that is
>> Sent from Yahoo Mail on Android
>> <https://go.onelink.me/107872968?pid=InProduct&c=Global_Internal_YGrowth_AndroidEmailSig__AndroidUsers&af_wl=ym&af_sub1=Internal&af_sub2=Global_YGrowth&af_sub3=EmailSignature>
>>
>> On Wed., 1 May 2019 at 11:36 p.m., Jonathan Rivera einspace2005@...
>> [EVGRAY]
>> <[email protected]> wrote:
>>
>>
>> Hi Warren,
>>
>> Do you know the circuit for generating the radio frequencies at 400V 3ph?
>> Thanks.
>>
>> 
>>
>