$1000 a day USA electrician working in Puerto Rico

Hi Hector
 Here is the link you asked for a few weeks ago, and this slow-talking retired marine says his nephew makes 1000 bucks a day fixing the grid in PR....along with that a bunch of armed US military or contractor guys must be with him to protect him too so also I wonder what they make a day. 
 I originally reported 3K a day, so sorry about that -electrician makes only 1K which is probably what a mechanic shop would charge these days fixing cars so that not so unreasonable but when you add-on the military escorts, probably it gets up to expenses being about 5K maybe 10KI a day to operate....of course the main point is they are not hiring Puerto Ricans to work at that wage to fix their own grid, I am sure plus Puerto Ricans would not need military escort too or it would be lots cheaper....the money to rebuild does not go to Puerto Rico, except comes back to USA mainland and contractors....also I wonder what the contractor keeps on top of the expenses in his bid...."carpet bagging" is what it is going on
 Anyways skip ahead 12 minutes into video to hear about his nephew making the big money in PR.....
 https://www.youtube.com/watch?v=4lSqUVMWTKE https://www.youtube.com/watch?v=4lSqUVMWTKE

Kone,

Our politicos are so criminal it's not healthy to dwell on.  The last 
honest one was Kennedy for a short period only after he tripped on acid 
and looked into his soul.  Of course he was offed along with the artist 
chick who gave him the L.

Nothing has changed since they killed a US president and few Americans  
can give a shit, as too distracted by fantasy football.

When Hector was mentioning the mods on an AC Brush generator the other 
day in order to make a motor-generator energy device, one of the 
modalities he mentioned was a Kone motor.  How should I interpret 
modding a field coil brush gen head to Konemotor?

"with a VFD no caps  ,  just proper impedance & recovery ..
'or "Konemotor"  it !"


On 1/6/2018 12:37 PM, [email protected] [EVGRAY] wrote:
>
> Hi Hector
>
> Here is the link you asked for a few weeks ago, and this slow-talking 
> retired marine says his nephew makes 1000 bucks a day fixing the grid 
> in PR....along with that a bunch of armed US military or contractor 
> guys must be with him to protect him too so also I wonder what they 
> make a day.
>
> I originally reported 3K a day, so sorry about that -electrician makes 
> only 1K which is probably what a mechanic shop would charge these days 
> fixing cars so that not so unreasonable but when you add-on the 
> military escorts, probably it gets up to expenses being about 5K maybe 
> 10KI a day to operate....of course the main point is they are not 
> hiring Puerto Ricans to work at that wage to fix their own grid, I am 
> sure plus Puerto Ricans would not need military escort too or it would 
> be lots cheaper....the money to rebuild does not go to Puerto Rico, 
> except comes back to USA mainland and contractors....also I wonder 
> what the contractor keeps on top of the expenses in his bid...."carpet 
> bagging" is what it is going on
>
> Anyways skip ahead 12 minutes into video to hear about his nephew 
> making the big money in PR.....
>
> https://www.youtube.com/watch?v=4lSqUVMWTKE
>
>
>

Kone,

Thanks cool stuff will add to my stash.  I think I can picture most of 
it.  I love your re-guaging concept.   Anyhow sounds like a lot of fun 
to experiment with for a minimal layout.

What have you found to be the advantage of N-N over S-S?

Do you know why this unit might have four brushes, is one pair for the 
field coils and the other set the armature?


On 1/7/2018 1:45 PM, [email protected] [EVGRAY] wrote:
>
> Hi Mick
>
> Not exactly sure how to
> Konemotor" a field coil brushed generator but what "is" a konemotor is 
> a motor with rotating coils and cores fed by brushes, and these rotor 
> coils line up and are pulsed N-N against stationary stator coils for 
> the power....So maybe H is thinking you can make the rotor coils and 
> the field coils in the generator head you will be working with, be 
> pulsed N-N bucking to make it spin and/or this is when you could 
> extract power lenz-free in generator mode since no lenz during a 
> bucking coil event just for the moment the rotor and stator colls line 
> up face to face N to N.....
>
> Additionally the stator coils have "elongated" cores in them, and 
> pickup windings are wound back behind the stator coils, as now power 
> is pulled out of these pickup winds taking adviantage of the flux that 
> stretches out behind the stator coil when it is pulsed....so in 
> yourgen head modification, you could maybe have some of the windings 
> be pulsed, have the other winds be induced pickup winds that make 
> power from sharing the cores swith the pulsed motor windings...
>
> More things is I discovered I could add X4 power or so with a 
> "regauging" mjagnet mounted next to stator cores and coil, that react 
> not stator coils, but the rotor cores and coils.......this magnet not 
> only induces some power into the rotor coils, but also flips the 
> polarity of the just-energized N rotor core and coils to S so instead 
> of a N-N hurdle the rotor has to push itself through on approach to 
> stator coil that was also just energized N, now you will get a free 
> PULL of the rotor being S and the stators N....
>
> Of course there is all the backemf/recoil collapsing field energy to 
> recover into caps too...I think this is more than is  usual, since the 
> bucking coils corkscrew their colliding flux into one 
> another,,,,pushing backward like a compressed and released spring the 
> backemf recoil spike and I think also the actual back emf too....
>
> Anyways I would guess H means to wire rotor and stators bucking mode 
> and pulse NN, make sure you have good backemf/recoil recovery circuit 
> and fill caps as motor runs..Maybe split windings, 1/3 motor primary 
> remaining pickup induced generator winds...
>
> ciaoKone.
>
>

Hi Mick
 Not exactly sure how to 
Konemotor" a field coil brushed generator but what "is" a konemotor is a motor with rotating coils and cores fed by brushes, and these rotor coils line up and are pulsed N-N against stationary stator coils for the power....So maybe H is thinking you can make the rotor coils and the field coils in the generator head you will be working with, be pulsed N-N bucking to make it spin and/or this is when you could extract power lenz-free in generator mode since no lenz during a bucking coil event just for the moment the rotor and stator colls line up face to face N to N.....
 Additionally the stator coils have "elongated" cores in them, and pickup windings are wound back behind the stator coils, as now power is pulled out of these pickup winds taking adviantage of the flux that stretches out behind the stator coil when it is pulsed....so in yourgen head modification, you could maybe have some of the windings be pulsed, have the other winds be induced pickup winds that make power from sharing the cores swith the pulsed motor windings...
 More things is I discovered I could add X4 power or so with a "regauging" mjagnet mounted next to stator cores and coil, that react not stator coils, but the rotor cores and coils.......this magnet not only induces some power into the rotor coils, but also flips the polarity of the just-energized N rotor core and coils to S so instead of a N-N hurdle the rotor has to push itself through on approach to stator coil that was also just energized N, now you will get a free PULL of the rotor being S and the stators N....
 Of course there is all the backemf/recoil collapsing field energy to recover into caps too...I think this is more than is  usual, since the bucking coils corkscrew their colliding flux into one another,,,,pushing backward like a compressed and released spring the backemf recoil spike and I think also the actual back emf too....
 Anyways I would guess H means to wire rotor and stators bucking mode and pulse NN, make sure you have good backemf/recoil recovery circuit and fill caps as motor runs..Maybe split windings, 1/3 motor primary remaining pickup induced generator winds...
 ciaoKone.

Hi Mick
 Yes regauging the rotor to be S-N instead of N-N upon approaching firing position with bucking coil motor really is lots more power for free. also that regauguing magnet reacting to the rotor coil works as inducing current into the rotor in generator-mode too, so perhaps a no lenz generator can be built like this, with it being pulsed-out only during N-N  bucking coils instead of pulsed;-in as in motor-mode......... also regauging magnets can be mounted stationary on each side of the stator coils too, not just to one side,  for double the induced generator power to the rotor coils whipping past....Also the regauging magnets should be adjustable in the their positioning, as you want them closer to stator coils for higher frequencies/rpm, further away for lower freguencies/rpm as I think because the flip-time of polarity needs to be quick at higher frequencies, at lower frequencies because the movement of rotor past magnet is slower, you need more time to flip polarity of rotor coils/coresc ompletely. so they become S intstead of N....
 I don't think any room in you generator-mod  for regauging magnets, within the case at least.... however perhaps magnets mounted on case to give greater strength to the core magnetism would be a good experiment. to try with your generator....too much magnetism/magnets on case probably makes it harder to spin but there might be perfect strength to get lost more power from it....
 The 4 brushes you mention in your generator I will guess are to flip polarity of the output either converting AC generated  to DC "twice", or to convert DC in each phase into AC but don't know.....
 here is link  below to photos of  96V dctreadmill motor  that  is on a gokart with neomagnets stuck right on the case to give it about 3 to 4 times more power and speed compared to no magnets on case.....it raises amp draw however but makes the gokart much faster given same voltage input so not so many batteiresand extra wieght needed on gokart.
 https://sites.google.com/site/alternativeworldenergy/home/dc-motor-magnetically-enhanced https://sites.google.com/site/alternativeworldenergy/home/dc-motor-magnetically-enhanced
 ciaoKone