Body
Hi Mick
Not exactly sure how to
Konemotor" a field coil brushed generator but what "is" a konemotor is a motor with rotating coils and cores fed by brushes, and these rotor coils line up and are pulsed N-N against stationary stator coils for the power....So maybe H is thinking you can make the rotor coils and the field coils in the generator head you will be working with, be pulsed N-N bucking to make it spin and/or this is when you could extract power lenz-free in generator mode since no lenz during a bucking coil event just for the moment the rotor and stator colls line up face to face N to N.....
Additionally the stator coils have "elongated" cores in them, and pickup windings are wound back behind the stator coils, as now power is pulled out of these pickup winds taking adviantage of the flux that stretches out behind the stator coil when it is pulsed....so in yourgen head modification, you could maybe have some of the windings be pulsed, have the other winds be induced pickup winds that make power from sharing the cores swith the pulsed motor windings...
More things is I discovered I could add X4 power or so with a "regauging" mjagnet mounted next to stator cores and coil, that react not stator coils, but the rotor cores and coils.......this magnet not only induces some power into the rotor coils, but also flips the polarity of the just-energized N rotor core and coils to S so instead of a N-N hurdle the rotor has to push itself through on approach to stator coil that was also just energized N, now you will get a free PULL of the rotor being S and the stators N....
Of course there is all the backemf/recoil collapsing field energy to recover into caps too...I think this is more than is usual, since the bucking coils corkscrew their colliding flux into one another,,,,pushing backward like a compressed and released spring the backemf recoil spike and I think also the actual back emf too....
Anyways I would guess H means to wire rotor and stators bucking mode and pulse NN, make sure you have good backemf/recoil recovery circuit and fill caps as motor runs..Maybe split windings, 1/3 motor primary remaining pickup induced generator winds...
ciaoKone.