AW: Re: AW: [EVGRAY] Re: Strobe

Thank goodness, I have a couple of fast and highpower diodes as powerblock unfortunately slow for 50 hz applications. Maybe you can also switch diodes in parallel to get a low resistance. Greetings Sven
Von Samsung Mobile gesendet

-------- Ursprüngliche Nachricht --------
Von: "[email protected] [EVGRAY]" <[email protected]> 
Datum:20.03.2018  00:29  (GMT+01:00) 
An: [email protected] 
Betreff: Re: AW: [EVGRAY] Re: Strobe 

the resistance of the xenon tube is alike in a thyratron , that is why i call xenon tubes the poor mans thyratron ...

anyway you can use a lone scr but is more susceptible at destruction by EMP 


on the diode 1kv and as fast as i can get with the lowest internal resistance ...

(H) 



---In [email protected], <s.friedrich@...> wrote :



ok ok, we start again at the coilbanger. Of course, switching the rewind diode on and off is an option to see what happens. I always thought you can make any inductor deliver that energy. I still have the circuit. An indication at which inductance we have to look at high impedance ignites the xenon tube only weakly. What performance does the xenon tube have at least? What kind of diode would you use or which power class and if it has to be very fast? Greetings Sven

Von Samsung Mobile gesendet


-------- Ursprüngliche Nachricht --------
Von: "arkresearch@... [EVGRAY]" 
Datum:19.03.2018 21:29 (GMT+01:00) 
An: [email protected] 
Betreff: [EVGRAY] Re: Strobe 

 
Ok a series of experiment to do .....  

flash unit with a coil  , remove reverse diode  flash , put reverse diode flash 


predicted result  diode in will flash more faster more intense .

diode out will flash slower a bit less intense ....... 

that means you have recovered  collapse energy spike and return it to the 
capacitor .....

on Normans commentary i highlighted  he states clearly  capacitor must match specific coil requirements to deliver the right joule volt ampere to excite whatever OU coil you might want to use  and recover its potential within the return spike  as i have mention to go on an easy trail  a circuit to excite and a circuit to harvest following the proper logarithmic path  of excitation and gain curve ... yes i know  its dealing with advanced solid state stuff but i have no choice if you have to understand rotary dynamics of RV 
and other similar devices that PLAY on the same rules! 

in other words this is totally applicable to pulsemotors and making any brushed generator work as an EV Gray motor without having to suffer the 
Jinx curse EV gray devices ended with . 

pause ....

awaiting  feedback ..

(H)