Body
QEG,
I noticed the discussion a bit back was about the QEG.
Has anyone been using the 4x background field frequency with a build.
The QEG sets up a long wire antenna against the ground, and derives a 1332 khz energy field to do initial conditioning.
333000 x 4 = 1.332 Mhz
This comes from two sources I am aware of.
The unit ends up with a field bubble of "conditioned space" around it.
Now from my own calculations, the larger this field bubble is, the more power it should deliver from the background field into the motor.
Since the QEG developers went into the pay to play mode, I have not kept up with what they are doing, but I have never heard anymore about this.
I do know the QEG that was shown working, makes a lot of noise, which means it has a lot of vibration going on, and wherever there is vibration, the techniques of vibration fracturing can be used to manipulate the power levels. If you measure the wavelength of the vibration using SS calipers you can then begin to set up fracturing ratios to reduce the inertial resistance to acceleration and bring up field bubbles around the device.
My latest work is showing that it may be possible to convert vibration into electric field by using a 1/9 frequency fractal against the main power frequency.
The vibration is cancelled out, so the unit will run smoother, and the energy is delivered into the electric vector side of the quadrature field.
Experiment with the 100 watt light bulb set up, shows a 20 cm wave front around the device, running at 60 Hz 120 volts single phase.
These standing waves around the Variac extend to about 9 feet out in all directions as layers.
---------------------------------------------------------------------------------------------------------------------------
The fact that no one is talking about this, indicates to me that possibly, no one has actually duplicated it, as they do not understand the power of using vibration manipulations.
The power of any EM circuit lies in its ability to create a force of motion, and this motion lies at 90 degrees to the Magnetic and Electric vectors. The value of what Wilbert Smith gave us is that this field of motion, can be manipulated also.
I have spent many years working directly with this field, and it is not limited to EM circuits, but the same techniques should apply. Vibration is the only field I have been able to achieve self sustaining fields by manipulating.
I just made a new document to show a method to vibrate up a Stainless Steel can using the background field off a 333000 Hz derivative, It is based on an area value function. You can place it on the SS tube using a caliper, and then stick your hand inside it, to get a feel for the effect of conditioning space as a volume.
http://www.resonantfractals.org/Joe_Cell/Caliper_Injection.html http://www.resonantfractals.org/Joe_Cell/Caliper_Injection.html
I did this one because many people should be able to try out easily, and prove to them self, there are self sustaining forms of energy we can put up and take down, conditioning the space around a device instantly.
Dave L