Body
Hi Dave,
"Here is an experiment I did many years back, and was afraid to share it. This document is an attempt to understand the how and why it worked.
http://www.resonantfractals.org/V2EM/100watt.html http://www.resonantfractals.org/V2EM/100watt.html"
The light dimmer is hard switching on the current at some given voltage (positive and negative) of the mains sine voltage. This generates a lot of harmonics which is of high frequency (HF) if there is no filter to short out these frequencies. Also diodes give off HF when switching off depending on the type used. The slow mains frequency diodes generate lots of HF because of the slow reverse recovery of that kind of diodes. The diodes have a brief moment conducting in reverse before actually blocking the current. This is the reverse recovery time of diodes which is very noisy. Thus there are at least two sources of radio frequency generators at play.
I don't understand how an air cored autotransformer for mains frequency is possible. It must be very big or have extremely many turns of wire to have enough inductance for the low frequency of the grid.
I guess no measurements have been done with proper instruments like an oscilloscope or something else to detect HF of the circuit. The circuit reminds me of this self-running HF charger: https://oldoctober.com/en/fuelless_generator/ https://oldoctober.com/en/fuelless_generator/. This circuit uses the obsolete tunnel diodes as switches. They can generate even microwaves.
What is the Romex tuning stub?
Regards
Ole
---In [email protected], <libra_spirit@...> wrote :
Ole,
Thank you for that info, I had not seen that one before. Running the two rotating fields in opposing directions! The motors RPMs can be greatly accelerated.
Yes, when a power line arcs on a power pole it produces a 120 Hz signature, showing there are two places on the wave that have actual power, and the thing with vibration energy, it can not tell them apart so well. So it is possible to take the vibration from the positive side of the sine wave and feed it back to the negative side to reinforce it. It will not short out the field.
Here is an experiment I did many years back, and was afraid to share it.
This document is an attempt to understand the how and why it worked.
http://www.resonantfractals.org/V2EM/100watt.html http://www.resonantfractals.org/V2EM/100watt.html
Mad_Scientist
Glad to see you are still fighting the fine fight of the faith.
Denying that atoms exist is a lot like being a flat earther to me.
In the 50's mankind was blowing atoms up, and then developinig NMR and MRI medical machines.
Every hospital of any large size has these machines, to locate things inside th body and identify them based on the atomic sciences developed to date.
Even if you do not believe in atoms persay, the frequencies they operate at are not secret.
We can look up any atom and identify it from those frequencies.
The development of the NVR charts and the nuclear mass resonance formula, mean that even you can take a set of SS calipers and determine what atoms are inside a sample, if you are a sensitive like Joe.
Dave L