Re: [EVGRAY] I Discovered this 29 years ago ! and counting !

Body

Patrick Kelly showed two 240 inverters and a cap combo to reach 400
starting at 12 vdc the prices on the inverters are low due to need only
half of the total in put power needed a couple of ,400 watt units are cheap
.depends on what you need .good luck warren .what's up with kono he would
be on this stuff like a duck on a June bug . what are you guys not saying ?.

On Wednesday, May 22, 2019, Warren Keillor [email protected]
[EVGRAY] <[email protected]> wrote:

>
>
> James
> Not yet, mechanically good to go, but must finish controller interface
> with the Arduino.
> I have a 24 volt to 240 volt inverter and a transformer that is 120 to 63
> volts that I aim to run in reverse. Should that smoke, I have a big multi
> tap torroid of 17 amps good to 550 volts. I can throw in a big 30 amp
> Variac to adjust voltage too
> In short I am not sure what I am going to do regarding supplying a
> variable up to 400 volts DC , but I think I may be able to do something
> with what I have. It only needs about an amp. It just needs to be a
> transformer that won't smoke, that can run off either 240 or 120 volts
> Cheers Warren
>
> Sent from Yahoo Mail on Android
> <https://go.onelink.me/107872968?pid=InProduct&c=Global_Internal_YGrowth_AndroidEmailSig__AndroidUsers&af_wl=ym&af_sub1=Internal&af_sub2=Global_YGrowth&af_sub3=EmailSignature>
>
> On Wed., 22 May 2019 at 2:07 p.m., James Glinski [email protected]
> [EVGRAY]
> <[email protected]> wrote:
>
>
> Yours is running ? Any numbers yet. ? Yes sounds like a full plate . is
> kono sick ?.  Good hunting  jim
>
> On Wednesday, May 22, 2019, Warren Keillor [email protected]
> [EVGRAY] <[email protected]> wrote:
>
>
>
>
> James
> It is the uno, at least that is the one I bought because all the ports
> match the illustrations for hook up in Patrick's document. His schematic is
> wrong in the gate driver pin out and you need to do your own drawing to get
> it routed to the mosfets. The connection points are right. You just need
> your own tangle between.
> I am still working on it
> There has been good support with zoom to the group also working on it but
> with the time change to Europe it is during our working day here making it
> difficult to keep the schedule.
> It has been a late wet spring here delaying a lot of outdoor projects, so
> being retired, is still keeping crews on the go, and machinery being
> serviced, and repaired.
> On top of it all, parallel to this Samsung project, I have 20 KW of solar
> panels going up on the barn roof. Only three years old, they were going for
> scrap if they could be removed
> All good. The barn has been totally rebuilt from new foundations to the
> twin queen posts, fresh sawn 1 3/16" barn board, 6"×6" and 8"×8" beams,
> using the old where possible. My wife, and I did the post and beam
> structure, along with part time help, but we got local guys in to put on
> the new steel roof. Everything is happening at once now that spring is
> here.( did I mention the water collection and storage?)
> These motor generator things are looking amazing, so far.
> You know, Hector has been harping on about it for years, sending us to
> Harbor Freight for generator heads, and using outrunners.
> It's all true, and prophetic, but needed the nuts and bolts details to
> build them.
> The Samsungs are still painful blisters to set in bearings and shaft, but
> people are doing it, and they are working. I have to get mine going too.
> Cheers Warren
> Sent from Yahoo Mail on Android
> <https://go.onelink.me/107872968?pid=InProduct&c=Global_Internal_YGrowth_AndroidEmailSig__AndroidUsers&af_wl=ym&af_sub1=Internal&af_sub2=Global_YGrowth&af_sub3=EmailSignature>
>
> On Tue., 21 May 2019 at 11:17 p.m., James Glinski [email protected]
> [EVGRAY]
> <[email protected]> wrote:
>
>
> Thanks warren do you know what version of aduino there using for this I
> was looking around and theres many many versions .
>
> On Tuesday, May 21, 2019, Warren Keillor [email protected]
> [EVGRAY] <[email protected]> wrote:
>
>
>
> James
> You don't have to write a program, just download the software. It has been
> done already for the Arduino.
> See and read Patrick Kelly's chapter 32.
> It's all there complete with links to the free program, done by
> volunteers, capable, like you son, to do that sort of thing.
> Every moment I spend doing it, reminds me I could be doing something fun,
> like taxes, or filling out government insurance forms.
> Cheers Warren
> Sent from Yahoo Mail on Android
> <https://go.onelink.me/107872968?pid=InProduct&c=Global_Internal_YGrowth_AndroidEmailSig__AndroidUsers&af_wl=ym&af_sub1=Internal&af_sub2=Global_YGrowth&af_sub3=EmailSignature>
>
> On Sat., 18 May 2019 at 2:49 p.m., James Glinski [email protected]
> [EVGRAY]
> <[email protected]> wrote:
>
>
> Gods I hate the idea of getting into programming a computer .my son knows
> five computer languages but not me I just have a bad altitude concering it
> .might have to change a little .shit shit shit .
>
> On Friday, May 17, 2019, Warren Keillor [email protected]
> [EVGRAY] <[email protected]> wrote:
>
>
>
> James
> I am home. UK was more than a month ahead of us for Spring.
> A crazy busy time of year here
> Back EMF? Well maybe, to time the Arduino. I just don't understand how it
> works, so I am building one, to examine it close up.
> Cheers Warren
>
> Sent from Yahoo Mail on Android
> <https://go.onelink.me/107872968?pid=InProduct&c=Global_Internal_YGrowth_AndroidEmailSig__AndroidUsers&af_wl=ym&af_sub1=Internal&af_sub2=Global_YGrowth&af_sub3=EmailSignature>
>
> On Thu., 16 May 2019 at 6:35 p.m., James Glinski [email protected]
> [EVGRAY]
> <[email protected]> wrote:
>
>
> Warren are they doing anything with the back EMF ?.are you home yet ? And
> what's happened to kono ? .
>
> On Wednesday, May 15, 2019, Warren Keillor [email protected]
> [EVGRAY] <[email protected]> wrote:
>
>
>
> Mick
> Rather than respond to spam,
> do you have a soldering iron handy?
> Patrick Kelly attempted to document a little Arduino interface circuit to
> drive a three phase brushless Samsung washing machine motor, though it may
> work for any motor of this type.
> I am receiving reports of as much as 30 KW being produced in this manner,
> totally unverified.
> As I have written before, it involves 400 pulses per second DC of about 1
> amp applied to the 36 coils(divided up into 3 sets of 12) in sequence. This
> produces a crazy amount of repulsion against the magnets, boosting the .9hp
> motor to something like 18.5hp.
> I have been thinking this is worth a try, because for me, it is very cheap
> to do, having most of the stuff laying around unemployed.
> Mounting the rotor to a shaft is a bit of a bitch, using that 21 tooth
> female spline hub on the supplied rotor.
> A clever colleague in Sweden just knocked the plastic hub off and made one
> from aluminium with a normal hole and key way and a disc with three tapped
> holes to take the rotor.
> This spirit shit is just taking up productive experiment time playing mind
> games. Just hit spam, and you will get more work done, rather than just
> wasting your time responding. I think he's a plant.
> Other such forums are experiencing similar characters doing the same kind
> of disruptions.
> Cheers Warren
> Sent from Yahoo Mail on Android
> <https://go.onelink.me/107872968?pid=InProduct&c=Global_Internal_YGrowth_AndroidEmailSig__AndroidUsers&af_wl=ym&af_sub1=Internal&af_sub2=Global_YGrowth&af_sub3=EmailSignature>
>
> On Wed., 15 May 2019 at 9:52 a.m., Mick [email protected] [EVGRAY]
> <[email protected]> wrote:
>
>
> One of the reasons I use Ryzen in all new builds
>
> https://www.guru3d.com/news- story/amd-security-
> announcement-on-falloutridl- and-zombieload-attack.html
> <https://www.guru3d.com/news-story/amd-security-announcement-on-falloutridl-and-zombieload-attack.html>
> On 5/15/2019 5:35 AM, [email protected]
> <[email protected]> [EVGRAY] wrote:
>
>
>
> https://www.rt.com/news/ 459358-zombieload-exploit- intel-processors/
> <https://www.rt.com/news/459358-zombieload-exploit-intel-processors/>
>
>
> it was the way many lurkers here  stole the magnetotransistor and other
> information  from me !
>
> Its also the way they know what` bullshit to use to counteract any
> important disclosure ....
>
> say hi to hemorroidal transformers instead of by-thoroidal ones !
>
> i post this so you all become aware how deep you all are fucked !  and
> that is was right all the time !
>
>
>
>
> (H)
>
> 
>