Body
https://www.spagyricus.com/articles/oil-of-gold-and-three-kings-elixirs-of-life-history-and-uses
On 2/12/2019 2:10 PM, Norman Wootan wrote:
>
> Bart, Please let me give you a hint regarding Replication of Gold in
> the special cell. First you have to acquire REAL gold nuggets and roll
> then out into thin sheets of pure gold electrodes. A Cathode and an
> Anode.� Do not apply any heat. Order some gold chloride solution for
> your electrolyte.� Only placer gold nuggets will work for gold in its
> native state has Oil of Gold which is totally lost in the firing,
> refining process.� Gold will not replicate without the tincture
> present, Oil Of Gold.��� Most people do not know about the Oil of Gold
> which causes the gold crystal to replicate within a quartz veins,
> naturally in the earth. https://www.kymiaarts.com/oil-of-gold.html Oil
> of Gold has the Atomic Frequency need for replication. Norm
>
> On 2/12/2019 12:55 PM, bart woodard [email protected] [EVGRAY] wrote:
>>
>> Norm,
>>
>> I have been running my gold distilled system now for a week and half
>> approx, 30 gallons.
>> Started @ 6.4 ph� and a ppm 0.
>> now�� 7.3 ph stable.�� and a ppm of 2
>> We need the vortex app implosion �� for the super bugs. So either way
>> not a waste of time.
>> https://www.google.com/search?client=firefox-b-d&q=quasiparticles
>> Will be getting lab tests.
>> I am making� gold,silver,copper,nickel and so on.
>> Norman I remember a lot of these sites from years ago. very good
>> general info. I had at the time my mentor the
>> electronic engineer whom doused every thing along the way. He claimed
>> 5.27 - .8 was better than just 528.
>> ------------------------------------------------------------------------
>> *From:* [email protected] <[email protected]> on behalf of
>> Warren Keillor [email protected] [EVGRAY]
>> <[email protected]>
>> *Sent:* February 12, 2019 11:00 AM
>> *To:* [email protected]
>> *Subject:* Re: [EVGRAY] Physicists Are Recreating 'Black Holes' in
>> The Lab With Surprising Simplicity
>>
>> Norman
>>
>> No reason why you can't.
>> Lithography, and photography, are just chemical means of using light
>> to provide the same result as you can get with an jnk jet printer,
>> except you alter the substrate, by removing that which is there, but
>> not struck by the light.
>> We did the first double sided lap top boards in North America, in
>> Canada, apart from the IBM, as wall sized artwork, then
>> photographically reduced it, and got the boards printed, then populated.
>> Silk screens are made the same way.
>> Artist's etching as well, from the 15th century, in concept, resists,
>> and acids.
>> Your vortex made larger might just as well be image captured with the
>> camera on a circular track, going around the active vortex, clear of
>> the apparatus.
>> You can not put a vortex on a turntable as it will interfere with the
>> shape
>> Once you have these captured images, a 3D printed form can be
>> accurately modeled.
>> Mind you, someone skilled in the art can quickly, and likely, match
>> the shape, by sculpting it in, clay or plasticine, so that it works fine.
>> Don't get caught up on technique.
>> Odd as it seems, it is not that difficult, whether making velocity
>> stacks for carburetors, or nozzles for rockets once that shape is
>> correct in your mind.
>> What I am saying is that an artist can see a shape, and duplicate it
>> well enough that it works.
>> Make it in Bondo, available at any automotive store. Male/female, it
>> doesn't really matter. If you have one, you have the other. One
>> becomes the mold for the other using a parting agent such as Arctic
>> Dubbin boot grease, with silicone. Bondo is cheap, and cheery and
>> will annoy the neighbors, with a bit of polyester stink, but works
>> great for mold making. Sets in 5 minutes if you use a lot of catalyst.
>> You can use the plasticine as a mold for Bondo, or Bondo, as a mold
>> for Bondo, or press plasticine into a Bondo mold to make changes to
>> your shape.
>> The thing is, let yourself be creative, and don't get hung up on
>> rigid perfection, nature is not so anal retentive, neither are bugs.
>> Cheers Warren
>> Sent from Yahoo Mail on Android
>> <https://go.onelink.me/107872968?pid=InProduct&c=Global_Internal_YGrowth_AndroidEmailSig__AndroidUsers&af_wl=ym&af_sub1=Internal&af_sub2=Global_YGrowth&af_sub3=EmailSignature>
>>
>> On Tue, 12 Feb 2019 at 8:22 AM, Norman Wootan [email protected]
>> [EVGRAY]
>> <[email protected]> wrote:
>>
>> Warren, Interesting that you brought up the subject of photo
>> lithography for chips, since back in 1981, I was designing driver
>> circuits for a new class of DC motors and got to be friends with
>> the Engineers at Texas Instruments Dallas.� I got a complete tour
>> of their facilities and was really impressed with the photo
>> lithography lab.� They had a wall very long and high with the
>> intricate details drafted of a single integrated circuit chip.
>> Photo reduction of the super high resolution image put the whole
>> wall of circuitry on a chip about 1/4" X 1/4" in size. The vacuum
>> deposition of the various elements in the chip building process
>> was fascinating.
>>
>> Now if we could do the same thing with the bug wing geometry that
>> creates the micro vortex pairs, then we could duplicate the
>> supposed effect.� Would provide experimental proof of validity.�
>> A good 3D printer would suffice.
>>
>> On 2/11/2019 10:14 AM, Mick [email protected]
>> <mailto:[email protected]> [] wrote:
>>>
>>> Warren,
>>>
>>> Great idea!� As you say it's now called 3d printing.� The best
>>> system uses the equivalent of a plasma torch to assemble from
>>> metal powders.� One can specify stainless or titanium or whatever.
>>> http://www.arcam.com/
>>>
>>> The good old days of photo lithography for chips are difficult
>>> to replicate.� The setups now are so expensive they have to
>>> amortize the systems bigtime, so it's not just the golf playing
>>> suits to blame it on.� We are down around 10nm fab now and for
>>> Intel to setup a new Fab cost about a billion dollars.� Keep in
>>> mind these are fully automated chip assembly lines not one offs.
>>> Technology is changing so fast they don't have time to use the
>>> old buildings just mothball the whole last system building and
>>> all or lose out.� AMD has gone fabless and just bids out the
>>> best silicon forge at the time.� Now that the concept is
>>> perfected there is not much of the small lithography stuff
>>> around anymore.
>>>
>>> I am sure the old machinery can be had for the cost of hauling
>>> it away if it can be located.
>>>
>>> It always helps to know someone.� I think Chuck Moore the
>>> Originator of Fourth language (the most efficient high level
>>> language) designed a system to build one offs and skip one of
>>> the expensive steps involved in forging a chip. That's funny you
>>> were able to play with substrate that could be band saw cut, how
>>> things change!
>>>
>>> On 2/11/2019 6:44 AM, Warren Keillor
>>> [email protected]
>>> <mailto:[email protected]> [EVGRAY] wrote:
>>>>
>>>> Norm
>>>>
>>>> Some number of years ago when working as director of research
>>>> for a research and development project for a medical company,
>>>> I had to come up with a way to make extremely tiny shapes, much
>>>> like your vortex problems.
>>>> The technology at the time for making logic chips, could be used.
>>>> Layers of various deposits, the shapes generated
>>>> photographically at that time, from artwork, of course, scaled
>>>> down, were able to be deposited, one, on top of another,
>>>> conceptually like 3 D printing, on a microscopic level.
>>>> Oddly enough, to get something made from your supplied artwork
>>>> was quite reasonable, compared to getting a new exhaust system
>>>> put on the car!
>>>> Back then, in the eighties, there were lots of independent
>>>> contractors with chip making capability, taking advantage of
>>>> government tax grants to encourage industry.
>>>> I'm out of touch now, but I know that you could sure make tiny
>>>> vortex nozzles that way, providing you have a usable design, by
>>>> the square meter.
>>>> When I got the chips made for the deadmau5 heads, we had to saw
>>>> them from big boards, that they were printed on, using a
>>>> bandsaw, if you can believe?
>>>> They were then cleaned up on a disc sanding machine.
>>>> They tested out with a 15% rejection rate, after, which is
>>>> about average.
>>>> In your case, you can leave them in boards to fill surfaces
>>>> perhaps?
>>>> What I am getting at, is that prototypes do not need to cost
>>>> that much.
>>>> They are the golf playing suits that suck up the funds in an
>>>> organization.
>>>> Guys willing to put skin and bones on the line, get things
>>>> done, and don't cost that much.
>>>> If you are friends with your right and left hands, it is
>>>> amazing what just one person can do.
>>>> Cheers Warren
>>>> Sent from Yahoo Mail on Android
>>>> <https://go.onelink.me/107872968?pid=InProduct&c=Global_Internal_YGrowth_AndroidEmailSig__AndroidUsers&af_wl=ym&af_sub1=Internal&af_sub2=Global_YGrowth&af_sub3=EmailSignature>
>>>>
>>>> On Mon, 11 Feb 2019 at 7:55 AM, Norman Wootan
>>>> [email protected] <mailto:[email protected]> [EVGRAY]
>>>> <[email protected]> <mailto:[email protected]> wrote:
>>>>
>>>> I have clearly stated my opinion as to how any AG effect
>>>> could occur� via the insect wing and shell theory. Vortex,
>>>> counter vortex induced flow could possibly create the
>>>> effect. It would agree with my theory of lift generated
>>>> over aircraft wings etc. in addition to Bernoulli and
>>>> Newton's third Law.� The tornado induced vortex patterns
>>>> could be� the causing factors for the AG effect we have
>>>> seen. It all goes back to the fundamentals of some sort of
>>>> ionization of objects. All of the anti-gravity examples
>>>> have one common denominator, that being ionization induced
>>>> via Acustics, Hertzian wave, Vibratory Physics or vortex
>>>> generation. All occuring down at the atomic level. Yes,
>>>> Stress Fields.
>>>>
>>>> On 2/10/2019 2:24 PM, Mick [email protected]
>>>> <mailto:[email protected]> [EVGRAY] wrote:
>>>>>
>>>>> Norm,
>>>>>
>>>>> You were friends with Jerry and I know how he was very
>>>>> insistent the Grebenikov story was real or at least full
>>>>> of substance and he is the main reason everybody in the
>>>>> West with such interests is aware of it. Personally I
>>>>> think the gluing a bunch of insect wings part is a simile
>>>>> or metaphor.
>>>>>
>>>>> What is your opinion of the story and do you believe G may
>>>>> have created a levity platform and if so how?
>>>>>
>>>>> Being that stress fields (the ones the Russians were
>>>>> studying, cant recall the name now) create vectors at 90
>>>>> degrees to the stress force I think an important part is
>>>>> imbuing this type of energy with angular momentum. Back to
>>>>> my beer can, compression on the ends expands the center.�
>>>>> We try to first save the beer for Warren.
>>>>>
>>>>>
>>>>> On 2/10/2019 6:00 AM, Norman Wootan [email protected]
>>>>> <mailto:[email protected]> [EVGRAY] wrote:
>>>>>>
>>>>>> Additional info.� See
>>>>>> http://www.rexresearch.com/pdf/levitylost.pdf
>>>>>>
>>>>>> On 2/10/2019 7:53 AM, Norman Wootan wrote:
>>>>>>>
>>>>>>> BTW, the most interesting work of Victor Schauberger was
>>>>>>> in the area of anti-gravity. One device that escapes
>>>>>>> mention was the Farrow Device. See,
>>>>>>> http://www.keelynet.com/gravity/farrow.htm� here we use
>>>>>>> Hertzian waves, EM force which in reality is what
>>>>>>> happens in the Schauberger repulsine device because of
>>>>>>> the ionization that occurs.
>>>>>>> http://rexresearch.com/farrow/farrow.htm
>>>>>>>
>>>>>>> Back in 1996, a friend showed me a photograph of Victor
>>>>>>> Schauberger and Son, Walter riding in a C-54 aircraft,
>>>>>>> looking down on Sherman, TX, the proposed re-location
>>>>>>> home. see
>>>>>>>
>>>>>>> 1958 An American consortium offers financial means for
>>>>>>> practical experiments with "Implosion Energy". Visit to
>>>>>>> Texas with his son Walter. Return to Austria after a
>>>>>>> heavy dispute. (Schauberger, Viktor) Viktor Schauberger
>>>>>>> was forced to sign an agreement, forbidding him any
>>>>>>> further research with Implosion. All documents, models
>>>>>>> and equipment are left behind in the USA. Five days
>>>>>>> after his return, Viktor Schauberger dies on September
>>>>>>> 25th ...Viktor's Children: Walter, Margarete, Huberta
>>>>>>>
>>>>>>> On 2/10/2019 7:29 AM, Norman Wootan [email protected]
>>>>>>> <mailto:[email protected]> [EVGRAY] wrote:
>>>>>>>>
>>>>>>>> https://peswiki.com/powerpedia:viktor-schauberger
>>>>>>>>
>>>>>>>> https://sanet.st/blogs/games-musics/sacred_living_geometry_the_theories_of_viktor_schauberger.2401786.html
>>>>>>>>
>>>>>>>> https://www.bibliotecapleyades.net/ciencia/ciencia_implosion.htm
>>>>>>>>
>>>>>>>> http://changingpower.net/w-baumgartner-will-be-missed/
>>>>>>>>
>>>>>>>> After studying all of Victor's works and writings and
>>>>>>>> followed Walter Baumgartner's follow up works with
>>>>>>>> Implosion Technology, I got a real surprise in the fall
>>>>>>>> of 1995.� I was in a mining camp up in BC, Canada,
>>>>>>>> where we had a community wash room, laundry area. The
>>>>>>>> owners wife asked me to look at the mop sink that would
>>>>>>>> not drain properly.� We filled the sink to maximum
>>>>>>>> capacity and pulled the drain plug. Immediately, a very
>>>>>>>> powerful vortex formed and you could look down the 1
>>>>>>>> 1/2 inch drain with the extreme vortex rotation
>>>>>>>> velocity. It would take, on average, about ten minutes
>>>>>>>> for the water to drain completely. Approximately 30
>>>>>>>> gallons of water.� Having read everything regarding the
>>>>>>>> Golden Mean Ratios and the influence in formation of
>>>>>>>> the famous Implosion vortex, I carefully measured all
>>>>>>>> the dimensions of the mop sink.� Yes, the length vs
>>>>>>>> width ratio of the sink box was a perfect 1.618 ratio
>>>>>>>> which was a major contributing factor with the very
>>>>>>>> powerful vortex formation. Instantly what popped into
>>>>>>>> my mind was to install an impeller on a shaft suspended
>>>>>>>> in the vortex core at the exit to capture the high
>>>>>>>> rotational energy.� Both Victor and Walter wrote about
>>>>>>>> the corona charge that was produced by a very tightly
>>>>>>>> defined vortex core exit. Interesting phenomenon. TRUE
>>>>>>>> STORY. BTW, the Schauberger Implosion Vortex Technology
>>>>>>>> is a perfect replicas of the Black Hole Space Phenomenon.
>>>>>>>>
>>>>>>>> On 2/10/2019 5:17 AM, Norman Wootan [email protected]
>>>>>>>> <mailto:[email protected]> [EVGRAY] wrote:
>>>>>>>>> https://www.sciencealert.com/physicists-study-a-black-hole-s-hum-in-water-swirling-down-a-plug-hole
>>>>>>>>>
>>>>>>>>> Sent from Yahoo Mail on Android
>>>>>>>>> <https://go.onelink.me/107872968?pid=InProduct&c=Global_Internal_YGrowth_AndroidEmailSig__AndroidUsers&af_wl=ym&af_sub1=Internal&af_sub2=Global_YGrowth&af_sub3=EmailSignature>
>>>>>>>>>
>>>>>>>>> Victor Schauberger "Implosion Vortex"!
>>>>
>>