Body
https://sites.google.com/site/crabtreescompendiumofesoterica/out-of-body-experiences-oobes-how-to-experience---definitions-videos-more/resonance-beings-of-frequency---melatonin-and-the-pineal-gland-more/tensor-fields-copper-coil-magic-more
Bart.
On 2/11/2019 2:39 PM, bart woodard [email protected] [EVGRAY] wrote:
>
> Guys check the math Dan has employed , I think he used similar ratios
> for his super imploder.
>
> http://www.fractalfield.com/implodermagneticresearch/
> SUPERIMPLODER: Magnetic Water Treatment IS Proven Effective: More
> Evidence - fractalfield.com
> <http://www.fractalfield.com/implodermagneticresearch/>
> Einstein:the solution to infinite non-destructive (charge)compression
> IS the unified field. ..So- if perfect compression is the solution to
> virtually every science problem in history: gravity, alchemy, fusion,
> urban design, computers.. the physics of human
> (peak)perception/bliss.. the list goes on - THEN what does it mean
> that we have just proven the (fractality perfected) wave mechanics ...
> www.fractalfield.com
>
>
>
>
>
> ------------------------------------------------------------------------
> *From:* [email protected] <[email protected]> on behalf of
> Mick [email protected] [EVGRAY] <[email protected]>
> *Sent:* February 11, 2019 2:35 PM
> *To:* [email protected]
> *Subject:* Re: [EVGRAY] Physicists Are Recreating 'Black Holes' in The
> Lab With Surprising Simplicity
>
> Warren,
>
> If one desired to replicate the whorl of a vortex in a sink draining
> can you think of a way one could freeze the water of some other liquid
> fast enough to be able to bandsaw through the ice to make an accurate
> mold?
>
> Maybe a regular freeze job would work, easy to try up where you are
> with one of those 5 or 10 gallon horse water buckets.
>
> It would be super cool to have an exact vortex dimension!
>
> I can only hope the mom and pops are left that can create amazing
> things but every time I go to find one of these it's often a retired
> machinist in his 70's or older.� We do as you say now have 3d printers
> so this opens up all sort of new potentials.�� I just wish I could get
> a small shop size Arcam for under a grand, then it would be party
> time.� I can't find anything affordable that 3d prints metal at high
> tolerance without polymer binders and kiln process in which finished
> work which looks like wax on a sunny day.� So far the EDM powder 3d
> process looks like the best one running.�� Not sure why no one has
> miniaturized to lets say a 10 grand unit. Just the work off plastic
> molds it could pay for itself the first job.
>
> You found someone who made custom size tires and vulcanized their own
> rubber, that's quite the find!
>
> On 2/11/2019 9:34 AM, Warren Keillor [email protected]
> <mailto:[email protected]> [EVGRAY] wrote:
>>
>> Mick
>>
>> There are little mom and pop shops still eecking out a living making
>> old fashioned chips with lithography, I bet, since some low
>> production industries still sell a limited number of specialized
>> units made in this country, and certainly, in the states.
>> I found a truck tire manufacturer in the States that, believe it or
>> not, was not even connected to the internet, let alone having a web site.
>> I got my antique truck tires of the weird size, at a fair price, and
>> am quite happy with the quality.
>> In conclusion, we are not the only ones needing to make stuff.
>> Asking around works
>> Cheers Warren
>> Sent from Yahoo Mail on Android
>> <https://go.onelink.me/107872968?pid=InProduct&c=Global_Internal_YGrowth_AndroidEmailSig__AndroidUsers&af_wl=ym&af_sub1=Internal&af_sub2=Global_YGrowth&af_sub3=EmailSignature>
>>
>> On Mon, 11 Feb 2019 at 11:15 AM, Mick [email protected]
>> <mailto:[email protected]> [EVGRAY]
>> <[email protected]> <mailto:[email protected]> wrote:
>>
>> Warren,
>>
>> Great idea!� As you say it's now called 3d printing.� The best
>> system uses the equivalent of a plasma torch to assemble from
>> metal powders.� One can specify stainless or titanium or whatever.
>> http://www.arcam.com/
>>
>> The good old days of photo lithography for chips are difficult to
>> replicate. The setups now are so expensive they have to amortize
>> the systems bigtime, so it's not just the golf playing suits to
>> blame it on.� We are down around 10nm fab now and for Intel to
>> setup a new Fab cost about a billion dollars.� Keep in mind these
>> are fully automated chip assembly lines not one offs.� Technology
>> is changing so fast they don't have time to use the old buildings
>> just mothball the whole last system building and all or lose
>> out.� AMD has gone fabless and just bids out the best silicon
>> forge at the time.� Now that the concept is perfected there is
>> not much of the small lithography stuff around anymore.
>>
>> I am sure the old machinery can be had for the cost of hauling it
>> away if it can be located.
>>
>> It always helps to know someone.� I think Chuck Moore the
>> Originator of Fourth language (the most efficient high level
>> language) designed a system to build one offs and skip one of the
>> expensive steps involved in forging a chip. That's funny you were
>> able to play with substrate that could be band saw cut, how
>> things change!
>>
>> On 2/11/2019 6:44 AM, Warren Keillor
>> [email protected]
>> <mailto:[email protected]> [EVGRAY] wrote:
>>>
>>> Norm
>>>
>>> Some number of years ago when working as director of research
>>> for a research and development project for a medical company,
>>> I had to come up with a way to make extremely tiny shapes, much
>>> like your vortex problems.
>>> The technology at the time for making logic chips, could be used.
>>> Layers of various deposits, the shapes generated
>>> photographically at that time, from artwork, of course, scaled
>>> down, were able to be deposited, one, on top of another,
>>> conceptually like 3 D printing, on a microscopic level.
>>> Oddly enough, to get something made from your supplied artwork
>>> was quite reasonable, compared to getting a new exhaust system
>>> put on the car!
>>> Back then, in the eighties, there were lots of independent
>>> contractors with chip making capability, taking advantage of
>>> government tax grants to encourage industry.
>>> I'm out of touch now, but I know that you could sure make tiny
>>> vortex nozzles that way, providing you have a usable design, by
>>> the square meter.
>>> When I got the chips made for the deadmau5 heads, we had to saw
>>> them from big boards, that they were printed on, using a
>>> bandsaw, if you can believe?
>>> They were then cleaned up on a disc sanding machine.
>>> They tested out with a 15% rejection rate, after, which is about
>>> average.
>>> In your case, you can leave them in boards to fill surfaces perhaps?
>>> What I am getting at, is that prototypes do not need to cost
>>> that much.
>>> They are the golf playing suits that suck up the funds in an
>>> organization.
>>> Guys willing to put skin and bones on the line, get things done,
>>> and don't cost that much.
>>> If you are friends with your right and left hands, it is amazing
>>> what just one person can do.
>>> Cheers Warren
>>> Sent from Yahoo Mail on Android
>>> <https://go.onelink.me/107872968?pid=InProduct&c=Global_Internal_YGrowth_AndroidEmailSig__AndroidUsers&af_wl=ym&af_sub1=Internal&af_sub2=Global_YGrowth&af_sub3=EmailSignature>
>>>
>>> On Mon, 11 Feb 2019 at 7:55 AM, Norman Wootan
>>> [email protected] <mailto:[email protected]> [EVGRAY]
>>> <[email protected]> <mailto:[email protected]> wrote:
>>>
>>> I have clearly stated my opinion as to how any AG effect
>>> could occur� via the insect wing and shell theory. Vortex,
>>> counter vortex induced flow could possibly create the
>>> effect. It would agree with my theory of lift generated over
>>> aircraft wings etc. in addition to Bernoulli and Newton's
>>> third Law.� The tornado induced vortex patterns could be�
>>> the causing factors for the AG effect we have seen. It all
>>> goes back to the fundamentals of some sort of ionization of
>>> objects. All of the anti-gravity examples have one common
>>> denominator, that being ionization induced via Acustics,
>>> Hertzian wave, Vibratory Physics or vortex generation. All
>>> occuring down at the atomic level. Yes, Stress Fields.
>>>
>>> On 2/10/2019 2:24 PM, Mick [email protected]
>>> <mailto:[email protected]> [EVGRAY] wrote:
>>>>
>>>> Norm,
>>>>
>>>> You were friends with Jerry and I know how he was very
>>>> insistent the Grebenikov story was real or at least full of
>>>> substance and he is the main reason everybody in the West
>>>> with such interests is aware of it. Personally I think the
>>>> gluing a bunch of insect wings part is a simile or metaphor.
>>>>
>>>> What is your opinion of the story and do you believe G may
>>>> have created a levity platform and if so how?
>>>>
>>>> Being that stress fields (the ones the Russians were
>>>> studying, cant recall the name now) create vectors at 90
>>>> degrees to the stress force I think an important part is
>>>> imbuing this type of energy with angular momentum. Back to
>>>> my beer can, compression on the ends expands the center.�
>>>> We try to first save the beer for Warren.
>>>>
>>>>
>>>> On 2/10/2019 6:00 AM, Norman Wootan [email protected]
>>>> <mailto:[email protected]> [EVGRAY] wrote:
>>>>>
>>>>> Additional info.� See
>>>>> http://www.rexresearch.com/pdf/levitylost.pdf
>>>>>
>>>>> On 2/10/2019 7:53 AM, Norman Wootan wrote:
>>>>>>
>>>>>> BTW, the most interesting work of Victor Schauberger was
>>>>>> in the area of anti-gravity. One device that escapes
>>>>>> mention was the Farrow Device. See,
>>>>>> http://www.keelynet.com/gravity/farrow.htm� here we use
>>>>>> Hertzian waves, EM force which in reality is what happens
>>>>>> in the Schauberger repulsine device because of the
>>>>>> ionization that occurs.
>>>>>> http://rexresearch.com/farrow/farrow.htm
>>>>>>
>>>>>> Back in 1996, a friend showed me a photograph of Victor
>>>>>> Schauberger and Son, Walter riding in a C-54 aircraft,
>>>>>> looking down on Sherman, TX, the proposed re-location
>>>>>> home. see
>>>>>>
>>>>>> 1958 An American consortium offers financial means for
>>>>>> practical experiments with "Implosion Energy". Visit to
>>>>>> Texas with his son Walter. Return to Austria after a
>>>>>> heavy dispute. (Schauberger, Viktor) Viktor Schauberger
>>>>>> was forced to sign an agreement, forbidding him any
>>>>>> further research with Implosion. All documents, models
>>>>>> and equipment are left behind in the USA. Five days after
>>>>>> his return, Viktor Schauberger dies on September 25th
>>>>>> ...Viktor's Children: Walter, Margarete, Huberta
>>>>>>
>>>>>> On 2/10/2019 7:29 AM, Norman Wootan [email protected]
>>>>>> <mailto:[email protected]> [EVGRAY] wrote:
>>>>>>>
>>>>>>> https://peswiki.com/powerpedia:viktor-schauberger
>>>>>>>
>>>>>>> https://sanet.st/blogs/games-musics/sacred_living_geometry_the_theories_of_viktor_schauberger.2401786.html
>>>>>>>
>>>>>>> https://www.bibliotecapleyades.net/ciencia/ciencia_implosion.htm
>>>>>>>
>>>>>>> http://changingpower.net/w-baumgartner-will-be-missed/
>>>>>>>
>>>>>>> After studying all of Victor's works and writings and
>>>>>>> followed Walter Baumgartner's follow up works with
>>>>>>> Implosion Technology, I got a real surprise in the fall
>>>>>>> of 1995.� I was in a mining camp up in BC, Canada, where
>>>>>>> we had a community wash room, laundry area. The owners
>>>>>>> wife asked me to look at the mop sink that would not
>>>>>>> drain properly.� We filled the sink to maximum capacity
>>>>>>> and pulled the drain plug. Immediately, a very powerful
>>>>>>> vortex formed and you could look down the 1 1/2 inch
>>>>>>> drain with the extreme vortex rotation velocity. It
>>>>>>> would take, on average, about ten minutes for the water
>>>>>>> to drain completely. Approximately 30 gallons of water.�
>>>>>>> Having read everything regarding the Golden Mean Ratios
>>>>>>> and the influence in formation of the famous Implosion
>>>>>>> vortex, I carefully measured all the dimensions of the
>>>>>>> mop sink.� Yes, the length vs width ratio of the sink
>>>>>>> box was a perfect 1.618 ratio which was a major
>>>>>>> contributing factor with the very powerful vortex
>>>>>>> formation. Instantly what popped into my mind was to
>>>>>>> install an impeller on a shaft suspended in the vortex
>>>>>>> core at the exit to capture the high rotational energy.�
>>>>>>> Both Victor and Walter wrote about the corona charge
>>>>>>> that was produced by a very tightly defined vortex core
>>>>>>> exit. Interesting phenomenon. TRUE STORY. BTW, the
>>>>>>> Schauberger Implosion Vortex Technology is a perfect
>>>>>>> replicas of the Black Hole Space Phenomenon.
>>>>>>>
>>>>>>> On 2/10/2019 5:17 AM, Norman Wootan [email protected]
>>>>>>> <mailto:[email protected]> [EVGRAY] wrote:
>>>>>>>> https://www.sciencealert.com/physicists-study-a-black-hole-s-hum-in-water-swirling-down-a-plug-hole
>>>>>>>>
>>>>>>>> Sent from Yahoo Mail on Android
>>>>>>>> <https://go.onelink.me/107872968?pid=InProduct&c=Global_Internal_YGrowth_AndroidEmailSig__AndroidUsers&af_wl=ym&af_sub1=Internal&af_sub2=Global_YGrowth&af_sub3=EmailSignature>
>>>>>>>>
>>>>>>>> Victor Schauberger "Implosion Vortex"!
>>>
>