Body
See Comments.
On 2/10/2019 1:13 PM, bart woodard [email protected] [EVGRAY] wrote:
>
> Norman,
>
> �������� Well...!!! �� I am trying to understand what you are up to
> yourself here with the dotto work? . lol
> Are you trying to strengthen some ones dna on a schedules support from
> afar?
> �The anti gravity results are more thoughts that seem to be chatted on.
The only reason that I constructed a small version of the Dotto Ring was
to verify the generation of a DC current flow in the copper ring via
application of heat and cold. If Ohms Law is to be believed then there
is a very unusual DC counter current flow taking place obeying the
Thompson, Seebeck and Peltier effects that I wrote about in my paper,
What is Heat.�� It would take quite an investment of money and time to
duplicate the original Dotto Ring.�� I'm sure the anti-gravity effect
was the same that we saw in the Neiper Ring experiments which we documented.
> When I listened to Lazar and the 117 element (If I am correct with
> memory ) , he was saying the diffuse-rs were really gig coils
> that moved for direction.� I had chatted with him on the discussion of
> designing some kind of flowing gravy for my heat pump.
> Incorporating the flow battery concept.
> We were to regroup later but never did. In his defense he had a
> contract to for-fill and I was stealing his time.
> So maybe some time in the future perhaps ?� .
> So ok .. What am I trying to build..?
>
> Currently I have three projects that I am trying to get over the
> edge.� They all have some merits with in their make up.
> 1/ reactor combination hho cell - can run ic motor for 30-60 (low
> idle) min on 100%.
> Currently needs a new controller and monitoring for complete cycle event.
>
> 2/ heat pump- have done and completed tests with chief engineer
> signing on tests results. cop 1.25
https://www.sprsunheatpump.com/5P-High-Cop-Air-to-Water-Heat-Pump-Heating-and-Hot-Water-Heater-pd6267665.html
This is an example of off the shelf unit using the Copland Scroll
Compressor which give a great COP.
>
> 3/water structuring , using vortex's with mags� enhancing parts per
> million on implosion values and ec.
> Have blood results before and after resulting in positive healing
> values for all participants.
> Ismael has gotten 80% but really he can get 100% -� 5, perhaps he can
> but does not want to say.
I have been using the old Dr. John Mileweski magnet water treatment
since 2001 when I first met him in Albuquerque.
Dr. Johns wife planter being fed magnet water.� Real healthy.
>
> You yourself know whats possible.
> All operate with in similar principles.
> The water structuring unit is the one most ready for market and I have
> parties interested in taking it.
> Just have to scale it down for the kitchen counter top . Then go for
> patent pending or what ever.
> I had acceptance on a patent for the heat pump but could not follow
> through on the finances required, so I copyrighted it.
Sonodiffusser Patent sold to finance my Research Farm.��� infused 60mg
oxygen into water and it was persistant over sever weeks. Very healthy
water.
------------------------------------------------------------------------
*United States Patent * *6,386,751*
*Wootan , � et al.* *May 14, 2002 *
------------------------------------------------------------------------
Diffuser/emulsifier
*Abstract*
A diffuser for incorporating one or more infusion materials into a host
material. The diffuser includes a rotor 12 and stator 30 rotating
relative to one another. The infusion materials are drawn through
openings in the rotor and stator. During movement of the rotor, the
openings cause cavitation of the host material in the channel 32
resulting in diffusion of the infusion materials through the openings
and into the host material. The opening patterns in the rotor and stator
can be designed to operate at a single frequency or a multiple
frequencies. The frequencies of operation may affect bonding between the
infusion materials and the host material and may also be effective in
breakdown of complex molecular structures.
> I have a lot of responsibilities from� day to day week to week and
> need to change hats often, so when I can do something
> it has to be done under its own schedule or it may not happen at all
> kind of thing.
> As far as the dope thing! LOl�� It was a way to generate financing
> only , I smoked some joints when I was in my teens
> now I am in the 60 s .� lol� The young friend has his newly acquired
> masters in genetics and I was going to go into a
> commercial government operation with him but he is getting offers now
> for 350k per year so I told him to go.
> Not to wait for me.
>
> So, so far a lot of nothing�� lol
>
>
>
> ------------------------------------------------------------------------
> *From:* [email protected] <[email protected]> on behalf of
> Norman Wootan [email protected] [EVGRAY] <[email protected]>
> *Sent:* February 9, 2019 7:41 PM
> *To:* [email protected]
> *Subject:* Re: [EVGRAY] Patent, Dotto
>
> Bart, Man slow down.� Sounds like you have been smoking your crop. I
> would like to help you understand something, If I could figure out
> what you are tying to build?????
>
> On 2/9/2019 1:51 PM, bart woodard [email protected]
> <mailto:[email protected]> [EVGRAY] wrote:
>> �
>> Norman,
>>
>> ��������� I am trying to comprehend and envision
>> your build with the desired outcome.
>> Once I was a millwright for a Hudson Bay store, once finished i had a
>> truck load of lexan� cuts.
>> I used them up over the years . I made some vacuum sealed boxes and
>> had leads through for convenience.
>> Perhaps the same could be done and inject a low value of a
>> phosphorous combination (aluminum, magnesium or what have you) in
>> reference to
>> have a visual on the charging vortex's� shape and desire of results
>> on input.
>>
>> ------------------------------------------------------------------------
>> *From:* [email protected] <mailto:[email protected]>
>> <[email protected]> <mailto:[email protected]> on behalf of
>> Norman Wootan [email protected] <mailto:[email protected]> [EVGRAY]
>> <[email protected]> <mailto:[email protected]>
>> *Sent:* February 9, 2019 11:17 AM
>> *To:* [email protected] <mailto:[email protected]>
>> *Subject:* Re: [EVGRAY] Patent, Dotto
>> �
>> �
>>
>> Ole, take the time to watch this interesting presentation at the
>> Royal Institute.� http://vega.org.uk/video/programme/66
>>
>> On 2/9/2019 9:52 AM, [email protected]
>> <mailto:[email protected]> [EVGRAY] wrote:
>>> �
>>>
>>> Hi Norman,
>>>
>>> After reading about the Dotto ring it does look amazing. My belief
>>> is that the field given off by the ring is a powerful motional
>>> electric field (W.J. Hooper's research
>>> http://www.rexresearch.com/hooper/gibson.htm). This could explain
>>> the antigravity effect. According to Hooper the electrons move
>>> faster in hot metals than in cold metals. At constant current in
>>> cold conductors few electrons move at a high speed while in hot
>>> conductors many electrons move at low speed. As the magnetic field
>>> is determined by the current only there's no difference in its size
>>> because of the temperature of the conductor. But as the motional
>>> electric field is also determined by the speed of the charges this
>>> has great influence on the size of the motional electric field. As
>>> the Dotto ring has different temperatures along the ring this means
>>> decelerating the speed of the electrons which again means
>>> electromagnetic radiation as in antennas. Citing from the F. Gibson
>>> report (http://www.rexresearch.com/hooper/gibson.htm):
>>>
>>> "These experiments show that the number of conduction electrons
>>> remains fairly constant at room temperatures and that the drift
>>> velocity increases linearly with the current. When resistance in the
>>> form of heat, carbon pile rheostat, or photo floods was added to the
>>> circuit, the number of conduction electrons decreased from that of
>>> room temperature and normal resistance while the drift velocity
>>> increased. At dry ice temperature and at low current, there were
>>> almost ten times as many conduction electrons moving, but moving
>>> very slowly, like cars on a crowded highway. As the amperage
>>> increased, the number of conduction electrons decreased rapidly,
>>> causing a greatly accelerated increase in the electron drift
>>> velocity. When AC current was put in the generator, it appeared that
>>> 3 to 4 times as many electrons were moving at low amperage as move
>>> under DC current at room temperature, but as with dry ice, when more
>>> electrons were moving, they were moving very slowly. By the time the
>>> amperage increased to 20 amps the number of electrons had decreased
>>> to almost the same number as with DC current at room temperature.
>>> From 20 to 30 amps the number of electrons remained fairly constant.
>>> The electron drift velocity increased rapidly at low amperages and
>>> continued to increase but at a decreasing rate at higher amperages.�
>>>
>>> These observations regarding electron drift velocity and number of
>>> conduction electrons would appear to be more consistent with current
>>> theory regarding gases, semiconductors, and semi-metals, than with
>>> the current theory for metals. If these findings are true, they
>>> would seem to indicate that the conductivity of a metal is related
>>> to the number of electrons in motion and their velocity, both of
>>> which change with temperature and resistance."
>>>
>>> Looking at Alexey Chekurov's antigravity device this also has
>>> variable motional fields as well as a conventional permanent
>>> magnetic field which is actually rotating like in motors and
>>> generators. The motional part is done by mechanical rotating the
>>> rippled discs which gives much higher speeds than the normal
>>> conduction speed of electrons in metals.
>>>
>>> In the Dotto paper is mentioned scalar waves which is an oxymoron as
>>> waves can't be scalars and vice versa. Waves have a time factor as
>>> well as a direction besides their size (scalar) which is varying too.
>>>
>>> Regards
>>> Ole
>>>
>>>
>>> ---In [email protected] <mailto:[email protected]>,
>>> <nwootan@...> <mailto:nwootan@...> wrote :
>>>
>>> https://www.remedyspot.com/content/topic/1430589-dotto-ring/
>>>
>>> http://www.keelynet.com/biology/dotto.htm
>>>
>>> What is the Thompson Effect?
>>>
>>>
>>> One end of a copper rod is heated and the other is cooled.
>>> If the hot side is heated high enough, it will thermally
>>> increase the kinetic energy of the outer orbit electrons to
>>> a point where their kinetic energy (1/2 mv squared) will be
>>> greater than the work function and allow them to discharge
>>> into space. Due to the copper conductivity the electrons,
>>> instead of dissipating into the air, will shift in
>>> tremendous quantity toward the cool side in straight lines,
>>> following the heat propagation velocity. By reaction,
>>> excited electrons from the cool side will travel in the
>>> opposite direction at the speed of a particle (1/2 mv
>>> squared) toward the hot side encircling the copper rod by
>>> gyroscopic phenomenon and following the Fleming's rule. The
>>> product is very low voltage (few millivolts) as a resultant
>>> of the electrons traveling in circular motion. But, as in
>>> any electrical circuit, the EMF in the copper rod is
>>> governed by the Ohm's law (E/R=I), and will be in the range
>>> of several thousand amperes.
>>>
>>> Peltier Effect
>>>
>>>
>>> In a metal alloy bar (such as constantan, 60% Cu, 40% Ni)
>>> one end is heated and the other is maintained cold. When the
>>> hot end is heated enough, electrons of nickel and copper
>>> atoms become excited. The electrons of nickel force the
>>> electrons of coper to reverse orbital spinning (as described
>>> in Part 1). By centripetal force electrons from the cool
>>> side shift toward the hot side. The hot side becomes
>>> negative in respect to the cold positive side, exactly
>>> opposite to the Thompson effect. Of course, the Thompson and
>>> the Peltier effects are temporary; they last only until the
>>> proportion between the cool and the hot side reaches the
>>> electrons numerical balance. Let's now combine the Thompson
>>> and Peltier effects together in the thermocouple fashion. In
>>> the Thompson effect the electrons move from the hot side
>>> toward the cold side.
>>>
>>> Ole, Hermes, I suggest a little pipe smoking time here and grasp the
>>> whole theory of operation.� Norm
>>>
>>>
>>> On 2/8/2019 6:26 AM, Norman Wootan wrote:
>>>
>>>> https://patents.google.com/patent/US3839771��� Simple
>>>> reading and reading comprehension are totally different
>>>> animals.� Please read the Rex Research article to understand
>>>> how the Dotto Ring worked with the DNA of the body. My
>>>> understanding of the ring and counter flow of high amperage
>>>> cyclic currents� within the copper gave a scarlar effect in
>>>> that there was partial magnetic field cancellation and even
>>>> possible reconnect phenomenon since there was an emission of
>>>> photon energy when in operation.� The reason for my bringing
>>>> up of the Dotto Ring was to alert you as to the possible
>>>> reconnect phenomenon here in this device. I was very interested
>>>> in the temperature differential causing the anti-gravity effect
>>>> just as Walter Russel had mentioned. Here we get back into on
>>>> of my pet theory of ionization causing the AG effect.
>>>>
>>>> On 2/7/2019 5:32 PM, onielsen@... <mailto:onielsen@...>
>>>> [EVGRAY] wrote:
>>>>> �
>>>>>
>>>>> Hi Hermes,
>>>>>
>>>>> "What happens with Lenz Law in an inductor if a capacitor is
>>>>> added?"
>>>>> Nothing will happen to Lenz's law by adding capacitors. The
>>>>> reactive part of the power can be shifted from inductive power
>>>>> to capacitive power or simply cancel the inductive power when
>>>>> at resonance. At resonance the inductive reactance is equal in
>>>>> size to the capacitive reactance but of opposite sign. This
>>>>> makes them cancel to leave only the resistive part of the circuit.
>>>>>
>>>>> >From Wikipedia:
>>>>> Lenz's law <https://en.wikipedia.org/wiki/Lenz%27s_law> states
>>>>> that the direction of the current induced in a conductor by a
>>>>> changing magnetic field
>>>>> <https://en.wikipedia.org/wiki/Magnetic_field> is such that
>>>>> the magnetic field created by the induced current opposes the
>>>>> initial changing magnetic field. This is similar to Newtons
>>>>> third law
>>>>> <https://en.wikipedia.org/wiki/Newton%27s_laws_of_motion#Newtons_3rd_Law>
>>>>> of motion in physics when talking about motion of bodies: "Law
>>>>> III: To every action there is always opposed an equal
>>>>> reaction: or the mutual actions of two bodies upon each other
>>>>> are always equal, and directed to contrary parts."
>>>>>
>>>>> Regards
>>>>> Ole
>>>>>
>>>>>
>>>>>
>>>>> ---In [email protected] <mailto:[email protected]>,
>>>>> <hermesatar@...> <mailto:hermesatar@...> wrote :
>>>>>
>>>>> "Wouldn't it be easier and more energy efficient to use 1000
>>>>> turns for a winding and then send one or more amps of current
>>>>> through it?"
>>>>>
>>>>> What happens with Lenz Law in an inductor if a capacitor is
>>>>> added? Best Wishes, Hermes
>>>>>
>>>>> Den torsdag 7 februari 2019 15:28:28 CET, onielsen@...
>>>>> [EVGRAY] <[email protected]>
>>>>> <mailto:[email protected]> skrev:
>>>>>
>>>>>
>>>>> �
>>>>>
>>>>> Wouldn't it be easier and more energy efficient to use 1000
>>>>> turns for a winding and then send one or more amps of current
>>>>> through it? That way at least a thousand amps magnetic field
>>>>> is made.
>>>>>
>>>>> Regards
>>>>> Ole
>>>>>
>>>>>
>>>>>
>>>>> ---In [email protected] <mailto:[email protected]>,
>>>>> <wall_jakob@...> <mailto:wall_jakob@...> wrote :
>>>>>
>>>>> In canada its probably good enought just to stick the copperr
>>>>> bar tru the wall, -23 outsiide, +22 inside
>>>>> = 55 Degree difference, here you go. Don't forget to wind a
>>>>> nice coil around the rod. ''Thousends of amps''
>>>>> should be enough to induce 30 amps 115volt after transforming
>>>>> the voltage to 115Volt
>>>>> Would be nice if it could be thru:
>>>>> --------------------------------------------
>>>>>
>>>>> On Sun, 2/3/19, Warren Keillor
>>>>> schoonersolsticemoon@...
>>>>> <mailto:schoonersolsticemoon@...> [EVGRAY]
>>>>> <[email protected]
>>>>> <mailto:[email protected]>> wrote:
>>>>>
>>>>> Subject: Re: Fwd: Re: [EVGRAY] Patent, Dotto
>>>>> To: "[email protected]
>>>>> <mailto:[email protected]>"
>>>>> <[email protected] <mailto:[email protected]>>
>>>>> Received: Sunday, February 3, 2019, 7:58
>>>>> Norman
>>>>> couldn't open the attachment link on my phone, but your
>>>>> description of the ring experiment was cool, so to
>>>>> speak.So,
>>>>> you take a 3 foot length of solid copper bar stock 1/2"
>>>>> thick, and roll it in a ring. Heat one end, and freeze the
>>>>> other to get a potential difference between the
>>>>> ends?You
>>>>> say current? Lots of current? How does it manifest
>>>>> itself?
>>>>> A
>>>>> CO2 fire extinguisher gets you dry ice any time you want
>>>>> it.Butane,
>>>>> propane, what ever, gets you heat, maybe concentrated
>>>>> sunlight?Now
>>>>> lets talk making a practical fun gadget here! You
>>>>> suggest a
>>>>> lot of amps. How do you lead those suckers out of you toy,
>>>>> into the big World so we can have fun with them.Can
>>>>> it make the tires of my Tesla screech? A hot rodder's
>>>>> super charger on command?Pull
>>>>> you electric airplane out of a stall?What
>>>>> do we have here?Cheers
>>>>> Warren
>>>>> Sent
>>>>> from Yahoo Mail on Android
>>>>> On Sun, 3 Feb 2019 at 8:25
>>>>> AM, Norman Wootan nwootan@... <mailto:nwootan@...>
>>>>> [EVGRAY]<[email protected]
>>>>> <mailto:[email protected]>>
>>>>> wrote:
>>>>> �
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> Talking about Anti-Gravity, take a look at this
>>>>> Patent.�
>>>>> https://patents.google.com/patent/US3839771
>>>>> I actually formed a Dotto ring out of 2 inch wide X
>>>>> 1/2 inch
>>>>> thick X 36 inch long yielding a 12 inch� of pure
>>>>> copper bar stock
>>>>> into the familiar ring design of Dotto. By heating one
>>>>> end of ring
>>>>> with butane flame and cooling other end with liquid
>>>>> CO2, measured
>>>>> the millivolt differential of the ring ends and ,
>>>>> using Ohms Law
>>>>> calculated a flowing current of several thousands of
>>>>> amps. You say
>>>>> , Flowing with open circuit of ring ends,� the
>>>>> current flows one
>>>>> way on the surface of the copper and returns to the
>>>>> other end via
>>>>> the core conductivity.�� Really strange.� The
>>>>> bridge is made of
>>>>> material which will cause oscillations in the current
>>>>> flow of
>>>>> which I never built.� At least I did the
>>>>> experiment.
>>>>>
>>>>>
>>>>>
>>>>> ...
>>>>>
>