Body
Ole, I am in total agreement with you on using this mew knowledge of
magnetic flux conversion to useful energy just as Tesla stated below.
Yes, all of space and the universe is DYNAMIC/ KINETIC so we do have a
chance.
The weapons problem stems from the big money dumped into research by the
Defense Departments of Governments of which big Universities' Research
Programs thrive. Follow the money. I firmly believe in the Super Light
Theory in that this all pervasive energy is super penetrating and has
all the characteristics of super light. Super luminal velocities. There
has been so much written on this subject by those that have gone before
us. Thanks! norm
On 12/31/2018 10:31 AM, [email protected] [EVGRAY] wrote:
>
> Hi Norman,
>
> I don't think all this new technology should be used for weapons. A
> better way of using it would be for making our lives better by setting
> us free.
>
> Magnetic field lines are some late middle age construct and
> mathematical description of fields. I consider magnetic fields more
> like some ultra-waves that are all penetrating. These are the waves
> making up physical matter like in the Rhythmodynamics theory or the
> theory of W.B. Smith. This way all forces of nature can be unified
> into the same fundamental fields. When looking at the interference
> patterns of the waves it may look like lines but they're actually
> still waves. Thus annihilating magnetic flux lines are actually just
> changing the interference patterns of the waves.
>
> Source of image:
> http://psychedelic-information-theory.com/interference-pattern.
>
> What looks like field lines are interference of waves from only two
> plane wave transmitters. Here is an animated gif of a similar pattern:
>
> https://media.giphy.com/media/3VnrF8u62XQpq/giphy.gif
> Different combination of waves can make up the different elementary
> particles starting from the electron and positron over quarks (bunches
> of three electrons) to more complex elementary particles.
>
> The theories behind this are what were known as ether theories
> requiring some media for transference of the waves or forces.
> According to transmission line theory (e.g. the theory of Ivor Catt)
> even the vacuum of space has physical properties like the permittivity
> and permeability of vacuum indicating that there is something there
> instead of emptiness. This is shown by what Forrest Bishop terms the
> forbidden equations. 'The Forbidden Equation: i = qc':
> https://wiki.naturalphilosophy.org/index.php?title=The_Forbidden_Equation:_i_%3D_qc
>
> Reforming Electromagnetic Units, Equations, and Concepts: An Extension
> of Ivor Catt Theory:
> https://wiki.naturalphilosophy.org/index.php?title=Reforming_Electromagnetic_Units,_Equations,_and_Concepts:_An_Extension_of_Ivor_Catt_Theory
>
> Regards
> Ole
>
>
>
> ---In [email protected], <nwootan@...> wrote :
>
> https://en.m.wikipedia.org/wiki/Directed-energy_weapon This document
> is a pretty good review of the DEW technology so far. My prime
> interest is in the annihilation of magnetic flux which according to
> the Wired article produces a stream of particles that can be focused
> and channeled to a target. My question is, What are the particles that
> composed the magnetic flux before destruction and do they comply with
> the SUPER LIGHT theory. Folks, this is whole new ball game if we can
> create vast energy from directly destroying magnet flux. Kone, just
> blow up a few of your 1.5 Tesla one inch cube magnets and have a
> direct generation of "pressure-induced magnetic phase transition."
> electric output in KV @ KA. BTW, this is one for Ole to comment
> on. Lol
>
> On 12/30/2018 1:51 PM, Norman Wootan wrote:
>
>> To add to the info on the Neo magnetic NNEMP weapon, take a look
>> at this Army doc. https://www.wired.com/2009/03/army-turns-bomb/
>> In the old Flux compression Generators there was a need for HV
>> capacitor bank and a long solenoid coil to provide the powerful
>> magnetic flux field needed to be annihilated which yielded the
>> EMP (Magneto-electric pulse). It reasoned that the new family
>> of Neo magnets held the necessary flux strength which negated the
>> heavy capacitors and copper solenoid coil. With a super fast
>> explosive , Octanitrocubane could destroy the Neo's in the
>> nanosecond range needed for the EMP shot (magnetic flux converted
>> into particle flux which is the constituents of the magnetic field)
>>
>> https://en.m.wikipedia.org/wiki/Octanitrocubane
>>
>>
>> On 12/30/2018 11:42 AM, Norman Wootan nwootan@...
>> <mailto:nwootan@...> [EVGRAY] wrote:
>>>
>>> Remember that my main line of research is the Magnetic flux
>>> annihilation-Reconnect EMP phenomenon. Here is a first step
>>> into learning more about the Magnetoelectric effect. Just build
>>> sensors. See attachment. Now that you have a sensor lets look at
>>> the Magnetoelectric (EMP output when you destroy a very powerful
>>> neo magnet via rapid explosives. Remember that energy cannot be
>>> destroyed but can convert into another form of energy we call
>>> the Magnetoelectric EMP. See
>>> https://en.m.wikipedia.org/wiki/Explosive-driven_ferromagnetic_generator
>>> This is a direct conversion of powerful magnetic flux field
>>> directly into very high power electrical output.
>>>
>>> On 12/30/2018 11:29 AM, Norman Wootan wrote:
>>>>
>>>> Tesla's Pyro generator to which I referred which took advantage
>>>> of iron phase shift.
>>>>
>>>> https://teslauniverse.com/nikola-tesla/patents/us-patent-428057-pyromagneto-electric-generator
>>>>
>>>> Somewhere here we have to jump back and address IONS both positive and negative. See my 1996 paper for KeelyNet titled WHAT is Heat which dealt with ionization and its potential. The loss or gain of electrons in the atomic lattice causes the precise predictability of the various phase change points.
>>>>
>>>> This is the Bad Boy that I wanted to build using nitrogen gas and an alpha emitter electrodes.
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> What is Heat #2
>>>>
>>>> For about 10 years I have been studying the effects of
>>>>
>>>> heating and cooling associated with the phase change of
>>>>
>>>> liquids with the hope of building a simple generator of
>>>>
>>>> electrical power around the phenomenon.The reason for this
>>>>
>>>> interest is based on the theory that energy can be extracted
>>>>
>>>> from the ambient background via thermal differentials.My
>>>>
>>>> line of thinking really took off back when I experimented
>>>>
>>>> with the all too familiar Peltier junction devices found in
>>>>
>>>> electronic cooling devices.Would you believe that most
>>>>
>>>> people do not understand how these devices move thermal
>>>>
>>>> energy through a current flow across a semiconductor
>>>>
>>>> junction.Historically we find that German physicist,
>>>>
>>>> Thomas Seebeck back in 1820 observed that when heat was
>>>>
>>>> applied to a junction of copper and steel wire that
>>>>
>>>> electrical energy resulted.Later in 1834 Jean Peltier
>>>>
>>>> discovered that when a direct current was applied to two
>>>>
>>>> dissimilar metals the junction got hot or cold.It was not
>>>>
>>>> until 1838 that Emil Lenz clearly showed the importance of
>>>>
>>>> both Seebeck and Peltier s discoveries by placing a drop of
>>>>
>>>> water on the junction of dissimilar metals which froze then
>>>>
>>>> melted when the polarity of the direct current was
>>>>
>>>> reversed.These discoveries remained dormant for over 100
>>>>
>>>> years because of the unavailability of semiconductor
>>>>
>>>> materials which could provide the wide temperature
>>>>
>>>> differentials.In the 1930 s semiconductor materials became
>>>>
>>>> available which revived the electric cooling principles.In
>>>>
>>>> the 1960 s many companies began building spot cooling
>>>>
>>>> devices and refrigerators based on these effects using a
>>>>
>>>> junction material of bismuth-telluride. Today more advanced
>>>>
>>>> materials are used with the basic parameters of being a pore
>>>>
>>>> thermal conductor but being an excellent electrical
>>>>
>>>> conductor. The dissimilar materials must provide a high
>>>>
>>>> coefficient of voltage temperature relationship.The first
>>>>
>>>> Peltier devices that I experimented with back about 10 years
>>>>
>>>> ago were built by Marlow Industries here in Dallas.With a
>>>>
>>>> small temperature differential across the device a weak
>>>>
>>>> current with an attendant voltage was developed.Increasing
>>>>
>>>> the differential provided a proportional increase in current
>>>>
>>>> and voltage.About 6 years ago I posted a chart of the
>>>>
>>>> wattage generated from two different size Peltier chips on
>>>>
>>>> the KeelyNet BBS.My curiosity was based on the puzzle of
>>>>
>>>> how electron flow could move thermal energy across the
>>>>
>>>> junctions and how electrical energy was produced by moving
>>>>
>>>> thermal energy across the junction.This is a directly
>>>>
>>>> reversible situation based on polarity.
>>>>
>>>> Now let us look at a very familiar parallel process used in
>>>>
>>>> refrigeration, cooling and heating devices employing phase
>>>>
>>>> change material such as water and refrigerants.We have
>>>>
>>>> always been led to believe that evaporating water provided
>>>>
>>>> cooling effects which is a mechanical process. By the same
>>>>
>>>> mechanical process we are provided heating effects by the
>>>>
>>>> condensation of a gas back to a liquid phase change.Would
>>>>
>>>> you believe that any material that undergoes a phase change
>>>>
>>>> provides an attendant electrical effect.Back in 1840
>>>>
>>>> Armstrong invented an electrostatic generator based on
>>>>
>>>> escaping steam through insulated nozzles which provided one
>>>>
>>>> of the most powerful devices of this type ever built.
>>>>
>>>> Popular belief was that this was a frictional process with
>>>>
>>>> the electrical output resulting from the steam friction
>>>>
>>>> passing through the nozzles.After reading an old (1920 s)
>>>>
>>>> Thermodynamics in Chemistry text book I realized that the
>>>>
>>>> phase change of materials was an electrical phenomenon and
>>>>
>>>> not purely mechanical.The atoms of the material lose or
>>>>
>>>> gain electrons in the process which accounts for the
>>>>
>>>> discrepancy in the energy equation when a material
>>>>
>>>> transitions between phases.More energy is present after
>>>>
>>>> the phase change back to the lower form or atomic state. The
>>>>
>>>> text book stated that this phenomenon could not be
>>>>
>>>> explained.When Jerry and I attended a Conference hosted by
>>>>
>>>> Hal Puthoff down in Austin back about 6 years ago a
>>>>
>>>> physicist from Austria presented a paper on the phase change
>>>>
>>>> of water and the attendant electrical phenomenon which is
>>>>
>>>> totally not understood by modern science.Now my suspicions
>>>>
>>>> were confirmed that phase changes of materials are an
>>>>
>>>> electrostatic phenomenon, which leads us to the fundamental
>>>>
>>>> question of, What is heat?We were told in the school
>>>>
>>>> that heat is the presence of energy and cool is the absence
>>>>
>>>> of energy.What is the form of this energy?Let us look at
>>>>
>>>> a very simple example of heating which may explain this
>>>>
>>>> process.When sunlight strikes an absorbing surface it is
>>>>
>>>> heated because electrons in the material are converted to
>>>>
>>>> photons which are emitted in the infrared band of light
>>>>
>>>> leaving the material in a net positive state or hot.The
>>>>
>>>> more electrons a material looses the hotter it becomes.Now
>>>>
>>>> the inverse situation is explored by evaporating some water
>>>>
>>>> from the surface of a material which leaves the surface in a
>>>>
>>>> net negative state or cold.Heat or cold is based on the
>>>>
>>>> ion relationship in the material.When we apply a flame
>>>>
>>>> (ionizing) to a material we cause the emission of photons
>>>>
>>>> which is basically stripping away electrons from the atomic
>>>>
>>>> structure causing a gross net positive situation to occur.
>>>>
>>>> Now we are getting a picture as to how an electric current
>>>>
>>>> across the Peltier junction can transport thermal energy
>>>>
>>>> (ions).Since the energy is in the form of presence or
>>>>
>>>> absence of electrons then it is a simple explanation as to
>>>>
>>>> how the process works.All phase change processes work the
>>>>
>>>> same way basically via ion transport and are not mechanical
>>>>
>>>> processes which we were taught.Everything in chemistry is
>>>>
>>>> an electrical or electrostatic process at the atomic level
>>>>
>>>> based on the ionized state of the atoms involved.
>>>>
>>>> At a Vangard Science Round table discussion several years ago
>>>>
>>>> we talked about the ion wind method of fire fighting in
>>>>
>>>> which ionized air will extinguish a flame because of the
>>>>
>>>> cooling effects.Now we see Patents issued based on
>>>>
>>>> negative ion spraying of a surface causing it to rapidly
>>>>
>>>> cool because it becomes net negative charged.This is a
>>>>
>>>> very efficient method of air-conditioning because an ion
>>>>
>>>> generator operates at very high voltages with very little
>>>>
>>>> current involved.It is possible to develop this ion
>>>>
>>>> transport (thermal energy) to provide direct electrical
>>>>
>>>> output from very subtle temperature differentials.Remember
>>>>
>>>> that this is a direct reversible process where a thermal
>>>>
>>>> differential will cause a development of current and voltage
>>>>
>>>> as in the Peltier device.I hope that this dialog will
>>>>
>>>> provide some food for thought out there on the KeelyNet.
>>>>
>>>> Please provide some feedback on this very interesting line
>>>>
>>>> of experimentation.Norm
>>>>
>