Re: [EVGRAY] Repulsive mode 14v 165ma [1 Attachment]

Body

Hi Warren
I did some tests and you know I have two separate coils sharing the ferrite core...one coil was meant to be the motor coil while behind it and about 4 times longer in length and wire length and ohms is what was meant to be the generator coil.
So I ran it by pulsing the motor coil and goit it up to speed then totally shorted out the generator coil and it lugs and brakes from Lenz law them reversed the coils around and pulsed the higher ohms generator coil and shorted out the lower ohms motor coil...both ways caused lugging and braking of rotor so next step is pulse ou to load or capt the coil I choose to be the generator coil and time it to be pulsed out simultaneous or delayed a bit with some overlap or delayed with no overlap amd/or multiple output pulsed timed at various points and pulsewidth I want to play around with  in relation o motor coil pulse width and finally I want to try out shortimgn the generator coil winds at various peak periods with very quick short and collect the hyper ringing into caps after running through a fwbr so I need to set up another hall and mosfet relay to start next round of xperiments.
Kone