Re: [EVGRAY] Dual rotor motor running on 500ma [1 Attachment]

Body

Hi Mick
Maybe not so amazing as could be too heavy of pulse width but at least draw does not go up horribly  as is usual with electric motors when you load shaft down heavily.
I am timing pulses off the rotor magnets I will suspect making small trigger disc on shaft with16 small magnets for pulse width half as long will get draw down to under 100ma but also make for much weaker shaft power and braking shaft with hand now will raise draw but I could be wrong and draw drops still...what this idesigned for is shared core with both motor and generator winds and the generator winds need to be pulsed out into load at the same time or delayed a bit or maybe 90 degrees off I don't know in compared to the motor coil pulse...i would like to have much shorter pulse width to the motor winds as compared to the generator winds output....maybe there should be a bit of overlap to the input and output too we will see...nayways I need to install 2nd hall effect and mosfet relay and begin some experiments...this motor does have very.good shaft power at least so far .. so seems having the coils and cores react to rotor magnets at each end does seem to double shaft power with same impulse to coil
Kone