Body
Hi NormYup! Those wind turbines sure are ugly suckers to look at over the landscape.I'm glad my neighbours don't subscribe to them.At least solar panels are less intrusively ugly.Ainslie's circuit needs a review.Aaron had good luck with it, and did a nice clear video.The negative spike harvest of the differential seems interesting, as we keep running across it again, and again.Cheers Warren
Sent from Yahoo Mail on Android
On Sun, 11 Nov 2018 at 6:05 AM, Norman Wootan [email protected] [EVGRAY]<[email protected]> wrote:
Warren! I was really interested in the Ainslie Theory but had no success with it! What I find interesting is the huge investment in the wind turbine Industry. (Going after big Government $ grants). My son is an AUV Engineer doing the ocean floor Geophysical work for locating the foundation spots for these turbines. They completed the Martha Vinyard site last year and now are working out of Elizabeth City, NJ doing foundations for 250 turbines in the NYC harbor sound! I see a lot of totally abandoned wind turbines around the world just gathering dust since it is too expensive to tear down and remove them????
On 11/8/2018 7:43 AM, Warren Keillor [email protected] [EVGRAY] wrote:
Norman
For my part, in my thinking, Rosemary Ainslie, a physicist, at a university in South Africa, has a nice little circuit she has made to prove her theory. It has been replicated by several experimenters, as there are plenty of youtube videos, a few, full of nasty muck raking bullshit, for some reason. I have spoken with her on the phone, and in emails over the years. She is the real deal, a modest, and straight forward scientist, giving her work to the World. It is a little circuit that makes 17 X the input electricity as resistance heat. I have purchased the transistors she has been using, a somewhat obscure, almost obsolete product. I got mine from Texas. If I am able to get it going, a little later as the ow flies, here in Canada, I want to feed the product into the electric hot water heater, that at present, is only used as a header tank for the heat pump system. It uses 220 volts, and has resistance elements. What the hell,
Sent from Yahoo Mail on Android
On Thu, 8 Nov 2018 at 6:29 AM, Norman Wootan [email protected] [EVGRAY] <[email protected]> wrote:
Jakob Wall, maybe the Old Tried and Tested over time wood gas technology would be best for you! Very simple and I built one to run a 5KW generator and it worked . This technology has been around since civilization first saw an underground coal seam burning without atmospheric oxygen. The burning coal converts ground water into carbon monoxide and hydrogen and is self sustaining for many years. Start by reading the history and applications. https://en.m.wikipedia.org/wiki/Wood_gas_generator
http://www.edina.eu/gas-generators/applications/non-conventional-gas/syngas/
See: attachment!
During the development of my Hydrogen Vortex Reactor, I questioned the academic answer as to temperature that water vapor would break down into hydrogen and oxygen. After talking to a lot of very experienced fire fighters, the consensus was that if you spray water into a fire that is visibly WHITE HOT, the water will exacerbate the situation because you have entered the region of threshold dissociation of water vapor into hydrogen. Think about how an ordinary magnesium flare can burn underwater. Simple fact is that the magnesium burns so hot that the flame is self sustaining from the water. Happy building! Jakob. BTW! I build a wood gas generator from a heavy duty clamp top type 55 gal steel drum lined with fire brick and used leaves straw and wood chips as fuel feed stock. A water ash scrubber stage will give you clean syn-gas to run your generator.
On 11/7/2018 5:57 PM, James Glinski [email protected] [EVGRAY] wrote:
Bingo fuel is a good way to run a motor but the carbon rods you either have to buy them or make them to make the get any carbon source to make biochar once made grind up dry and add molasses to make past fill tube like copper or steel heat to red hot and aply 500 volts till cool .experimenting is nessary to get the voltage lower and the set up just right ...found information in a very old patent .but if you persevere you got it .now the problem is a constant cheap Carbon source ..dryed grass clippings to old wood pallets .no ash as in gasogen .clean and you can use them for electrodes or welding rods for cutting steel of a extream spot light like in concentration camps .
On Wednesday, November 7, 2018, Jakob Wall [email protected] [EVGRAY] <[email protected]> wrote:
Thanks guys, some of that looks feasible.
------------------------------ --------------
On Wed, 11/7/18, Mick [email protected] [EVGRAY] <[email protected]> wrote:
Subject: Re: Fwd: Fwd: Re: [EVGRAY] Norm's Magnetic Battery [2 Attachments]
To: [email protected]
Received: Wednesday, November 7, Jakob,
You may also have a look at this as it's a less
complex version
incorporating a couple of Norms findings allegedly
allowing for
enough power to run internal combustion engines from
water and a
carbon arc. The name is funny as it's a pun from
the lexicon of a
pilot one never wants to hear from the cockpit. If
the pilot says
bingofuel to ATC that means he thinks he may have just
enough fuel
to the drop to land the plane so clear me for a runway
and get the
emergency crews there.
http://bingofuel.online.fr/ bingofuel/html/bfr10.htm
On 11/7/2018 4:15 AM,
Norman Wootan
[email protected]
[EVGRAY] wrote:
On
11/7/2018 6:06 AM, Norman
Wootan wrote:
Jakob Wall! & all other researchers on
here need to
read the Whole Story as to why I no longer
have a
research lab. Jakob, I'm sorry I did
not reveal to you
the BEST in my opinion of methods of
producing hydrogen
gas for I felt it was a little too advanced
and
difficult for you to experiment with. See:
https://patents.google.com/ patent/US7097676B2/en
. There is a very long story behind this
US Patent and
a hell of a lot of research. The quest for a
very
inexpensive method of splitting water has
been the Holy
Grail of cheap energy. In addition to
the research
papers and links that I gave to you, here
are some more
to dwell on.
https://www.researchgate.net/post/At_what_temperature_ water_will_decompose_to_ Oxygen_and_Hydrogen
https://www.quora.com/Does-water-break-down-into-oxygen- and-hydrogen-at-high- temperatures-If-so-then-at- what-temperature
https://www.quora.com/How-much-water-can-you-split-into- hydrogen-and-oxygen-using- electrolysis-with-one- kilowatt-hour-of-electricity
http://www.redrok.com/ hion96a1.htm
https://www.nature.com/ articles/nplants201741
Please read carefully about the play of
Nickel in this
approach!
https://en.m.wikipedia.org/ wiki/Water_splitting
https://en.m.wikipedia.org/wiki/Water-gas_shift_reaction
I owned 77 acres of land in Eureka Springs,
AR where
they still had the old water gas generator
and gas
storage facility.
https://en.m.wikipedia.org/ wiki/Decarboxylation
https://phys.org/news/2018-02-uncovers-mechanism-water- splitting-catalyst.html
https://www. scientificamerican.com/article/new-catalyst-could- split-water-cheaply/
https://www.technologyreview.com/s/512996/a-cheaper-way-to- make-hydrogen-from-water/
"SUPER STEAM - A Tesla
conference in Colorado
surfaces new Super Steam Technology (SST).
Leonard
Dorsett and friends from Texas share
strikingly similar
views to Aquarian Agency Ltd. They have
technology which
produces steam instantly at up to 3,000F
without a
boiler and with 60% savings in fuel over
traditional
boilers. Nitrogen rich, it can put out
gasoline fires
and treat many waste problems. Of major
importance to
Aquarian, this nitrogen-rich steam will help
to produce
heat and Aquastone at considerable
savings."
For further information on Aquarian Agency
Ltd. they can
be contacted at 38 Weir Rd, Wimbledon,
London SW19 SUG,
England or on Internet at <aquarian
ocign.ape.org>. SUPER STEAM
TECHNOLOGY PART 2
Leonard Dorsett (PO Box 365, Grapevine, TX
76092)
demonstrated his Super Steam Technology at
the 1994
International Tesla Symposium. SST is a
system for
producing steam at any temperature or
pressure
independently and instantly without the need
for a
conventional boiler. It can instantly
produce steam of
any temperature from hot water at 180F to
super heated
steam at over 3000F, while pressures can
vary from 1PSI
to 3000PSI with airflow volumes of 1CFM up
to over
2000CFM. The system operates on propane,
methane,
petrol, kerosene, methanol, diesel, hydrogen
or just
about anything else that bums and converts
virtually
100% of the fuel into usable energy. (Note:
The person
in the picture is Norman Wootan of MRA
fame)
This all sounds great, but how does it work?
The basis
of the unit is a specially designed open
throat chamber
with controlled air, water and fuel
interaction and a
high voltage ignition resulting in a direct
fire process
establishing thermal zones. This creates a
stoichiometric condition resulting in a full
spectrum of
steam product. Now comes the interesting
part At the
increased temperatures of steam,
disassociation occurs.
(Could this be a clue to running cars on
water??) The
hydrogen and oxygen reacts causing an
exponential
increase of energy resulting in super heated
steam. A
similar superheat process was addressed by
Tesla in the
October 12, 1911 publication of the
"Engineering News
Record".
Applications of the SST system include a
much more
economical way of producing electricity as
no
conventional boiler is needed. It will also
be an ideal
low cost method for heating and cooling
homes and
businesses. Small portable units can be
developed for
home use, such as steam cleaning, and insect
and ant
removal, without the dangers of
insecticides. The system
can also be used for low cost purification
of polluted
water or sewerage and can also convert salt
water into
drinking water both quickly and
inexpensively. Other
uses are in fire fighting applications, ice
and snow
removal from roads, etc. and sterilization
and nurturing
of soil for agriculture where contamination
has
occurred.
I had designed a method of making hydrogen
from carbon
& water vapor using the Tesla Atomic
Bombardment
method of high frequency inside of spherical
inclosure
like this experiments with the carbon button
lamp
globes. After working with Leonard
Dorsett and his
Super Steam Project, I chose to use the
Water Shift
Process instead. A side note is needed
here! The Super
Steam Process was a result of Professor
Brown studying
the method the German's used for torpedo
propulsion from
WWI. Acetylene Gas and sea water produced
an exothermic
reaction generating Super Steam. Brown built
several
reactors and tested them in the Tulsa area
to break
(down hole) the parafin deposits to release
crude oil.
The Chemical equation for the reaction in
the US
Patent: https://patents.google.com/ patent/US7097676B2/en
(6C
+ 12 H2O = 6CO2 + 24H)
Hydrogen
Reactor Development
Original
concept design was a high
voltage, high frequency resonant device that
utilized
carbon water reaction with the feedstock
being in the
form of graphite rod stock.
This unit was
designed for vehicle application and had too
many
limitations to be used for mass hydrogen
generation.
This type reactor is very effective
at hydrogen
production since it targets the water vapor
molecule at
MRI frequencies, which breaks the bonding,
allowing the
carbon to latch onto the oxygen atoms
leaving the
hydrogen free. This device was a closed
system that used
a simple CO2/hydrogen separation stage that
enabled the
hydrogen to be feed to an internal
combustion engine.
To
allow for a sustained high mass flow of
hydrogen gas
output, reactor design took on a radical
change.
By incorporating the
Ranque/Hilsch, Counter
Flow Implosion Vortex Principle, and
continuous high
mass flow and gas separation were
achieved in one
stage of operation.
Feedstock for
this type reactor could be any
carbon-based material
that could be put into a powder
form. Highest
carbon content of the feedstock provides
for the
most efficient hydrogen production with
the least
undesirable output
material.
Super
high temperature operating regime was
chosen to be
above 2500 C for the purpose of
producing atomic
hydrogen in the process.
The original
reactor operated at temperatures that
easily
gasified basic carbon into a plasma
state
(>10,000 F) more easily allowing the
production
of hydrogen from the stoichiometric feed
stock
ratios.
I sold one of my Patents (Sonodiffuser) and
paid for my
52 acres of land and built a 5200 sq. Ft.
lab the do the
Prototype machining and Proof of Concept
testing for
GAZPROM, Moscow in 2005. A $1.2 million
investment and
they got the rights to the process and I got
the
beautiful Research Lab all paid in full. I
was a self
employed Contractor in Dallas working with
HVAC,
Electrical and Electronics Maintenance so
had to commute
170 miles/day and only had the week ends for
my time!
Having to mow grass and maintane the 52
acres took all
my time and when I suffered a neck fracture
in 2012, had
to retire. Liquidated the entire facility
and sold it
off. Moved to Dallas then to South Louisiana
where I now
do a lot of relaxing and fishing!
Hector and ALL, I did my time in the Barrel
so now I
will just contribute to the dialog inorder
to assist any
research you may be doing within my area of
experitise! BTW! I have been out to
pasture for a
long time now, so no BULL offense! As
Hector knows, "It
fits"! Lol
Yes! Hector, I will wear my Border Patrol
Hat when you
come visit from PR! Lol
On
11/6/2018 8:52 PM, [email protected]
[EVGRAY] wrote:
By the way ... i can hit mega millions
or the power
ball . i never will not have a lab i
can work in,
that is worst than death , you have no
idea of the
technology that had being lost by the
greedy fucking
bastards fucking my life , they will
loose all they
have "soon" because it had
being engineered that
way by accumulative bad karma, i have
another lab
they will never reach or be able to
intercept or
destroy and that will decide their fate
..... they
will be fucked hard !
(H)
---In [email protected],
<mkjekyll@...>
wrote :
Cmon Hector,
Bad taste!
The man had a more serious lab than
anyone else
here and his work speaks for itself.
Maybe he has
gained the fortune he desired through
R&D and
now shitting in tall cotton or gone
fishing
reaping the rewards of retirement.
Notwithstanding
is still kind enough to help point us
in the right
directions around here.
"Funny–I
can look back on a life
of
achievement, on
challenges met,
competitors bested,
obstacles
overcome. I’ve
accomplished more
than most men, and
without the use
of my legs. What?What
makes a man,
Mr.
Lebowski?"
On
11/6/2018 8:04 AM, arkresearch@...
[EVGRAY] wrote:
Dar n ! a Scientist inventor
with no lab
is like a breeding bull with
no balls !
---In [email protected],
<nwootan@...>
wrote :
Jacob! You asked me a
question and I
gave you my opinion!
I'm totally
retired at 80 years old
and have no
lab to experiment in!
Your quote; I
heard once a phrase from a
researcher
who said. '' Slow
down boy, we get
paid for llooking for
solutions, not
to find
them!'' That certainly does
not apply to me for I have
shared all
with the folks on this
site. I find
you statement very
interesting:
Technics that use up 10 %
of a magnet
in 24 hours with usual
amount of gas
looks to me extremely
inefficient.
?????? Care
to share where you
saw the power of a
permanent magnet
being used up! We all
here on this
site share what ever
knowledge we have
on the various subjects
not seeking
any monetary gain in any
way! That is
my approach! I just
contribute to
the dialog when I run
across something
interesting and think it
will assist
you guys! Norm
On
11/3/2018 11:32 PM, Jakob
Wall wall_jakob@...
[EVGRAY] wrote:
Thanks Norman,
But i actually
asced for
''most
efficient way'' to
split water known
to you!
I realize there
are a lot of
different
technigues to do
just that.
And yes i realize
you could
give me a rather
complex
answer. But
instead i hope for
a
rather easy and
reproductive
answer since i am
looking
forward to solve
my enerrgy
problems i just
can not live
with the momentary
(sad and
very stupid energy
situation)
I am still not
giving up
becouse of a
couple mistakes
and
misunderstandings.
If i would be a
car dealer and
you would ask me
for a most
efficient car
available on the
market
i would for sure
not recommend
a Prius, since
there are a lot
of cars with
better fuel
economie
even without being
a hybrid
and without
additional cost
like
batterys,e-motors and a
bunch added
ECU's
Technics that use
up 10 % of a
magnet in 24 hours
with usual
amount of gas
looks to me
extremely
inefficient.
Also very
expensive HHO-Garage
products with
output of 1,6
ltr/min.
Come on, 6 rusty
nails and a
old car batery
does this job,
no need to spend
1600 bucks on
it.
I honestly
expected solide
advise or a honest
NO way boy,
i just talking
around.
I heard once a
phrase from a
researcher who
said. '' Slow
down boy, we get
paid for
llooking for
solutions, not to
find them!''
That shoked me
deeply and even
if i get 150 years
old, i will
not forget it.
Thats true treason
on mankind
and deciving the
people. I
really hope nobody
on this
forum only care
about what he/she
will be
doing tomorrow.
Jakob
------------------------------ --------------
On Sun, 10/28/18,
Norman
Wootan nwootan@...
[EVGRAY] <[email protected]>
wrote:
Subject: Re: Fwd:
Fwd: Re:
[EVGRAY]
Norm's Magnetic
Battery
To: [email protected],
"Bert
Pool" <BertPool512@...>,
"Bob
Paddock" <bob.paddock@...>,
"joel
mcclain" <joel_76670@...>,
"Jon
Gentry" <jongen422@...>,
"Mbking42" <mbking42@...>,
"Toby
Grotz" <wireless2@...>,
"Phil
Rembold" <prembold@...>,
"Angel
Alvarez" <angel@...>,
"Fredric
Fletcher" <ffletcher@...>
Received: Sunday,
October 28,
2018, 9:44 AM
Jacob! That
would be a rather
complex answer
but here is
your
starting point!
https://kundoc.com/pdf-direct-thermomagnetic-splitting-of- water-.html
After having been
heavily
involved in the
COLD FUSION
Research
back in the 70s
and 80s I
quickly settled
o0n the best
catalyst in
electrolytic cells
which is
pure nickel. I
still have
the cell
used in the
Elemental
Replication
experiments.
http://www.rexresearch.com/ gunnrman/gunnrman.htm
The hidden
part of this
research is the
use of a nickel
component
in the
combustion
chamber. Bosch
developed 90,000V
ignition
systems to
enable water
injection in gas
engine which
high
lighted the
Graneau HV
decomposition of
water via HVDC
discharge!
My magnetic
Battery when run
as an electrolytic
cell
to produce
hydrogen does
produce a huge
amount of hydrogen
gas as
shown by
the Dr. Ehrenhaft
document. I
would tell you
to
pursue the
super
high Tesla
magnetic flux and
nickel electrodes
in an
electrolytic
cell. The major
obstacle to
be overcome is the
rapid
collection
of ions from
solution by the
1.3 Tesla flux
across a
.020"
mechanical gap
which quickly
takes the cell
into a
super-conduction
mode which
takes out the
driving DC
power supply.
You can flush the
magnetic
gaps with
distilled water
and the gaps
will show in the
meg-ohm range
then go to zero
ohms
after a short
period of running,
the
gathered ions
totally short
cell. During
the brief runs
there is a huge
amount of hydrogen
gas
produced
which I burned off
as it was
generated. Much
can be
said about
driving the cell
with high
frequencies as the
Myers
research
showed. Our
friend up in
Canada at George
Wiseman,
Eagle Research
is running well
ahead of the
crowd on the
production
of H-H-O.
Just for
giggles!
16 October
1996
To: Hal
Fox, Fusion
Facts
Elemental
Replication ?
Around
mid
September
I put together
an
electrolysis cell
similar to
the Miles Nickel
Cold
Fusion Cell
with the goal
of
exploring the
possibilities of
making what is
termed
“Pristine
Water”. This
water
which will be used
by
Homeopaths
will have had all
memory or
information
removed. This is
accomplished
by
recombining
monatomic
hydrogen and
monatomic oxygen
as generated in
a
properly
designed cell.
This is
the ultimate in
purity since
this is
water with
conditions at the
time of
original
creation.
“Holly Water”is a
term
coined by my
dear
friend and fellow
researcher
Joe Tyls of
Vancouver, BC.
After several
weeks of
successful
operation
producing water
that had all
the earmarks of
a
true
“pristine
water” a
fellow
researcher
suggested using an
alternate
electrolyte. A
solution was
selected
that contained
77
colloidal minerals
as found in
plants that are
the
easiest
assimilated into
the
body. With
the
electrolyte
changed the
cell was put back
into
operation as
before with a
nice
recombination burn
and
production of the
sought after
“pristine
water”.
After about
an
hour of
operation the
cell
went absolutely
“nuts” with
the temperature
rapidly
climbing
to boiling
point
and the current
out of sight.
When the
cell was opened we
found a
deep red sludge
deposit
which
shorted the
cell
plates. Our
first
thought was that
the
electrolytic
action
precipitated out
the colloidal
minerals
which caused
the
deposit found.
The
electrolyte was
allowed
to settle out
the
precipitate.
After
decanting off,
the clear
electrolyte
was
returned to the
cell for another
run. Again
the cell
operated
normally for
about an hour with
a
normal
recombination burn and
recovery of the
water being
consumed by the
cell
in the splitting
action.
Again
the cell
temperature and
current
mirrored the
first
run.
Again the cell
contained the
same amount of
sludge
residue. This
process
was repeated ten
(10) times
with exactly the
same
results.
All of
the sludge was
carefully dried
and weighed on
an
electronic
scale with a
five
decimal
resolution.
The cell plates
and all
hardware were
weighed to
determine any loss
of
mass that may
contribute to
the mass gain
observed
in the
sludge. Five
hundred
(500) ml of the
original
electrolyte
solution used in
the cell was
vacuum
distilled to
determine the
exact mass of
colloidal
minerals
contained.
When all factors
were
considered we
came
out with a
mass gain of 48
gm
which cannot be
explained by
conventional
electrolysis.
After
talking
to Dr.
Robert Bass and
Hal
Fox I learned of a
patent that
has been filed
on
the
transmutation of
elements
in the cold fusion
cell which
is the process
that
Dr. John
Bockris has been
so
active in.
Both Dr.
Bass and Hal
Fox
stated that what I
was
observing is not
the same
as the
transmutation
observed
in the cold fusion
cell since
I have a
overall
mass gain and
not a lateral
movement of
elements in the
periodic table
toward
lighter
elements with a
resulting heat
release. This
unusual
cell operation has
caused
quite a reaction
in the
scientific
community. At
this
time I have built
a complete
new cell
with every
possible factor
which could
possibly
explain the
mass gain
considered and
documented.
The
ten (10)
consecutive runs
on the new
cell will be
completed
soon and a
report will be
forthcoming.
What is
interesting
about
this phenomenon is
that when
an eleventh run
was
made with the
original
electrolyte
exactly the same
amount of residue
was
recovered
as in the
previous
ten
runs.
Since
the same
electrolyte is reused
each time with
only
distilled
water being
added
to replace the
volume lost by
the removal of
the
solids and
the water
recovered
by the
recombination burn we
are hard pressed
to
explain the
observed
phenomenon. The
electrolyte
appears
stronger in
mineral
concentration and
shows no
sign of
depletion.
After
conferring
with
Joe Tyls we
arrived at
the conclusion
that the 77
colloidal
minerals
contained in
the
electrolyte
provide the atomic
templates
needed for the
monatomic
hydrogen
(father of all
the elements) to
replicate
selected elements
in
this exotic
mixture. If
you
subscribe to the
theories of
the late
Walter Russell and
his
explanation of the
octave
based
periodic table
with
monatonic hydrogen
being what
he describes as
hydrons
(precursor to
hydrogen)
then it is
possible for the
replication of
elements
directly
from energy
input
alone. This is
how all
matter was
created in the
beginning as
described by
Schappeller in
“The
Physics of the
Primary State of
Matter”. I
will keep
all informed as to
our
progress and
findings in
this very
intriguing
venture.
Norman
Wootan
P.O.
Box 141049
Dallas,
TX 75214
(214)
360-0865
CC: Gene
Mallove,
Infinite
Energy
CC: Dr. John
Bockris, Texas
A/M
On 10/28/2018 1:01
AM,
Jakob Wall
wall_jakob@...
[EVGRAY] wrote:
Thanks Norman,
BTW, what is the
most
effective water
split
device that
you ever put you
hands on?
As HHO researcher
for dekades
you should be
able to point
us directly to the
most
effective
known!
Please be specific
about
reconstruction of
the
same, since
we are in public
domain it
will become
public
knowledge
and public good. I
assume you
intend nothing
else,rigth ?
------------------------------ --------------
On Sat, 10/27/18,
Norman
Wootan nwootan@...
[EVGRAY]
<[email protected]>
wrote:
Subject: Re: Fwd:
Fwd: Re:
[EVGRAY]
Norm's
Magnetic
Battery [3
Attachments]
To: "Bert
Pool" <BertPool512@...>,
"Bob
Paddock" <bob.paddock@....>,
"joel
mcclain"
<joel_76670@...>,
"Jon
Gentry"
<jongen422@...>,
"Lane
Wootan"
<lanewootan@...>,
"Mbking42"
<mbking42@...>,
"Toby
Grotz"
<wireless2@...>,
"Phil
Rembold"
<prembold@...>,
"Angel
Alvarez"
<angel@...>,
"Fredric
Fletcher"
<ffletcher@...>,
[email protected]
To understand the
unwinding of
a thread
leading
to Magnetic
Generating
Hydrogen and this
Magnetic
Battery,
we have
to dust off
our 9th grade
Chemistry
Books!
http://www.rexresearch.com/ ehrenhaf/ehrenhaf.htm
I guess Dr.
Ehrenhaft was the
first to
propose a
Magnetic
Current.
(Jon
Gentry, Your
liquid metal
vortex helix).
https://revolution-green.com/can-electrolysis-powered- magnets/
Ah! Ha! more on
Magnetic
Currents!!!
https://sciencing.com/magnetic-properties-hydrogen- 7648446.html
https://www.labmanager.com/white-papers-and-application- notes/2010/05/resistivity- conductivity-measurement-of-purified-water#.W9So9uJRc2w
https://www.askiitians.com/forums/Physical-Chemistry/19/ 19074/electro-che
https://en.m.wikipedia.org/ wiki/Overpotential
https://www.quora.com/Why-is-oxygen-molecule-paramagnetic- although-it-does-not-contain- any-unpaired-electron
https://www.researchgate.net/publication/251580541_The_ effect_of_magnetic_force_on_ hydrogen_production_ efficiency_in_water_ electrolysis
http://www.physicscentral.com/experiment/physicsathome/ electricwhirlpool.cfm
http://www.linux-host.org/ energy/bmagpump.htm
Now Jon Gentry you
have your
liquid metal
pump
so
that you can
make the helix
tube Vortex!
Ferricpetacarbonyl
or
micro fine neo
powder to provide
the liquid
metal for pump
circuit.
Lots of reading
here!
Please think
about the
ramifications
of
a Magnetic Current
as proposed
by Dr.
Ehrenhaft
Posted by: Jakob Wall <[email protected]>
| Reply via web post | • | Reply to sender | • | Reply to group | • | Start a New Topic | • | Messages in this topic (22) |
Check out the automatic photo album with 16 photo(s) from this topic.
#yiv6953911912 #yiv6953911912 -- #yiv6953911912ygrp-mkp {border:1px solid #d8d8d8;font-family:Arial;margin:10px 0;padding:0 10px;}#yiv6953911912 #yiv6953911912ygrp-mkp hr {border:1px solid #d8d8d8;}#yiv6953911912 #yiv6953911912ygrp-mkp #yiv6953911912hd {color:#628c2a;font-size:85%;font-weight:700;line-height:122%;margin:10px 0;}#yiv6953911912 #yiv6953911912ygrp-mkp #yiv6953911912ads {margin-bottom:10px;}#yiv6953911912 #yiv6953911912ygrp-mkp .yiv6953911912ad {padding:0 0;}#yiv6953911912 #yiv6953911912ygrp-mkp .yiv6953911912ad p {margin:0;}#yiv6953911912 #yiv6953911912ygrp-mkp .yiv6953911912ad a {color:#0000ff;text-decoration:none;}#yiv6953911912 #yiv6953911912ygrp-sponsor #yiv6953911912ygrp-lc {font-family:Arial;}#yiv6953911912 #yiv6953911912ygrp-sponsor #yiv6953911912ygrp-lc #yiv6953911912hd {margin:10px 0px;font-weight:700;font-size:78%;line-height:122%;}#yiv6953911912 #yiv6953911912ygrp-sponsor #yiv6953911912ygrp-lc .yiv6953911912ad {margin-bottom:10px;padding:0 0;}#yiv6953911912 #yiv6953911912actions {font-family:Verdana;font-size:11px;padding:10px 0;}#yiv6953911912 #yiv6953911912activity {background-color:#e0ecee;float:left;font-family:Verdana;font-size:10px;padding:10px;}#yiv6953911912 #yiv6953911912activity span {font-weight:700;}#yiv6953911912 #yiv6953911912activity span:first-child {text-transform:uppercase;}#yiv6953911912 #yiv6953911912activity span a {color:#5085b6;text-decoration:none;}#yiv6953911912 #yiv6953911912activity span span {color:#ff7900;}#yiv6953911912 #yiv6953911912activity span .yiv6953911912underline {text-decoration:underline;}#yiv6953911912 .yiv6953911912attach {clear:both;display:table;font-family:Arial;font-size:12px;padding:10px 0;width:400px;}#yiv6953911912 .yiv6953911912attach div a {text-decoration:none;}#yiv6953911912 .yiv6953911912attach img {border:none;padding-right:5px;}#yiv6953911912 .yiv6953911912attach label {display:block;margin-bottom:5px;}#yiv6953911912 .yiv6953911912attach label a {text-decoration:none;}#yiv6953911912 blockquote {margin:0 0 0 4px;}#yiv6953911912 .yiv6953911912bold {font-family:Arial;font-size:13px;font-weight:700;}#yiv6953911912 .yiv6953911912bold a {text-decoration:none;}#yiv6953911912 dd.yiv6953911912last p a {font-family:Verdana;font-weight:700;}#yiv6953911912 dd.yiv6953911912last p span {margin-right:10px;font-family:Verdana;font-weight:700;}#yiv6953911912 dd.yiv6953911912last p span.yiv6953911912yshortcuts {margin-right:0;}#yiv6953911912 div.yiv6953911912attach-table div div a {text-decoration:none;}#yiv6953911912 div.yiv6953911912attach-table {width:400px;}#yiv6953911912 div.yiv6953911912file-title a, #yiv6953911912 div.yiv6953911912file-title a:active, #yiv6953911912 div.yiv6953911912file-title a:hover, #yiv6953911912 div.yiv6953911912file-title a:visited {text-decoration:none;}#yiv6953911912 div.yiv6953911912photo-title a, #yiv6953911912 div.yiv6953911912photo-title a:active, #yiv6953911912 div.yiv6953911912photo-title a:hover, #yiv6953911912 div.yiv6953911912photo-title a:visited {text-decoration:none;}#yiv6953911912 div#yiv6953911912ygrp-mlmsg #yiv6953911912ygrp-msg p a span.yiv6953911912yshortcuts {font-family:Verdana;font-size:10px;font-weight:normal;}#yiv6953911912 .yiv6953911912green {color:#628c2a;}#yiv6953911912 .yiv6953911912MsoNormal {margin:0 0 0 0;}#yiv6953911912 o {font-size:0;}#yiv6953911912 #yiv6953911912photos div {float:left;width:72px;}#yiv6953911912 #yiv6953911912photos div div {border:1px solid #666666;min-height:62px;overflow:hidden;width:62px;}#yiv6953911912 #yiv6953911912photos div label {color:#666666;font-size:10px;overflow:hidden;text-align:center;white-space:nowrap;width:64px;}#yiv6953911912 #yiv6953911912reco-category {font-size:77%;}#yiv6953911912 #yiv6953911912reco-desc {font-size:77%;}#yiv6953911912 .yiv6953911912replbq {margin:4px;}#yiv6953911912 #yiv6953911912ygrp-actbar div a:first-child {margin-right:2px;padding-right:5px;}#yiv6953911912 #yiv6953911912ygrp-mlmsg {font-size:13px;font-family:Arial, helvetica, clean, sans-serif;}#yiv6953911912 #yiv6953911912ygrp-mlmsg table {font-size:inherit;font:100%;}#yiv6953911912 #yiv6953911912ygrp-mlmsg select, #yiv6953911912 input, #yiv6953911912 textarea {font:99% Arial, Helvetica, clean, sans-serif;}#yiv6953911912 #yiv6953911912ygrp-mlmsg pre, #yiv6953911912 code {font:115% monospace;}#yiv6953911912 #yiv6953911912ygrp-mlmsg * {line-height:1.22em;}#yiv6953911912 #yiv6953911912ygrp-mlmsg #yiv6953911912logo {padding-bottom:10px;}#yiv6953911912 #yiv6953911912ygrp-msg p a {font-family:Verdana;}#yiv6953911912 #yiv6953911912ygrp-msg p#yiv6953911912attach-count span {color:#1E66AE;font-weight:700;}#yiv6953911912 #yiv6953911912ygrp-reco #yiv6953911912reco-head {color:#ff7900;font-weight:700;}#yiv6953911912 #yiv6953911912ygrp-reco {margin-bottom:20px;padding:0px;}#yiv6953911912 #yiv6953911912ygrp-sponsor #yiv6953911912ov li a {font-size:130%;text-decoration:none;}#yiv6953911912 #yiv6953911912ygrp-sponsor #yiv6953911912ov li {font-size:77%;list-style-type:square;padding:6px 0;}#yiv6953911912 #yiv6953911912ygrp-sponsor #yiv6953911912ov ul {margin:0;padding:0 0 0 8px;}#yiv6953911912 #yiv6953911912ygrp-text {font-family:Georgia;}#yiv6953911912 #yiv6953911912ygrp-text p {margin:0 0 1em 0;}#yiv6953911912 #yiv6953911912ygrp-text tt {font-size:120%;}#yiv6953911912 #yiv6953911912ygrp-vital ul li:last-child {border-right:none !important;}#yiv6953911912