Re: [EVGRAY] Re: Reguaging a pancake coil

Body

James,

A CB does not transmit longitudinal modulated waves as do Tesla spark
gap devices. One will be missing the pumping action with regular crystal
controlled AM without some mods.  There is a reason why so many
replications of Tesla don't work and that is people substitute modern parts.


On 9/29/2018 7:40 PM, James Glinski [email protected] [EVGRAY] wrote:
>  
>
> Well from what I've seen lately it's kind of simple to replicate
> .Tesla tower in miniature and it works with the counter clockwise
> coil.two matching coils pancake and a radio wave source ...and some
> thing to wave form it .I was thinking a cheap 27 Chanel citizens band
> radio they have crystal frequency control .at about 4 Watts .if the
> replicators are right you can get from 5 to 10 times back .there's
> really nothing much there but two coils a ball covered in foil and a
> radio source . just looking for now .
>
> On Saturday, September 29, 2018, Mick [email protected]
> <mailto:[email protected]> [EVGRAY] <[email protected]
> <mailto:[email protected]>> wrote:
>
>      
>
>     James,
>
>     Don Smith had some very strange ideas such as the counter wound
>     one amp the other volts.  I certainly do not get this reasoning
>     but again may be missing something.  Counterwinding coils would
>     create a phase change and depending on when they are switched
>     wavelength etc other aspects.  One can create a phased modulation
>     like the EH antenna or collapse the E component but clockwise
>     volts counterclock amps I have a mental disconnect on that claim. 
>     I would love to know if he has substance behind this claim or hot air.
>
>
>     On 9/29/2018 7:14 PM, James Glinski [email protected]
>     <mailto:[email protected]> [EVGRAY] wrote:
>>      
>>
>>     I don't know if this is of help but recently I've  noticed that
>>     with Tesla and two other people who replicated his work making
>>     miniatures of his towers that the receiving coil is counter
>>     clockwise .which I' don't think don Smith showed .excel with the
>>     CW ccw recever one for amps one for volts .but in general nope
>>     ..everything else seems the same as Tesla .what's up with that
>>     ?.a trip up for the public ?.
>>
>>     On Saturday, September 29, 2018, Mick [email protected]
>>     <mailto:[email protected]> [EVGRAY] <[email protected]
>>     <mailto:[email protected]>> wrote:
>>
>>          
>>
>>         Norm,
>>
>>         Wish I had known you then, would have come out for a visit. 
>>         Those caps how amazing.
>>
>>         Did you try earthing the high voltage negative pulses and
>>         check for a mirror charge in positive?
>>
>>         As far as your understanding of the experiment do the little
>>         batteries work based on that adjustable top load ball he had
>>         about 80 or so feet up?
>>
>>         Was the magnet part strictly electromagnet or a perm magnet
>>         wrapped into a hybrid perm-electromagnet?
>>
>>         My thoughts wold be strictly electromagnet based on how
>>         magnets are made now, but not sure...
>>
>>
>>         On 9/29/2018 4:30 PM, Norman Wootan [email protected]
>>         <mailto:[email protected]> [EVGRAY] wrote:
>>>          
>>>
>>>         Although I have two copies of the Colorado Springs Notes, it
>>>         was unfortunate that I did not find Page 25 info till 2012. 
>>>         In 2012 I had liquidated the Lab and sole off my 52 acre
>>>         Research Farm and moved back into Dallas.
>>>
>>>
>>>         Around 2004, I built Tesla's Disrupter Transformer and
>>>         Re-worked on of my X-ray supply pot (60KV) by switching the
>>>         diode array so that the the anode output was now negative
>>>         output instead of positive to be used  to drive the disrupt
>>>         coil. I had a HVDC negative power supply at 60KV.  I had a
>>>         bank of capacitors to charge using the HVDC supply.  I used
>>>         a large DC long throw HV relay which I could fire at various
>>>         pulse rates via mechanical insulated actuator.  The 60KV
>>>         caps came out of SLAC, Stanford Linear Accelerator Complex
>>>         and  I managed to get 60 of them at 2.5 MFD ea. I was
>>>         discharging about 5 killo-Joules per pulse.  The re-charge
>>>         time of the cap bank dictated the rate of firing.   By
>>>         discharging the caps through the very powerful magnetic horn
>>>         gap I got that unidirectional pure negative DC discharge
>>>         which was a blue white fire and gave the physical shock wave
>>>         that Tesla described in his experiments. Was an interesting
>>>         experiment. I just wish I had found the page 25 info while I
>>>         had my Lab.   Sorry NO, I did not replicate Tesla's page 25
>>>         experiment!
>>>
>>>
>>>
>>>
>>>
>>>
>>>         On 9/29/2018 11:05 AM, Mick [email protected]
>>>         <mailto:[email protected]> [EVGRAY] wrote:
>>>>          
>>>>
>>>>         Norm,
>>>>
>>>>         Have you replicated this experiment?
>>>>
>>>>
>>>>         On 9/29/2018 6:22 AM, Norman Wootan [email protected]
>>>>         <mailto:[email protected]> [EVGRAY] wrote:
>>>>>          
>>>>>
>>>>>
>>>>>         Kone! Your quote:  I think Tesla was using a magnet to
>>>>>         snuff the spark out as you say at just the right distance
>>>>>         for the 1/8 wavefront prior to it dropping on the other
>>>>>         side of the 1/4.
>>>>>
>>>>>         DUH!   Please re-read the page 25 from the Colorado
>>>>>         Springs Notes, for Tesla laid out the fundamentals of how
>>>>>         to pulse the earth with negative unidirectional
>>>>>         longitudnal waves using a magnetic quenched discharge
>>>>>         tube.  Yes ! This was his magnetic rectifier via a rapidly
>>>>>         quenched discharge tube.  This is precisely how the
>>>>>         Wardencliff system was going to work with the huge
>>>>>         underground earthing grid.  Sort of like Hector deep earth
>>>>>         ball.  His findings while experimenting with Telegraphy in
>>>>>         1899 allowed his ability to radiate pulses into the ground
>>>>>         at .020 A or 20 milliamps at 200 VDC pulses
>>>>>         (unidirectional with negative polarity).  The elevated
>>>>>         antennae terminal carried a positive charge.  Tesla, the
>>>>>         Master, left this vivid clue as to how your ground pulse
>>>>>         approach should work.   You do not have to re-invent the
>>>>>         wheel for it was given to you to improve!  BTW, Great
>>>>>         work! Norm
>>>>>
>>>>>         On 9/29/2018 12:36 AM, Mick [email protected]
>>>>>         <mailto:[email protected]> [EVGRAY] wrote:
>>>>>>          
>>>>>>
>>>>>>         Kone,
>>>>>>
>>>>>>         A cap will not charge with AC unless the waveform is
>>>>>>         highly asymmetric as each compression or rarefaction
>>>>>>         would need to be caught at 1/8 - 1/4 wavelength and
>>>>>>         disconnected to charge with conventional sine wave for
>>>>>>         instance.   Otherwise as you say the charge is equalized
>>>>>>         with AC.    I think Tesla was using a magnet to snuff the
>>>>>>         spark out as you say at just the right distance for the
>>>>>>         1/8 wavefront prior to it dropping on the other side of
>>>>>>         the 1/4.
>>>>>>
>>>>>>         Likely what you were noticing in your experiments as it
>>>>>>         creates very short DC pulses 1/8 to 1/4 of the wavelength
>>>>>>         so much higher harmonics than the fundamental.
>>>>>>
>>>>>>         High voltage DC in a high rise for instance could cause
>>>>>>         all sorts of interesting havoc charging up layered walls
>>>>>>         as capacitors for instance.  With a pair of diodes and
>>>>>>         GDT's the cap will rise in voltage to destruction and the
>>>>>>         plasma explosions are deafening.  First is a hissing as
>>>>>>         insulation breaks through and the sound of air escaping a
>>>>>>         punctured tire.  As the air ionizes enough to conduct the
>>>>>>         voltage stored in the cap with jump with a huge flash and
>>>>>>         bang, very dangerous!
>>>>>>
>>>>>>         The spheres can be purchased inexpensively in China but
>>>>>>         shipping is another story.   One could use a well I
>>>>>>         suppose but the danger of killing the well motor and
>>>>>>         having no water is a risk too high.  Having enough
>>>>>>         trouble shutting down GFI's around here.
>>>>>>
>>>>>>
>>>>>>         On 9/27/2018 11:51 PM, [email protected]
>>>>>>         <mailto:[email protected]> [EVGRAY] wrote:
>>>>>>>          
>>>>>>>
>>>>>>>         Hi Mick
>>>>>>>         Just my two cents I noticed with spark gapping
>>>>>>>         experiments of about 2000v coming from 90 degree to
>>>>>>>         Airgap of n n pulsed dc ucking coils (konehead motor)
>>>>>>>         the distance of sparkgap adjusted precise could make the
>>>>>>>         ac looking pulse and collapse signal suddenly go all
>>>>>>>         humpy dc with just the right Airgap distance. Someone
>>>>>>>         told me Tesla uses to use sparkgaps to rectify HV all
>>>>>>>         the time as no good HV diodes back then.
>>>>>>>         Also have noticed let's say filling AC cap with
>>>>>>>         AC...when you disconnect charging of it then use cap to
>>>>>>>         discharge to load there is usually nothing there like
>>>>>>>         the forces cancel naturally l don't know
>>>>>>>         But if you rectify before filling cap now those joules
>>>>>>>         and potential in there will "stick" and upon discharge
>>>>>>>         you see a good blast of.power. I noticed same thing with
>>>>>>>         my peak coil shorting stuff in that without diodes first
>>>>>>>         to rectify there is nothing when ac cap discharges to a
>>>>>>>         load...
>>>>>>>         Have you seen Hector's ground rod with large metal
>>>>>>>         sphere capacitor ball in air? This would be interesting
>>>>>>>         to try....maybe restaurant supply store has a couple
>>>>>>>         giant mixing bowls you could put together for sphere...
>>>>>>>         I will look around for that circuit drawing and post it
>>>>>>>         when I find it
>>>>>>>         Kone
>>>>>>>
>>>>>>
>>>>>
>>>>
>>>
>>
>
>