Body
Although I have two copies of the Colorado Springs Notes, it was
unfortunate that I did not find Page 25 info till 2012. In 2012 I had
liquidated the Lab and sole off my 52 acre Research Farm and moved back
into Dallas.
Around 2004, I built Tesla's Disrupter Transformer and Re-worked on of
my X-ray supply pot (60KV) by switching the diode array so that the the
anode output was now negative output instead of positive to be used to
drive the disrupt coil. I had a HVDC negative power supply at 60KV. I
had a bank of capacitors to charge using the HVDC supply. I used a
large DC long throw HV relay which I could fire at various pulse rates
via mechanical insulated actuator. The 60KV caps came out of SLAC,
Stanford Linear Accelerator Complex and I managed to get 60 of them at
2.5 MFD ea. I was discharging about 5 killo-Joules per pulse. The
re-charge time of the cap bank dictated the rate of firing. By
discharging the caps through the very powerful magnetic horn gap I got
that unidirectional pure negative DC discharge which was a blue white
fire and gave the physical shock wave that Tesla described in his
experiments. Was an interesting experiment. I just wish I had found the
page 25 info while I had my Lab. Sorry NO, I did not replicate Tesla's
page 25 experiment!
On 9/29/2018 11:05 AM, Mick [email protected] [EVGRAY] wrote:
>
> Norm,
>
> Have you replicated this experiment?
>
>
> On 9/29/2018 6:22 AM, Norman Wootan [email protected] [EVGRAY] wrote:
>>
>>
>> Kone! Your quote: I think Tesla was using a magnet to snuff the
>> spark out as you say at just the right distance for the 1/8 wavefront
>> prior to it dropping on the other side of the 1/4.
>>
>> DUH! Please re-read the page 25 from the Colorado Springs Notes,
>> for Tesla laid out the fundamentals of how to pulse the earth with
>> negative unidirectional longitudnal waves using a magnetic quenched
>> discharge tube. Yes ! This was his magnetic rectifier via a rapidly
>> quenched discharge tube. This is precisely how the Wardencliff
>> system was going to work with the huge underground earthing grid.
>> Sort of like Hector deep earth ball. His findings while
>> experimenting with Telegraphy in 1899 allowed his ability to radiate
>> pulses into the ground at .020 A or 20 milliamps at 200 VDC pulses
>> (unidirectional with negative polarity). The elevated antennae
>> terminal carried a positive charge. Tesla, the Master, left this
>> vivid clue as to how your ground pulse approach should work. You do
>> not have to re-invent the wheel for it was given to you to improve!
>> BTW, Great work! Norm
>>
>> On 9/29/2018 12:36 AM, Mick [email protected] [EVGRAY] wrote:
>>>
>>> Kone,
>>>
>>> A cap will not charge with AC unless the waveform is highly
>>> asymmetric as each compression or rarefaction would need to be
>>> caught at 1/8 - 1/4 wavelength and disconnected to charge with
>>> conventional sine wave for instance. Otherwise as you say the
>>> charge is equalized with AC. I think Tesla was using a magnet to
>>> snuff the spark out as you say at just the right distance for the
>>> 1/8 wavefront prior to it dropping on the other side of the 1/4.
>>>
>>> Likely what you were noticing in your experiments as it creates very
>>> short DC pulses 1/8 to 1/4 of the wavelength so much higher
>>> harmonics than the fundamental.
>>>
>>> High voltage DC in a high rise for instance could cause all sorts of
>>> interesting havoc charging up layered walls as capacitors for
>>> instance. With a pair of diodes and GDT's the cap will rise in
>>> voltage to destruction and the plasma explosions are deafening.
>>> First is a hissing as insulation breaks through and the sound of air
>>> escaping a punctured tire. As the air ionizes enough to conduct the
>>> voltage stored in the cap with jump with a huge flash and bang, very
>>> dangerous!
>>>
>>> The spheres can be purchased inexpensively in China but shipping is
>>> another story. One could use a well I suppose but the danger of
>>> killing the well motor and having no water is a risk too high.
>>> Having enough trouble shutting down GFI's around here.
>>>
>>>
>>> On 9/27/2018 11:51 PM, [email protected] [EVGRAY] wrote:
>>>>
>>>> Hi Mick
>>>> Just my two cents I noticed with spark gapping experiments of about
>>>> 2000v coming from 90 degree to Airgap of n n pulsed dc ucking coils
>>>> (konehead motor) the distance of sparkgap adjusted precise could
>>>> make the ac looking pulse and collapse signal suddenly go all humpy
>>>> dc with just the right Airgap distance. Someone told me Tesla uses
>>>> to use sparkgaps to rectify HV all the time as no good HV diodes
>>>> back then.
>>>> Also have noticed let's say filling AC cap with AC...when you
>>>> disconnect charging of it then use cap to discharge to load there
>>>> is usually nothing there like the forces cancel naturally l don't know
>>>> But if you rectify before filling cap now those joules and
>>>> potential in there will "stick" and upon discharge you see a good
>>>> blast of.power. I noticed same thing with my peak coil shorting
>>>> stuff in that without diodes first to rectify there is nothing when
>>>> ac cap discharges to a load...
>>>> Have you seen Hector's ground rod with large metal sphere capacitor
>>>> ball in air? This would be interesting to try....maybe restaurant
>>>> supply store has a couple giant mixing bowls you could put together
>>>> for sphere...
>>>> I will look around for that circuit drawing and post it when I find it
>>>> Kone
>>>>
>>>
>>
>
>