Body
A bit of testing, and I can confirm that the more mass the better!
So a few spots of soldier won't do much, but a block of lead, or a coil of
iron wire is a different story!
It also seems advantageous to put materials in parallel as in the Moray
diagram, I think this creates an additional effect.
I am not saying this is the only secret to Free Energy and harnessing of
aetheric energy, Far far from it, but I think this might be the best hidden
secret with the most potential that has been waiting to be seen!
On Thu, Aug 16, 2018 at 2:51 PM John Berry <[email protected]> wrote:
> I'll add a few more...
>
> So, it seems mass means something, Louis Rota (http://wikirota.org) used
> large masses of multiple metals.
>
> Kapanadze used a big buried steel radiator connection to the ground.
>
> I need to check that, but we see it again with Moray, he didn't use a
> sample of silver, despite it's price he used a largish bar of it!
> http://www.diagrambay.today/circuit-t-henry-moray.html
>
> A few drops of Solider is likely not enough, nor likely would many smaller
> batteries be as suited as larger batteries, also likely playes aren't as
> good as wires, and wires aren't as good as bars, this is just speculation,
> I need to test these theories.
>
> What about Joseph Newmann? He uses small batteries? Yes, but hundreds of
> them, also I don't think his switches are all copper. Also his magnet is
> not in a closed magnetic mcircuit so it should contribute.
>
> What about John Hutchison? Well, probably his Vandegraff and Tesla coil
> terminals are not Copper, but moreover he has a high energy bandwidth due
> to the different frequencies and energies he provides, so he achieves it a
> different way.
>
> What about Markovitch He might have used various metals, and he used a
> crystal, but more over he uses what I consider to be another different way
> of doing this, you offer energy 2 or more paths of different lengths, I am
> not sure why it works, but it does work and it seems to create a similar
> effect.
>
> What about the Adams motor? This has an open magnetic circuit and so it
> should apply.
>
> What about Paul Pantones GEET? It uses copper pipes and iron rod and
> steel.
>
> The Joe Cell does wonders when installed in cars, the energy works with
> what is in the car which includes many different energies and materials.
>
> So... use multiple metals, more mass is better (probably), ideally in
> series or parallel, otherwise as a cut cylinder C or a wire or rod inside.
> Also a Conical or Pancake coil...
> Also some wires cut to a bunch of different lengths (used by Keely)
> Takes a few minutes to cut, does not need to be neat.
> And some wires of different lengths (very short to long) in parallel...
> (quicker to make if you use uninsulated wire)
>
> Also a totally different correlation, energy like this conducting along a
> magnetic field does something for sure, previously mentioned here...
> Also apply the negative pole of an additional otherwise unconnected
> battery to a circuit (Ed Gray's split the positive means don't connect the
> positive of one battery to the circuit IMO)
>
> Also arc lamps create a wide energy bandwidth! They create lots of heat,
> UV-C, UV-B, UV-A, full spectrum of visible light, Radio spectrum noise
> (RFI), Plasma/ions and chemical reactions, Bucky balls are made, they make
> sound. The energy from them can couple into wires and other things and
> feedback.
> The aetheric energy released with the conventional energy becomes
> conditioned, and recycled...
>
> A lot of Free Energy circuits have a portion that is isolated from the
> ground or mains...
>
> Finally, Free Energy ideally requires a degree of de-coupling, a bridge
> rectifier, or loose coupling transformer or other methods are good at
> allowing energy to be induced that is not reflected back on the input as
> increases current draw.
>
> If I am right, and I am personally certain that I am, then using multiple
> metals and other methods to "increase the aetheric bandwidth" will be
> hugely helpful, but they won't necessarily be enough if aetheric energy is
> not working in your circuit in the first place, that is easily fixed, but
> just thought I should mention that, this is likely no harder than attaching
> the battery as I explained and joining wire the right way.
>
>
> On Thu, Aug 16, 2018 at 1:53 PM John Berry <[email protected]> wrote:
>
>> I have had an insight into Free Energy...
>>
>> Let's start off with 2 early discoverers of Free Energy...
>>
>> Both of them took multiple different metals...
>> Used them in an equal manner...
>> Buried them in the ground...
>> Connected to arc lamps...
>> Which glowed with a white light that seemed to be cold or differed from
>> conventional electricity.
>>
>> I have just described both Louis Rota and Nathan Stubblefield.
>>
>> Ok, let's try another... this one didn't use earth energy and didn't
>> even use anything pretending to be electricity, but he took wire made of 3
>> layers of 3 different metals.. And got Free Energy.
>>
>> You might have guessed that one, it's Keely.
>>
>> Ok, how about someone who made a device that has been called "Tri Metal
>> Generator"? That's Tesla, it used iron, Aluminium and Copper, though the
>> details besides that are sketchy... Tesla also used Aluminium in his
>> Magnifying Transmitter (Aluminium tube) and the ground employed steel in
>> part I believe.
>> Also, if this multi metal thing is doing what I think, Conical and
>> pancake coils are an alternative or additional method.
>>
>> Ok, how about another who used both a ground and an Antenna, and then
>> just happened to include a large bar of lead and a bar of silver in
>> parallel?
>> That's Moray according to one witness! For what conventional purpose??
>>
>> How about 8 different claims of invisibility I have come across that have
>> employed conduction through copper and steel!? Coincidence? Maybe more...
>>
>> Coler used pancake coils, and Silver wires in parts and iron rods through
>> which current was conducted.
>>
>> I can also argue that Daniel Mcfarland Cook, Hubbard, Perrigo,
>> Hendershot, Bedini all use iron in ways that differ from that of the normal
>> use, and from my tests this results in much the same result as if it were
>> included in the circuit. One way if by using a split cylinder or tube, the
>> other is using a rod or bundle of iron wires wound with a copper
>> electromagnet, by being open circuit the energy from the iron mingles with
>> the copper.
>>
>> Some or all version's of Floyd Sweet's device included an Aluminium Pipe
>> or cage that is magnet and coils sat inside of. A strange details.
>>
>> Carbon brushes would count... A lot of people consider DC motors to have
>> a too high efficiency and to be prone to exhibiting the characteristics to
>> be made OU.
>> A number have also claimed carbon spark gaps have been involved in OU.
>>
>> Tesla Switch used a lot of very large batteries, so that involves lead...
>>
>> Searl used rings of different materials and rollers of different
>> materials in parallel.
>>
>> Swiss ML (Paul Bauman) uses Aluminium cans and the Linden experiment used
>> iron wire (plus perspex and Copper and Aluminium), we should assume iron
>> wire is therefore used in the full machine as well.
>>
>> Ed Grey used a carbon block resistor...
>>
>> Steven Marks used steel/iron wires.
>>
>> Lakhosky's MWO might not be Free Energy, but he used a lot of different
>> diameter circles and then used different metals for the different rings.
>> This suggests some force comes into play when metals or materials are
>> mixed.
>>
>> Dotto's Ring reportedly levitated, and sometimes glowed, but it used
>> Copper and a segment of Constantin Alloy.
>>
>> Ronald Stiffler's TMB (Thermal Magnetic Battery) despite being milivolts
>> and microamps and without an inductive load, would sometimes have a fat
>> blue 1/4 inch arc when the circuit was broken, as well as responding to
>> movement of things in the area... It passed electricity "somehow" through
>> a Ceramic magnet, though a cardboard or balsa layer, though plastic
>> film... And it used Tin as one of the plates, as well as having a magnet
>> in series.
>>
>> C.Earl Ammann used iron wire coil to power a alarm which would have used
>> copper wire.
>>
>> There is a report that a steel Pyramid being welded levitated, so that's
>> steel and copper in the circuit.
>> There are other reports of welding causing things to vanish in Gerry
>> Vassalitos's books.
>>
>> Stan Deyo mentioned an antigravity experiment called the "Wedding cake
>> device" as it had 3 layers of Plywood circles and coils, but the coils were
>> wound with iron wire, but powered from a normal copper based power source.
>>
>> My own research supports the idea that metals and used correctly other
>> materials by being used together leads to a wider aetheric energy
>> bandwidth, by making the energy bandwidth involved larger, the aetheric
>> functions begins to affect to have a more dominant effect, it affects more
>> of the physical world when it's bandwidth is increased.
>>
>> This is pretty compelling!
>>
>> Now ask yourself, how many unsuccessful experiments have not use ample
>> amounts of other metals besides a few drops of solder or a small battery
>> here or there?
>>
>> Norm, that buzzer, wasn't Steel effectively in that circuit?
>>
>> John
>>
>