Re: [EVGRAY] Re: Spark gap

Body

Thanks Warren for the insight on them but here I would have to use a
modified camp stove  there big with a large propane burner .here's a PDF
you may not have yet .in it is the possibility of your five horse power
source .and just how different it really is from normal electric .I like
using a computer read from text function on my tablet with it it turns the
150 pages in to a audio book making it a lot easier to get though .easy on
the eyes .ears only .
On Aug 4, 2018 8:51 PM, "Warren Keillor [email protected]
[EVGRAY]" <[email protected]> wrote:

>
>
>
> James
> Old batteries are just fine
> While you are doing your lead melting
> Make yourself a little mold for the connecting bus bars, and solder them
> while assembling the battery
> One can really enjoy this whole process of casting metals.
> Lead melts at such a low temperature, like solder, that I  often just use
> a tuna fish can on the top of the stove for small castings.
> If you like the process, you can make whatever you want in  various alloys.
> I digress.
> Lead can be cast in silicone molds, dry plaster, even wood use a 3/4"
> thick steel plate topped table work bench, or even the top of my cast iron
> table saw.
> If you want to have fun just casting objects, or making hollow copper, or
> nickel complex  shapes, remember you can electroplate the lead ( or
> Cerobend) and then melt out the lead leaving the seamless copper form.
> Battery plates are very straight forward for deep cycle as you just don't
> care how much they weigh.
> Fat plates are just fine.
> Mars metals here in Ontario, makes lead sheets, and they can come in
> numerous thicknesses.
> Your used batteries work fine and are very cheap. Do it outside when you
> melt them on a bonfire.
> Cheers Warren
> Sent from Yahoo Mail on Android
> <https://go.onelink.me/107872968?pid=InProduct&c=Global_Internal_YGrowth_AndroidEmailSig__AndroidUsers&af_wl=ym&af_sub1=Internal&af_sub2=Global_YGrowth&af_sub3=EmailSignature>
>
> On Sat, 4 Aug 2018 at 2:59 PM, James Glinski [email protected] [EVGRAY]
> <[email protected]> wrote:
>
>
> Warren I was thinking of using old batteries not usable for anything but
> recycling .the plastic Case's too . what do the use for a bus bar to
> connect the plates .?
> On Aug 2, 2018 10:03 PM, "Warren Keillor [email protected]
> [EVGRAY]" <[email protected]> wrote:
>
>
>
> James
> It is not so difficult to make your own battery plates of the deep cycle
> type.
> First of all deep cycle batteries have plates that can be 1/4" thick!
> You can easily pour 1/4" plates on a thick steel plate laid down
> absolutely level with 1/4" sides.
> For smaller lead sheets, I melt them in a seamless tin can.
> For the really large plates I use a large electric crucible.
> They need a plastic tank.
> Cheers Warren
>
> Sent from Yahoo Mail on Android
> <https://go.onelink.me/107872968?pid=InProduct&c=Global_Internal_YGrowth_AndroidEmailSig__AndroidUsers&af_wl=ym&af_sub1=Internal&af_sub2=Global_YGrowth&af_sub3=EmailSignature>
>
> On Thu, 2 Aug 2018 at 6:22 PM, James Glinski [email protected] [EVGRAY]
> <[email protected]> wrote:
>
>
> Warren would be so kind as to relate the information on construction of
> the DIY deep cycle batteries your German friend told you ?you said I think
> something about iron and casting .I think that DIY deep cycle batteries
> would be a good combo with Rene or Bedini charging .thanks for your time
> Jim .
>
> On Wednesday, August 1, 2018, Warren Keillor [email protected]
> [EVGRAY] <[email protected]> wrote:
>
>
>
> Sven
> Do I understand you correctly that you use a single diode in the old Tv
> transformer circuit to rectify to a dc spark, rather than a full wave diode
> bridge?
> Is it OK to use a fwd circuit, and still get the efficiency you are seeing?
> Cheers Warren
>
> Sent from Yahoo Mail on Android
> <https://go.onelink.me/107872968?pid=InProduct&c=Global_Internal_YGrowth_AndroidEmailSig__AndroidUsers&af_wl=ym&af_sub1=Internal&af_sub2=Global_YGrowth&af_sub3=EmailSignature>
>
> On Wed, 1 Aug 2018 at 3:01 PM, [email protected] [EVGRAY]
> <[email protected]> wrote:
>
>
> Hello Jakob, you quoted me.
>
> The way I see your drawing I should use the energy to pass it through a
> transformer before. The spark is quite small and if you touch your
> fingers there is a tingling, I do not think that you can draw the power
> from it..
>
> On my Youtube channel, I have a better experiment on the connection of the
> earth.
>
> It's about a diode splitter transformer from an old TV with which I
> generate high voltage and discharge the energy over a spark gap.
>
> When I connect the earth to the negative side minus the spark gap arcing
> increases sharply to the number in the same time, without the extra energy
> being applied.
>
> I find that very interesting that over the earth apparently extra energy
> is sucked in.
>
> Personally, I find it very dangerous to work with these voltages, and
> spark gaps are not my cup of tea since it produces ozone and is not exactly
> health promoting. laughing.
>
> regards
>
> Sven
>
> 
>