Body
Hi Sven,
Ferro resonance is very fast pulses formed by saturation of the core which happens very fast. This makes everything ring at its resonant frequency. Every component has its own resonant frequency as all components have parasites of inductance and capacitance (as well as resistance). The reactive components which are the inductive and capacitive ones then forms tank circuits that will ring or oscillate at their resonant frequencies when hit by fast enough pulses. Saturation of the transformer core is just the hammer that hits the reactive components with very quick signals. The windings of the transformer change its inductance from large to very small when the core saturates. This makes the impedance of the transformer almost vanish and thus can be used as an ultra-fast switch.
"I always think of the 3W Pulser with which Hector has a 10KW ringing generated in a transformer."
If you can input 3W of continuous power and take out 10kW of continuous power then a self-runner can be made. If the energy is just stored and then released as 10kW pulses of 3W of continuous power then there's no gain in continuous power. Tesla made MW pulses from input of continuous kW power. Radars do the same thing.
"As far as the safety measures are concerned, I try to compensate for this with oversized components and additional freewheeling diodes, because I am not so fit in such things."
It would probably be cheaper to make a protection circuit than using very rugged components. Your chosen controller already has the shutdown input for using a protective circuit to shut down the running if overloaded.
Regards
Ole
---In [email protected], <s.friedrich@...> wrote :
Hi Ole,
I want to create exactly the harmonics or use it to produce more efficient Ferroresonanz without repercussions or to find the sweetspot of the transformer I use.
I always think of the 3W Pulser with which Hector has a 10KW ringing generated in a transformer.
In principle, I want to pulse the transformer in push-pull mode.
In Transverter R and D pdf it is described on page 25 what Jinii did. Unfortunately, the website of him is not accessible to me or just not available anymore.
And in the RE-OU pdf on page 48
I deposit the pdf times.
As far as the safety measures are concerned, I try to compensate for this with oversized components and additional freewheeling diodes, because I am not so fit in such things.
regards
Sven