Body
This spark gap with pure carbon rods involved is at the heart of Tesla's
work and the Swiss power wheel .the generator provides the high voltage and
the spark gap in the big cap cans .the spark produces a high energy release
from the ether and spraying energy Thu several layers of copper tubes with
holes charging them and running the wheel and self sustaining the device
.it's in evgrays tube too .carbon seems to be the key why because I think
it goes to the flipping of carbon in to boron and back releasing beta
radiation a cold energy pump .with excess energy but the energy needs to be
kept going in one direction only . gray did it with a electrical vibrator
tied to a hivoltage transformer .you might test it with a car coil and a
MOSFET with carbon rods gap and surounded by concentric copper tubes .he
made so much extra energy he had to bleed it off to control it .adding
magnets along side of the carbon rods causes the energy to go one way .but
they used diodes . this carbon seems to be at the heart of it all. Even
Tesla said it was the best carrier of this type of energy .I think it's the
holy grail of free energy. But controlling it is a another mater ..
On Jun 10, 2018 11:01 PM, "David G Dawson [email protected] [EVGRAY]" <
[email protected]> wrote:
>
>
>
> *Focus to the EVGRAY Forum: EV Gray CST:*
>
> *"Energy Conversion Switching Element Tube" *See attached.
>
> http://www.rexresearch.com/evgray/1gray.htm
>
> In my most humble opinion, all of those that attempted a replication of
> the CST failed to understand the working criteria of the original Valve.
> The addition of the Silver tips is, I believe, by one of those replicators
> and was NOT required.
>
>
>
> *What all of these people failed to understand was that the unit operated
> without a spark and was a PLASMA event that was taking place at the gap. *One
> simple reason for its bottom Carbon rod to be made adjustable just to the
> point where the spark extinguished.
> Imagine how long the Tube would have lasted with a spark ongoing full time?
> This would have been similar to the old Carbon Arc Projectors that
> actually used up the Carbon rod to supply the white light and often failed
> as the Carbon rod had to replaced (1940/50s).
> You actually adjusted the speed of the rod being consumed for the best
> lighting effect.
>
> *I actually have a bench which I call the 'EV Gray Bench' and is where I
> do all of my high voltage work and where the plasma event was discovered.*
>
> For all of those at *EV Gray* - this is what you are supposed to be here
> for and more to do with respect for one another without any expletives of
> any manner.
> Now, I have given you some most valuable information and hope that this
> may lead to you also discovering a plasma event at the spark gap without
> the spark.
> This is what Tesla was doing with his Magnet around the Spark Gap as he
> wanted to extinguish the spark as quickly as possible as this is where the
> magic begins.
> There is also another modification that I have passed on here earlier with
> respect to Diodes in his motor schematic.
>
> Now what is the name of this Forum again EVGRAY.
>
> Respectfully
>
> Smokey
>
>