Body
*Impulse Discharge:*
If you still have doubts, go and check the work of Chernetsky/Galkin in
their 'Self Generating Discharge' which was replicated fully by Frolov:
http://rexresearch.com/chernetskii/chernetskii.htm
By this time you should all have a good idea of what this phenomena is
all about.
This is the very first time that all of this has been put together in a
bundle that allows it to be understood.
No spark just a PLASMA transfer in the gap.
Once you achieve the ambient or ether entry your powers supply amps will
drop to about 1/3rd.
More on this at Yahoo Group 'dltorsiondevices'.
Good luck in your experiments.
Smokey
-------- Forwarded Message --------
Subject: EV Gray CST
Date: Mon, 11 Jun 2018 14:00:38 +1000
From: David G Dawson <[email protected]>
To: [email protected], [email protected],
[email protected], [email protected]
*Focus to the EVGRAY Forum:
EV Gray CST:*
*"Energy Conversion Switching Element Tube"
*See attached.
http://www.rexresearch.com/evgray/1gray.htm
In my most humble opinion, all of those that attempted a replication of
the CST failed to understand the working criteria of the original Valve.
The addition of the Silver tips is, I believe, by one of those
replicators and was NOT required.
*What all of these people failed to understand was that the unit
operated without a spark and was a PLASMA event that was taking place at
the gap.
*One simple reason for its bottom Carbon rod to be made adjustable just
to the point where the spark extinguished.
Imagine how long the Tube would have lasted with a spark ongoing full time?
This would have been similar to the old Carbon Arc Projectors that
actually used up the Carbon rod to supply the white light and often
failed as the Carbon rod had to replaced (1940/50s).
You actually adjusted the speed of the rod being consumed for the best
lighting effect.
*I actually have a bench which I call the 'EV Gray Bench' and is where I
do all of my high voltage work and where the plasma event was discovered.*
For all of those at *EV Gray* - this is what you are supposed to be here
for and more to do with respect for one another without any expletives
of any manner.
Now, I have given you some most valuable information and hope that this
may lead to you also discovering a plasma event at the spark gap without
the spark.
This is what Tesla was doing with his Magnet around the Spark Gap as he
wanted to extinguish the spark as quickly as possible as this is where
the magic begins.
There is also another modification that I have passed on here earlier
with respect to Diodes in his motor schematic.
Now what is the name of this Forum again EVGRAY.
Respectfully
Smokey