Body
Thick champagne bottles were the best .but salt water caps are very good .
what's missing is a hivoltage large variable cap .
On Apr 25, 2018 10:14 AM, "Norman Wootan [email protected] [EVGRAY]" <
[email protected]> wrote:
>
>
> Warren & Sven! Regarding capacitors (condenser) (Leyden Jars) I had
> opportunity to talk to Ken Shoulders (RIP) at New Energy Conference, Denver
> back in 1995. I asked him what kind of power supply he used to charge his
> discharge caps to do the charged cluster experiments. He said he charged
> the caps with an electrostatic machine since what you are doing is
> potentialize the plates of the cap with HVDC to displace the electrons in
> the dielectric. The reason that Leyden Jars carry such a huge amount of
> power is in the thick (1/4 inch) crown glass (optic clear glass) that has a
> huge electron displacement. The modern capacitors have very thin film
> dielectrics and the old technology has been lost. Most people (Most on
> here) do not know how a condenser (capacitor) really works. Take the three
> pail experiments back in the old day! You have an outer pail (conductor)
> with a positive charge (+) a middle pail (dielectric, glass) and an inner
> pail (conductor) negative charge (-). Charge the apparatus up with HV
> electrostatics. take it apart and you find no charge on the components.
> put it back together and the original charge is present! This proves that
> the HV potential is stored within the dielectric by electron displacement.
> this is very old stuff done by Faraday way back when. If you have a very
> thick dielectric like a good Leyden Jar there is a lot of power available
> here! I would make condensers of soda lime glass (water clear with no
> metals) for my energy storage that you recover from Neutral Spike
> experiments. These could be flat plate stacks with thin foil conductors and
> 1/8th inch thick glass. Do not worry about the HV aspects since this is
> the break-over limits of your caps. Sure they will hold a 500KV charge
> (properly designed) but you are working at 1500VDC.
>
> On 4/24/2018 12:40 PM, [email protected] [EVGRAY] wrote:
>
>
>
> Hello Warren,
>
> I think in the electric field, free energy works best, it acts like a
> vacuum cleaner. I think even if you can capture the energy and then
> discharged in a transformer, you have normal energy as we know it.
>
> I have now wired the 3 phase transformer to highest impedance and am now
> at 1200V RMS and 1500V peak.
>
> I will install very small coupling capacitors or connect them in series
> for smaller capacities and the transmission side with 2x 440V suppressor
> diodes in series, short circuit so that the voltage can not go above 1000V
> to protect the diode plug.
>
> If the diode plug capacitors are larger, the voltage is smaller or I hope
> to be able to further reduce the effects on the transverter (3-phase
> transformer).
>
> I found here an interesting site for the Testatika and capacitive
> transformer, it is in German but you can translate yes.
> The drawings are clearly but above all where a condenser, a light bulb
> sucks energy over the earth and it brings to light.
>
> http://www.hcrs.at/TESTA.HTM
>
>
> regards
>
> Sven
>
>
>
>