Body
Hi Kone,
Before Pierre showed the way of connecting the micro poles I thought of using a 6-legged bridge (6-phased bridge) to supply the stepping 3-phased field. This may be valid according to the patent applications mentioned by Gerry (message 105878 https://groups.yahoo.com/neo/groups/EVGRAY/conversations/messages/105878). But Pierre shows https://www.youtube.com/watch?v=Nh4cC9hIXbg all the coils connected in series and the field still rotating. Your field is not rotating when seen from the fixed secondary coil. I still think this experiment may be worth doing to see if the rotating field is necessary. But this more resembles a transformer which may be OK like the UDT of P.R. Jensen. Just be aware that output isn't a sine wave when the input is a square wave although it can be depending on the load.
I think the excess energy comes from the parallel fields made from the micro-poles. This is the principle of inversion (W.B. Smith) where the single magnetic fields are cohered into a new field representing instead of 6 times the energy of one micro-pole (superposition) it becomes 6^2 = 36 times the energy of one micro-pole during coherence. The current through the six poles are still in series and thus the same current for all 6 micro-poles (coherent). The output to input power ratio then becomes 36/6 = 6 times.
Pierre mentioned that it was a 6-poled stator and I falsely called it a 6-poled 3-phased stator. Actually it's a 6-poled 1-phase or a 2-poled 3-phased stator. The way you put it definitely makes it a 6-pole 1-phase stator.
Regards
Ole
---In [email protected], <konehead@...> wrote :
Hi Ole and Dave and everyone
Here is drawing I just finished and is of my idea showing "possibility" how to switch in power to a 30pole stator frame....note the adjacent phases share and run through same pole slot, the phases all connect in series, and there are 6 phases NSNSNS
Instead of doing it like Pierre, where each phase has 2 relays on the IN to each phase and another 2 relays on OUT of each phase, (for total of 24 switches to pulse with alternating DC into this NSNSNS pattern)
This idea here, has the six phases in series, with either LHR or RHR wound phase winds, to create the NSNSNS pattern, and then just one H-switch to send in power to all phases....so this means just 4 switches, instead of 24 to pulse in alternating DC just one phase....eventually phases will sequentially pulse 30 times in one revolution, with this 30 pole stator frame...this not show right now, this is only pulsing of one phase of the 30 pole stator frame
https://sites.google.com/site/alternativeworldenergy/pulsed-stator-generator https://sites.google.com/site/alternativeworldenergy/pulsed-stator-generator