Body
That sounds like the roto verter the Aussie guy made a one horse DC motor
connected to a RV turned to gen ? But the current and voltage ran Thu the
gen to a DC motor became a gen with 120 from the RV going Thu it ..kono ist
that one I showed you that was real strange. on panacea web page PDF ? On
the I couldn't figure out what's what.
On Feb 22, 2018 9:25 PM, "Warren Keillor [email protected]
[EVGRAY]" <[email protected]> wrote:
>
>
> Steve
> You will like my desiign for a Clem machine based on an old beyond best
> before date propane cylinder bottles.
> It uses a 20 lb bottle, empty, of course.
> Cut off the guard around the valve, and the bottom ring, carefully, not to
> damage the pressure vessel. Remove the valve
> Screw in a long pipe nipple into the tank where you removed the valve.
> Place the tank in the metal lathe fastening to the pipe nipple.
> Turn the chuck by hand with the lathe in neutral making sure it is
> centered and true. Put a hole saw in the tail stock that is the minor
> diameter of the pipe thread for a two inch diameter pipe nipple.
> Thread the tank while on the lathe ( by hand) using a pipe tap for 2"npt.
> Fasten in a pipe nipple after turning a land for a 55mm ID bearing.
> Remove the tank from the lathe and arc weld the tank to the pipe nipple
> which is fastened threaded in to the tank, holding it tight in place.
> Turn a piece of steel round stock to match your generator shaft size and
> the other end to the pipe diameter of the tank valve thread, allowing a
> bearing land.
> Next, 8 rows of six 1/8" street elbows are drilled and tapped around the
> diameter, pipe plugs drilled with 1/16" hole in each
> Now this next item is actually wonderful. It is a steel squirrel cage
> industrial fan that the inside just clears the elbow nozzles. This fan is
> the chassis for mounting bearings, pump and generator, in addition to being
> the thrust stops for the jets.
> The entire assembly is then placed in a 50 gallon drum. Then automatic
> tansmission fluid is filled to the intake joint.
> The lower pump delivers 20 ' head, and the upper motor is 3 hp DC motor,
> then generator, we invert to drive the lower pump.
> Enjoy
> Cheers Warren
> Sent from Yahoo Mail on Android
> <https://overview.mail.yahoo.com/mobile/?.src=Android>
>
> On Thu, Feb 22, 2018 at 10:27 AM, [email protected] [EVGRAY]
> <[email protected]> wrote:
>
>
> darrell
> You are really good at finding things on the web have you time to locate
> these two pieces the unit he is using for a motor and the Generator
> https://www.youtube.com/watch?v=_-9Ei7v-ZY0&feature=youtu.be
> Steve
>
>
>
> -----Original Message-----
> From: [email protected] [EVGRAY] <[email protected]>
> To: EVGRAY <[email protected]>
> Sent: Wed, Feb 21, 2018 9:02 pm
> Subject: [EVGRAY] Re: SCR TURN ON AND OFF INFO FROM FILES
>
>
>
> I'll see if I can pass it on to you as an attachment Kone my friend...
>
> Nope! They even took the copy I had saved in my video files in case
> youtube decided to do that... Live and learn, save in zipstyx's.
>
>
>