Re: [EVGRAY] Re: Winding BiTT with C shape winding tool

Body

Maybe tuning from prim to sec ? That will shut it down
On Feb 1, 2018 2:28 PM, "[email protected] [EVGRAY]" <[email protected]>
wrote:

>
>
> HI Gerry
>
> I cant see anything - can you email attachments to me at [email protected]
>
> I tested my florist wire BiTT today, using the output of two in phase
> coils of my wooden muller generator - it worked terrible something is
> wrong!
>
> As example, the two generator in series in phase Coils output 42VDC into
> 200uf cap through FWBR of 50V shottkys...with AC on meter, no caps or
> diodes they show 27Vac
>
>
> with 93 ohm resistor, and in DC to test power with that cap, I  get 350ma
> into resistor and 3Vdc across resistor for about a watt of power...rotor
> spinnin about 1200rpm and 8 magnets...
>
> I connected these coils straight into Bitt primary, no diodes or FWBR
>
> they make good AC even though magnets all N facing at least this is what
> we saw on scope in Germany a few months ago...
>
>
> Center primary on myBiTT is 58 ohms
>
> I get about .7Vac (point 7V) from one of my secondaries...didn't both to
> hook up other it is so bad....maybe litz wire is problem maybe florist wire
> lengths with their "breaks" in construction and not continuous wire all the
> way around is making very lousy transformer action...I think this might be
> it....don't know but there seems to be no transfer of power to
> secondaries...
>
>
> ciaoKone
>
>
> 
>