Re: [EVGRAY] back to genesis coil .....

Hector,

Genesis has two types of coils and two cores so which coil are you
referring to put inside, the one wound like a wirewound resistor?


On 9/24/2018 4:06 AM, [email protected] [EVGRAY] wrote:
>  
>
> seek it in the files section ..
>
>
> use instead an iron silica core , say electric conduit pipe
>
>
> wind the double genesis coil in it
>
>
> exite with coilbangher using exact resonant capacitance value  at best
> Q factor
>
>
> if it keeps flashing forever you got it ...
>
>
> then you have to deal with the problems it causes ( from biological
> disruption to metal teleportation,and RF signal broadcasting  )
>
>
> and what the hell you will do with it! 
>
>
> any mistake can be deadly or life changing ,,,
>
>
> Ask Brian Prater about that subject " he knows ",,,
>
>
> (H)
>
>
>
>

Hector,

Sorry meant to say non inductive wirewound resistor but that is
confusing also as these are wound helical and the papers refer to a non
inductive wire wound linearly, so which coil do you refer wound like the
outer or inner coil?


On 9/24/2018 4:06 AM, [email protected] [EVGRAY] wrote:
>  
>
> seek it in the files section ..
>
>
> use instead an iron silica core , say electric conduit pipe
>
>
> wind the double genesis coil in it
>
>
> exite with coilbangher using exact resonant capacitance value  at best
> Q factor
>
>
> if it keeps flashing forever you got it ...
>
>
> then you have to deal with the problems it causes ( from biological
> disruption to metal teleportation,and RF signal broadcasting  )
>
>
> and what the hell you will do with it! 
>
>
> any mistake can be deadly or life changing ,,,
>
>
> Ask Brian Prater about that subject " he knows ",,,
>
>
> (H)
>
>
>
>

seek it in the files section ..
 

 use instead an iron silica core , say electric conduit pipe 

 

 wind the double genesis coil in it 

 

 exite with coilbangher using exact resonant capacitance value  at best Q factor 

 

 if it keeps flashing forever you got it ...
 

 then you have to deal with the problems it causes ( from biological disruption to metal teleportation,and RF signal broadcasting  )
 

 and what the hell you will do with it!  

 

 any mistake can be deadly or life changing ,,,
 

 Ask Brian Prater about that subject " he knows ",,,

 

 (H)

Hector,

So you are saying you built the helical wind on the outside of tubing. 
A helical wind but like a Tesla hairpin so the two conductors are on the
top or bottom of the shaft and at the opposing end they just make a u turn?

Did you spank this with a battery powered supply or with something from
the wall outlet?

One of these days you are going to weld the coil to the core on a nearby
pole pig, just blame it on the squirrels.

I have seen this resonant spike energy go right through the core of an
isolation transformer and still cause a grounding loop issue, I think
the metal core was acting as some kind of virtual ground creating a
differential with the physical ground as the core was cool to the touch
so sinking something.  In that I am not surprised it murdered your kill
a watt Chinese solid state watt meters. 

On 9/24/2018 1:43 PM, [email protected] [EVGRAY] wrote:
>  
>
> Fact there is only one coil .... on a single tube core , i did that in
> 7.5 kV 
>
> it just screwed 2  kill-a-watt meters with the CEMF spikes  on less
> than 100W  so the spikes were well over 2500W it EMPed the 2 meters to
> death,
>
> on self banging it had metal teleport radiation , that was when i
> stopped using it need a better lab ...with proper shields ...
>
>
> (H)
>
>

In fact it is as is self canceling in a way if shorted at one end and feed by the other end . else it will not be resistive , but the core metal makes it different , self inducing potential ... open ended  in RF its another self inducing method 


(H)  


 

---In [email protected], <mkjekyll@...> wrote :

 Hector,
 Genesis has two types of coils and two cores so which coil are you referring to put inside, the one wound like a wirewound resistor?

 
 On 9/24/2018 4:06 AM, arkresearch@... mailto:arkresearch@... [EVGRAY] wrote:

   seek it in the files section ..
 
 
 use instead an iron silica core , say electric conduit pipe 
 
 
 
 wind the double genesis coil in it 
 
 
 
 exite with coilbangher using exact resonant capacitance value  at best Q factor 
 
 
 
 if it keeps flashing forever you got it ...
 
 
 then you have to deal with the problems it causes ( from biological disruption to metal teleportation,and RF signal broadcasting  )
 
 
 and what the hell you will do with it!  
 
 
 
 any mistake can be deadly or life changing ,,,
 
 
 Ask Brian Prater about that subject " he knows ",,,
 
 
 
 (H)

Fact there is only one coil .... on a single tube core , i did that in 7.5 kV  

it just screwed 2  kill-a-watt meters with the CEMF spikes  on less than 100W  so the spikes were well over 2500W it EMPed the 2 meters to death,

on self banging it had metal teleport radiation , that was when i stopped using it need a better lab ...with proper shields ...


(H)