AW: Re: AW: Re: AW: Re: AW: Re: AW: Re: [EVGRAY] Capacitor and how to reach the capacity.

Shit translator, I meant by the Variac I fit the charging voltage of the push-pull transformer fed by the diode plug. When the charging voltage is increased, the current at the ammeter rises first, when the voltage is further increased, the current decreases and the ammeter pointer tries to indicate negative values ​​and the voltage on the battery rises sharply. Is reverse induction charging? Now have other capacitors for HV ferroresonance. Unfortunately, the Tvs are destroyed in series by the high voltage if triggered once. Greetings Sven

Von Samsung Mobile gesendet

-------- Ursprüngliche Nachricht --------
Von: "[email protected] [EVGRAY]" <[email protected]> 
Datum:02.05.2018  00:35  (GMT+01:00) 
An: [email protected] 
Betreff: Re: AW: Re: AW: Re: AW: Re: AW: Re: [EVGRAY] Capacitor and how to reach the capacity. 

I don't understand ?  schematic ? but if you say current went to zero and battery voltage went up it is ,,,



(H)


---In [email protected], <s.friedrich@...> wrote :


Hello Hector, I think you've written a lot, but it's not an easy topic and hard to understand. I have a variac on the diode plug is powered by the Phenom when I have increased the charging voltage that the current at the moving iron of 2Ampere wanted to below 0 and voltage on the battery increased sharply. Is this the reverse induction charge ??? Greetings Sven


Von Samsung Mobile gesendet


-------- Ursprüngliche Nachricht --------
Von: "arkresearch@... [EVGRAY]" 
Datum:29.04.2018 03:14 (GMT+01:00) 
An: [email protected] 
Betreff: Re: AW: Re: AW: Re: AW: Re: [EVGRAY] Capacitor and how to reach the capacity. 

 


me ?  I had Written all. the problem is you people don't read , but there are loopers out there that know the truth ,, that what I tell is the truth , yes even the tantra and the conspiracy looking stuff ! 

Not my fault 99.999? of you are in mental jerkoff dimension  ! i have wrote several looping secrets and no one reads ....and the ones who know may not tell ....

but is quite factual ... ( they know its true ) 


(H) 





---In [email protected], <schoonersolsticemoon@...> wrote :

Sven
As you understand the Transverter better, I can only hope to replicate your pioneering work. 
Hector knows all about this, but seems reluctant to speak to us as a group, being the great unwashed masses, that we are.
I have this large three phase transformer that has no cross referencing data, yet it looks like it should be likely to perform in some fashion, being everything that was hooked to, it is quite high voltsge, such as diodes, and the like.
It is from a satelite station, built by the government, and placed in Toronto's waterfront. It was scrapped six, or seven, years ago, because, all of a sudden, the real estate is so valuable on the water front.
I knew somebody whose nephew had a truck, and the job of taking it all away.
So after listening to Hector all those years, and believing him, I was able to stroke off another couple of things on the list of things, to look out for, that would be useful for our experiments.
The most difficult thing has been storing, and moving, all these bulky, heavy things, especially in Toronto, where each square meter of land is worth so much a month.
Anyway all is good, and I follow your work with excitement.
Cheers Warren
Sent from Yahoo Mail on Android

On Sat, Apr 28, 2018 at 8:37 AM, s.friedrich@... [EVGRAY]
<[email protected]> wrote:
 
Hello Warren,

Capacitors that withstand high voltages with large capacity is more difficult to get, just like semiconductors that can withstand high voltages, starting at 1.6KV it is slowly getting more expensive even in the used market. laughing

I have now 10μF capacitors from old stock 3.15KV designed in continuous operation, which are 4x the size of the 1200V 15μF capacitors I have. The dielectric must be thicker here and the plate surface probably too. I would like to know if it makes a difference in resonance and Q-factor.

Sometimes I think that the modern capacitors are not the same as Hector with the huge old capacitors I've seen in some pictures.
Or I have already achieved everything and only too cowardly to charge my batteries directly via the diode plug to use the energy successfully.

About the new heavy very efficient Variac I have set the charging voltage of the diode plug stepless and I noticed that the power suddenly became negative. The pointer of the moving iron measuring device then went below 0 and the voltage on the batteries rose sharply, which I found very strange.

Nevertheless I would like to increase the Q-factor by higher impedance further and over the coupling capacitors to the diode plug side 2 suppressor diodes a 440V breakthrough voltage in series switch so that at 880 to max. 950V is shorted there if not enough energy is removed.

I noticed that the voltage drops due to larger discharge capacitors and does not even rise that much, so I wanted to lower the voltage in the extraction circuit a bit to protect the components so that I could work in the transverter with max. Can drive voltage of 1.5 kv.

regards

Sven