Watch "Free Energy Generator Self Running Machine" on YouTube

https://youtu.be/89x3FZD8apUWell group, whats going on here?This is a story that has been in circulation since that energy conference in Boulder that Bedini attended, and showed a ohoto of some device, much larger, of course, that worked along the same lines, using a flywheel and capacitors.2 dc motors are coupled one being a generator, the other, a motor.One is also coupled mechanically to a third motor which acts as a generator lighting an led and also conected to a very specific value of capacitance.Does this generator /motor then drive mechanically, itself, plus those other two?There is that irksome observation that was made during the Doug Kone replication I did. Remember the ten motor voltage increase using daisy chain fwr cascading from one motor to the next.We are dancing around this thorny issue hoping it was just a delusion, yet this arrangement consisting of permanent magnets, copper coils, intermittent pulses, and capacitance keeps coming back to haunt us, not unlike what Hector discovered using the RV.These are all just apparatus, scratching at probing the same phenomena.By comparing and contrasting the various efforts, their methods, and observations, provided they are truthful, we start to zone in on why it is doing what we see.Actually, this is not so different from what Romero was doing, if only we could see that invisible elephant in the room around us.Cheers Warren
Sent from Yahoo Mail on Android

HI Warren
 Well, stranger things have happened! 
 Looks like fun to me and would take an afternoon to try it for yourself....note the comments calling it fake immediately as so it goes some people are really insulted, some are watching youtube ready to pounce right away...
 Looks real to me, maybe caps are pre-charged, I don't think so since as soon as he spins it it goes and lights that light....note the different size sprockets on the generators and note the single diodes to rectify....
 Could be real, could be another fake one who knows....
 ciaoKone

a transparent base might had gone better than a doble serrated z cardboard were a hall effect switch and flat battery may be hidden ,,,

well there is a solution  use 3 treadmill motors & try to do the same using proportional gear rations to the ones in the video & larger diodes ...
its similar to the RVA only using  DC motors ///

Warren that a invisible six foot  rabbit .
On Jan 15, 2018 2:35 PM, "[email protected] [EVGRAY]" <
[email protected]> wrote:

>
>
> a transparent base might had gone better than a doble serrated z cardboard
> were a hall effect switch and flat battery may be hidden ,,,
>
> well there is a solution  use 3 treadmill motors & try to do the same
> using proportional gear rations to the ones in the video & larger diodes ...
> its similar to the RVA only using  DC motors ///
> 
>

HI Hector and Warren and all
 That's just what I thought last night too-cardboard easy to hide stuff in, however if it does work like shown in , 3 t96V DC readmill motors would/should work just fine and probably even better -  which I know Warren has a bunch of those packed away somewhere...I think pulley sizes the only thing to play around with "if it will work"  
 maybe clean bearings and put in with spot of hi tech grease in each motor's bearings,  plus reduction ins width of motor brushes might cut draw down too a bit more if that is needed at all...also magnetic gears would be fun instead of belts...
 ciaoKone

Wow Kone, you have a razor brain!..."also magnetic gears would be fun instead of belts.".. ciaoKone

Addendum: 

https://www.powertransmission.com/issues/0210/products.pdf https://www.powertransmission.com/issues/0210/products.pdf

If you use magnets for gears get strong ones I tried 1/4" x 3/4" they had 20 lbs pull but wouldn't turn the 3/4" shalf and had magnets set up for bearings on the shalf so really no friction.

This would be something for anyone that is interested in torque converters. Check out the YouTube channel "godspirals " and no it has nothing to do with religion. This guy Chris modifies torque converters and has some pretty interesting out comes with his designs.

Hi Darrel
 Magnetic gears are so easy to make, just need drill press, some magnets and hole saws of diameters you need plus cut discs of HMD plastic or out of wood even if you want... you don't need magnets in the shapes they show but.these manufactured ones look really nice....wonder about the price...
 ciaoKone

Hi Trois
 Thanks for the link to Godspirals channel where he takes apart automatic transmission torque convertors and thinks about what could be done with them (hard to understand him he talks so low and mumbly) but looking through his videos, this one seems really interesting since he compares the implosion tech of Schauberger and Clem to what is going on inside the torque convertor and talks at one time about 20KW worth of power happening because of the suction (??) 
 That simplified Clem motor video I posted a week ago or so using a torque convertor as the spinning chamber witht he PVC right angle pipes and pressuire washer nozzles showed that the chamber wanted to spin one direction much better and faster than the other, I didn't really know why and I have never looked inside a torque convertor but have worked on tons of cars in my life - it has always been a big chamber of fluid that has passageways that shift gears in an automatic transmission via the centrifigual force of the fluid flowing through the chambers and that is all I knew so this is very interesting to look inside of them and analyze what they can do and other uses for the them too such as Clem motor chamber..
 I really don't iknow what he is saying - have not studied it yet much, just spent 10 minutes is all so far but I like it a lot! Thanks again
 Here is link to one of his videos where Clem motor and Schauberger are mentioned:
 https://www.youtube.com/watch?v=hRvhc_GLtxU https://www.youtube.com/watch?v=hRvhc_GLtxU
 ciao
 Kone