Body
Kone,
Any SS will vibrate up. It's hi internal strength compared to say copper or aluminum is stronger to feel the energy from.
Exactly how:
We measure the inside diameter of the tube or SS can, and then subtract that value from the resonant field size, and then we set our calipers to the difference and touch it on the inside of the can with the outer jaw extending out in the air to contact the resonant dimension. The two frequencies mix together as a sum, and both then start to draw energy from the resonant background field.
SS Can ID = 4.792 inch
Background field disc diameter = 5.126"
Set the caliper to 5.126 - 4.792 = 0.334"
Stick your hand inside the can. Touch the caliper to the inside holding it at 90 degrees to the surface.
Field comes up instantly.
Calculate the take down frequency as 1/9 of 0.334 = 0.037"
Set the calipers to 0.037" and repeat until the field drops.
------------------------------------------------------------------------------------
I actually made a mistake, but it still works at the 2x value.
To get the correct one we have to cut .334 in half as its value is shared on both sides of the can, but that distance is a bit too small to release easily and it is more intense on the head.
----------------------------------------------------------------------------------
So the energy Source is the area of a flat disc, which is the geometry for electrical field, a 2D force like a capacitor plate.
It can be expanded by 2x diameter, and the frequency will rise by the area by 4x.
You can tap it at any of its octaves of 4x expansion of frequency.
Working a mass field, or a magnetic field, requires an 8x octave because it is a volume.
http://www.resonantfractals.org/Magnetic_Resonance/Magnetic_Resonance.html http://www.resonantfractals.org/Magnetic_Resonance/Magnetic_Resonance.html
Dave L