Body
Hector,
I wouldn't call it a mistake, advantage of air inductors, they don't
overheat! Only mistake was the stroke.
Also your sink was probably very loud before it became too hot.
Have to go to longitudinal for high power, overlay the magnetic on the
high voltage- yep, doesn't work with transverse. One is close when
everything gets bristly. I have heard this happens with lightening, and
if you feel the bristles and hear the hiss your probably about to be way
to close to something you shouldn't be..
I am going about it the other way though, low voltage and those spikes
are too fast to harvest direct, need moderation.
Striping out the E is interesting though as one can hold a little magnet
from across the room and turn it ever so slightly then the squealing
changes tone, not sure how long the core will last with this earbleed.
Interesting how much power a transistor can switch without heat...
On 5/26/2019 3:11 PM, [email protected] [EVGRAY] wrote:
>
>
> Don Smith mistake :
>
> series exciter coil ( a few turns ground referenced ) 25 amps !
>
> series 38KV secondary coil with .0025amps !
>
> he multiplied the primary current by the series secondary voltage !
>
> .95 megawatt! and he did that a few times !
>
> try coil winding an iron kitchen sink and you will probably get more
> OU pulsing it that than from Dons Circuit ! .
>
> my experience ( i was better off coil banging the kitchen sink ! )
>
> the problem is it overheated in no time alike an
> induction pot and it degraded to non OU really fast !
>
> (H)
>
>
>
>
> ---In [email protected], <schoonersolsticemoon@...> wrote :
>
> Mike
>
> When I was doing the Don Smith experiments, I felt I was working alone
> in the dark. Nobody answered my posts. It was like I was on a spam list.
> That is strange, I sure would have benefitted from your experience..
> I ended up moving all of a sudden from the city, to the country,
> putting a stop on my experiments for over a year.
> My new shop is just starting to be usable, though there is stone
> pointing still to be done.
> Cheers Warren
>
> Sent from Yahoo Mail on Android
> <https://go.onelink.me/107872968?pid=InProduct&c=Global_Internal_YGrowth_AndroidEmailSig__AndroidUsers&af_wl=ym&af_sub1=Internal&af_sub2=Global_YGrowth&af_sub3=EmailSignature>
>
> On Sun., 26 May 2019 at 2:38 p.m., Mick mkjekyll@... [EVGRAY]
> <[email protected]> wrote:
>
>
> Warren,
>
> If you recall I sent you a vid of me shorting big caps being
> charged wirelessly...
>
> I will try to explain again for some of the people who care.
> With these devices they are using resonance as much as Rf uses
> resonance but as Tesla said one must suppress the E field and
> match the magnetic. As Norm said the power of a Tesla coil is
> in the ground side, the magnetic and using that side, this is
> what a Smith chart shows when changing tuning impedance on a
> transmission line when one is on the magnetic or electric
> side. As Don Smith said one must build the unit in parts to
> understand the process. Best way to understand is to build
> two Tesla Coils using one to step up and the other to step
> down. Smith uses an isolation transformer to cancel the
> common mode so as to get useful energy on the other side that
> will not inadvertently cook electronics such as an inverter.
>
> I am not going to give any more info presently as it's
> pointless unless one is willing to experiment as the tuning
> part gets complicated and has to do with other parameters I
> have already made mention of but doubt anyone "heard" me.
>
> On 5/26/2019 11:02 AM, Warren Keillor schoonersolsticemoon@...
> <mailto:schoonersolsticemoon@...> [EVGRAY] wrote:
>>
>>
>> Mick
>>
>> The ferrite is just the transformer core for high frequency.
>> I bet one could easily use Metglas laminates for the same
>> purpose.
>> I didn't know about you Don Smith experiments. I sure could
>> have used some advice trying to get as far as Kurt is doing.
>> He was mentored by Zilano a number of years back, when she
>> was still on the net.
>> Zilano was so peursued by nasty trolls, and just said f**kit,
>> and having her steady 16 KW outfit, just raises her horses,
>> on her farm, unplugged from the rest of the planet.
>> I'll give your address to Kurt.
>> Cheers Warren
>>
>> Sent from Yahoo Mail on Android
>> <https://go.onelink.me/107872968?pid=InProduct&c=Global_Internal_YGrowth_AndroidEmailSig__AndroidUsers&af_wl=ym&af_sub1=Internal&af_sub2=Global_YGrowth&af_sub3=EmailSignature>
>>
>> On Sun., 26 May 2019 at 1:43 p.m., Mick mkjekyll@...
>> <mailto:mkjekyll@...> [EVGRAY]
>> <[email protected]> <mailto:[email protected]>
>> wrote:
>>
>>
>> Warren,
>>
>> Very similar to my experiments I posted with caps. How
>> does on contact Kurt from Calgary?
>>
>> One has to be careful of this process deriving energy
>> from the ferrite as it throws fast neutrons!
>>
>> On 5/25/2019 6:33 PM, Warren Keillor
>> schoonersolsticemoon@...
>> <mailto:schoonersolsticemoon@...> [EVGRAY] wrote:
>>>
>>> https://www.youtube.com/watch?v=jvvnjTmwyFg&fbclid=IwAR1q6MJNZngHYIz_H5vFWKztjqTAfyxTxTd60jJyd2yPW5x_sRljUf73ekM
>>> Hi guys
>>> Kurt is back working on Don Smith/ Kapanadze/Zilano
>>> device, and finally making progress.
>>> It is so damn hard. I have tried, and tried, getting
>>> duds, but Kurt has found a really neat trick to tune
>>> resonance.
>>> Cheers Warren
>>> Sent from Yahoo Mail on Android
>>> <https://go.onelink.me/107872968?pid=InProduct&c=Global_Internal_YGrowth_AndroidEmailSig__AndroidUsers&af_wl=ym&af_sub1=Internal&af_sub2=Global_YGrowth&af_sub3=EmailSignature>
>>
>