Body
On Sunday, May 26, 2019, [email protected] [EVGRAY] <
[email protected]> wrote:
>
>
> Don Smith mistake :well he was dieing of brain problems
>
> series exciter coil ( a few turns ground referenced ) 25 amps !
>
> series 38KV secondary coil with .0025amps !
>
> he multiplied the primary current by the series secondary voltage !
>
> .95 megawatt! and he did that a few times !
>
> try coil winding an iron kitchen sink and you will probably get more OU
> pulsing it that than from Dons Circuit ! .
>
> my experience ( i was better off coil banging the kitchen sink ! )
>
> the problem is it overheated in no time alike an
> induction pot and it degraded to non OU really fast !
>
> (H)
>
>
>
>
> ---In [email protected], <schoonersolsticemoon@...> wrote :
>
> Mike
>
> When I was doing the Don Smith experiments, I felt I was working alone in
> the dark. Nobody answered my posts. It was like I was on a spam list.
> That is strange, I sure would have benefitted from your experience..
> I ended up moving all of a sudden from the city, to the country, putting a
> stop on my experiments for over a year.
> My new shop is just starting to be usable, though there is stone pointing
> still to be done.
> Cheers Warren
>
> Sent from Yahoo Mail on Android
> <https://go.onelink.me/107872968?pid=InProduct&c=Global_Internal_YGrowth_AndroidEmailSig__AndroidUsers&af_wl=ym&af_sub1=Internal&af_sub2=Global_YGrowth&af_sub3=EmailSignature>
>
> On Sun., 26 May 2019 at 2:38 p.m., Mick mkjekyll@... [EVGRAY]
> <[email protected]> wrote:
>
>
> Warren,
>
> If you recall I sent you a vid of me shorting big caps being charged
> wirelessly...
>
> I will try to explain again for some of the people who care. With these
> devices they are using resonance as much as Rf uses resonance but as Tesla
> said one must suppress the E field and match the magnetic. As Norm said
> the power of a Tesla coil is in the ground side, the magnetic and using
> that side, this is what a Smith chart shows when changing tuning impedance
> on a transmission line when one is on the magnetic or electric side. As
> Don Smith said one must build the unit in parts to understand the process.
> Best way to understand is to build two Tesla Coils using one to step up and
> the other to step down. Smith uses an isolation transformer to cancel the
> common mode so as to get useful energy on the other side that will not
> inadvertently cook electronics such as an inverter.
>
> I am not going to give any more info presently as it's pointless unless
> one is willing to experiment as the tuning part gets complicated and has to
> do with other parameters I have already made mention of but doubt anyone
> "heard" me.
> On 5/26/2019 11:02 AM, Warren Keillor schoonersolsticemoon@... [EVGRAY]
> wrote:
>
>
>
> Mick
> The ferrite is just the transformer core for high frequency.
> I bet one could easily use Metglas laminates for the same purpose.
> I didn't know about you Don Smith experiments. I sure could have used some
> advice trying to get as far as Kurt is doing.
> He was mentored by Zilano a number of years back, when she was still on
> the net.
> Zilano was so peursued by nasty trolls, and just said f**kit, and having
> her steady 16 KW outfit, just raises her horses, on her farm, unplugged
> from the rest of the planet.
> I'll give your address to Kurt.
> Cheers Warren
>
> Sent from Yahoo Mail on Android
> <https://go.onelink.me/107872968?pid=InProduct&c=Global_Internal_YGrowth_AndroidEmailSig__AndroidUsers&af_wl=ym&af_sub1=Internal&af_sub2=Global_YGrowth&af_sub3=EmailSignature>
>
> On Sun., 26 May 2019 at 1:43 p.m., Mick mkjekyll@... [EVGRAY]
> <[email protected]> <[email protected]> wrote:
>
>
> Warren,
>
> Very similar to my experiments I posted with caps. How does on contact
> Kurt from Calgary?
>
> One has to be careful of this process deriving energy from the ferrite as
> it throws fast neutrons!
> On 5/25/2019 6:33 PM, Warren Keillor schoonersolsticemoon@... [EVGRAY]
> wrote:
>
>
>
> https://www.youtube.com/watch?v=jvvnjTmwyFg&fbclid=IwAR1q6MJNZngHYIz_H5vFWKztjqTAfyxTxTd60jJyd2yPW5x_sRljUf73ekM
>
> Hi guys
> Kurt is back working on Don Smith/ Kapanadze/Zilano device, and finally
> making progress.
> It is so damn hard. I have tried, and tried, getting duds, but Kurt has
> found a really neat trick to tune resonance.
> Cheers Warren
> Sent from Yahoo Mail on Android
> <https://go.onelink.me/107872968?pid=InProduct&c=Global_Internal_YGrowth_AndroidEmailSig__AndroidUsers&af_wl=ym&af_sub1=Internal&af_sub2=Global_YGrowth&af_sub3=EmailSignature>
>
>
>