Body
Same thoughts! I own a fallen down in house a days drive past this.
I need to investigate it as to whether or not I res-erect it.
As well have some water sales with an ice cream company that sells on the net.
They are in the same general area. So maybe some wandering , curious now!?
I guess town hall and library maybe a good place to start!
You guys with all the reading info , links, sites! wow
Time!!!
Something else to ad.
Several times in my life experience I have encountered people of different
belief values.
Once I was coming out of St.Michael's hospital in Toronto, as my wife had to go to day surgery.
It was a little cold on this day maybe -2c . I had gotten a sandwich and coffee while waiting.
I went outside and seen an older lady laying on a cardboard box over a heat vent.
I reached in my pocket for some change when a young man stopped me.
He said she owns that building! Sooo?
Another one.... this guy was panning under an over pass. I went to a coffee shop close for a coffee
on the drive through. I said to the cashier the guys maybe hungry , can you give me some thing
I can pass the guy.
She said well that's his new truck parked right there. A 2016 silverado.
He has been here for two years and insults us for working.
So its not that I am trying to make the story stick , I just see a maybe.
________________________________
From: [email protected] <[email protected]> on behalf of Mick [email protected] [EVGRAY] <[email protected]>
Sent: March 31, 2019 1:31 PM
To: [email protected]
Subject: Re: [EVGRAY] ram pump
Bart,
I have a feeling there is something more to this Mathews deal, the reason I said halfshit crazy. I don't know where he lived but one of you guys up north may be close enough to his former location to do some digging. maybe there are some amazing writings and things stashed away after this mans death.
https://hello-earth.com/arthurhmatthews/thewalloflight/arthurhmatthewsthewalloflightpage1.html
https://www.youtube.com/watch?v=Y5gBXDvhXBs
On 3/30/2019 12:41 PM, bart woodard [email protected]<mailto:[email protected]> [EVGRAY] wrote:
Ya Mick! The guy had a world with in a world with in with in and so on!
HaHaHaHa! You should see some of these buildings that were his office admin and what not.
I will try to droid it on video this summer. Shame to say some of them are now deemed unsafe.
If you google walk along the falls (Niagara Falls) Cdn side . Once you get to the power gen station
look across from it along the river , the building has pillars , very elaborate like designs.
Must be 20,000 sq on a guess. I wanted to show Kone but we ran out of time.
The supervisor did come to our little meetings and asked if I would like a personal tour,
I however never found the time. Shameful like really that I never, now I wish!
Never heard of this Mathew character?
THIS IS NUTS ! lol
Guess where I going ! lol
https://blog.world-mysteries.com/guest_authors/doug-yurchey/son-of-tesla/
[https://blog.world-mysteries.com/wp-content/uploads/2013/08/sonofTesla_icn.jpg]<https://blog.world-mysteries.com/guest_authors/doug-yurchey/son-of-tesla/>
Son of Tesla - World Mysteries Blog<https://blog.world-mysteries.com/guest_authors/doug-yurchey/son-of-tesla/>
Son of Tesla by Tray Caladan, aka Doug Yurchey This article exposes what may be a very large secret within the family of Nikola Tesla. Tesla was never known to have had a child, marry or have had relations. He was too obsessed with his work, so the story goes. Nikola was the classic loner.
blog.world-mysteries.com
________________________________
From: [email protected]<mailto:[email protected]> <[email protected]><mailto:[email protected]> on behalf of Mick [email protected]<mailto:[email protected]> [EVGRAY] <[email protected]><mailto:[email protected]>
Sent: March 30, 2019 2:39 PM
To: [email protected]<mailto:[email protected]>
Subject: Re: [EVGRAY] ram pump
Bart,
Thanks for the post that is amazing Dr Tesla built that. There was the book by the Canadian guy, Mathews, who inferred he was Teslas son. Allegedly he was a child helper of Tesla but I have never verified this and the guys writings seem halfshit crazy. He also claimed there were other towers built in Canada along the lines of the Magnifying transmitter. It would be nice to know what Tesla builds are still standing such as Decew Falls.
Hydropower I keep coming back to this sort of thing because it needs only a few feet of head and the larger slower RPM versions allow for fish to travel back and forth without fish ladders.
If you still had your concrete company the below would be really cool to make, the first one spins too fast though and will not allow fish.
https://www.youtube.com/watch?v=gY3p2e1-kN4
https://www.aquazoom.com
http://www.zotloeterer.com/welcome/
On 3/30/2019 8:07 AM, bart woodard [email protected]<mailto:[email protected]> [EVGRAY] wrote:
James
Once again I am out of touch! looks like a worldly change your chasing!
Tesla (at times) , had a never ending supply of finances and elements ,
components as well as machining as every one wanted to be part of his next as well I am sure.
Would be nice to look at hold an inspect some of his builds.
Like the resonating device he had on the building destroying itself!
Was it connected to its particulate in a way that we were not aware of?
Or just sitting there resonating as some believe.
Are you against earth grounds in your quest?
One of His first project is in my neighbor hood and I drive by it almost every day.
Its a small water wheel station providing power for 200 +- houses.
When the grid would go down , there was a strip of houses powered by this location that
stayed up and running. Mine was one.
I believe it was his test project before the NF. I have not looked into it though.
http://www.technology.niagarac.on.ca/people/mcsele/interest/decew-falls-generating-station/
Bart
________________________________
From: [email protected]<mailto:[email protected]> <[email protected]><mailto:[email protected]> on behalf of James Glinski [email protected]<mailto:[email protected]> [EVGRAY] <[email protected]><mailto:[email protected]>
Sent: March 29, 2019 3:10 PM
To: [email protected]<mailto:[email protected]>
Subject: [EVGRAY] ram pump
I'm looking at don smiths work and taking it a step or goal or gate at a time .right now its the source of voltage and frequency that's on the table .and trying to keep it simple .a joule thief with out a core runs fast enough but its only about 50 volts out so I need to raise it .thinking a Cockcroft multiplying set up with diodes and caps might work .but where I would like to be is that wire and coil part the second gate .he said that chose your frequency and wire according and devide another into one quarter length one for the first coil then for the final coils the twins that are wound clock and counter clock wise .I want to be to the point of inserting the L 1 into the L2 to see the turning with out the caps .that would put me 2/3 ed the way through the system with validation of success up!to that point . but I was thinking .any radio wave frequency from the source can ring it .just to see it work .but I'll not digress I'm trying to get the beginning going .with out a store bought hi voltage neon trans former .its funny you can get the volts but no frequency or frequency and no volts what a pain in the as it is to get both to gether in one place .and stable .don showed us how to tune it by inserting part of the L1 into the L2 not needing caps to find resonance ...so wire is cheap as hell .... why not see it in action .its just a old way of tuning AM radios but with power . and the less soild state the less to burn up .the k.I.s.s principal.
On Friday, March 29, 2019, bart woodard [email protected]<mailto:[email protected]> [EVGRAY] <[email protected]<mailto:[email protected]>> wrote:
James , you are trying to get some thing in the 40kHz range. Its been like forever since I have played.
I learned it all fast and am loosing it fast as its some thing that really needs repetitive time and efforts,
as well changes daily ,best to keep notes on these I find. Now a day I am down to an old fluke multi-meter.
With a scrap of wire copper for measuring amps. So I guess it would be size and time.
Its really just any and all. I never read Don Smith work so I do not know his principle.
I remember scanning some thing on him faintly. On quick glance and poor memory but I remember
a large device . It was a schedule when I was submerged in other projects.
As far as lighting needs I am going the easiest route with the best no maintenance percentile.
I had designed an led t8 in the rough in 2001. Shown it to some Chinese guys in TO.
Got a discount ! lol I did The New Roads GM dealership in MarkHam it looked sharp at night.
https://www.google.com/maps/uv?hl=en&pb=!1s0x882ace1c8a1459f3:0xdc88c21e217b702d!2m22!2m2!1i80!2i80!3m1!2i20!16m16!1b1!2m2!1m1!1e1!2m2!1m1!1e3!2m2!1m1!1e5!2m2!1m1!1e4!2m2!1m1!1e6!3m1!7e115!4shttps://lh5.googleusercontent.com/p/AF1QipPQjeDnJrgYchXc1UtBmYV7prsnQ4Eto_zfSXFz%3Dw260-h175-n-k-no!5snew+roads+dealership+in+Markham+-+Google+Search&imagekey=!1e10!2sAF1QipPQjeDnJrgYchXc1UtBmYV7prsnQ4Eto_zfSXFz
If you grab a t8 and disassemble it you will see a cascading application. Can go from 220
to as low as you wish.
If I remember correctly at all they run 97 volt min @ .300 ma to trigger it.....
I do not remember the exact details any longer. Sorry
Bart:)
________________________________
From: [email protected]<mailto:[email protected]> <[email protected]<mailto:[email protected]>> on behalf of bart woodard [email protected]<mailto:[email protected]> [EVoing to go the GRAY] <[email protected]<mailto:[email protected]>>
Sent: March 28, 2019 9:43 PM
To: [email protected]<mailto:[email protected]>
Subject: Re: [EVGRAY] ram pump
What project are you working on James?
Herbal teas are nice at the end of the day.
Sent from my Bell Samsung device over Canada's largest network.
-------- Original message --------
From: "James Glinski [email protected]<mailto:[email protected]> [EVGRAY]" <[email protected]<mailto:[email protected]>>
Date: 2019-03-28 9:30 PM (GMT-05:00)
To: [email protected]<mailto:[email protected]>
Subject: Re: [EVGRAY] ram pump
I've found that the ferrite magnet rings run the frequency down to much for my uses .I'm only looking for around 40khz .haven't done anything yet .today I had to clean up and fix my meter and just tired from all the attempts this week with little to show for it ..but will do better .
On Thursday, March 28, 2019, bart woodard [email protected]<mailto:[email protected]> [EVGRAY] <[email protected]<mailto:[email protected]>> wrote:
Hi James,
I have a perfect memory, just no retainer value! lol
It was also 2012-2013? I was working with the guy on over-unity.com<http://over-unity.com> .
Went to see him in South Carolina (another family trip) and helped he
in developing some advanced at the time lighting. I got a deal on used super caps
from Maxwell. So it was not really I only !
Problem was he has a case of clinical depression, communications were terrible.
He had over a million hits. He asked for me not to disclose his name.
He also kept in touch daily with Lasersaber
https://www.youtube.com/channel/UCIKzUKkh7XtnSYPW0AJb-9w
But he was the guy I mentioned on other posts in the past about he and his uncle
working on circuits for the rover. This guy was amazing , he developed timers
to power themselves by means of adding elements and popping them in the
oven for specific time periods. Collecting any of all values and pumping them straight
back in. He liked the small ferrite magnet rings . Would wind one side maybe
10 wraps with 18-20 gauge and across from it 100 wraps 28-32 gauge.
He threw in a pot , I think 10k maybe? and scoped it. I remember doing calculations on a 3200ma
for time run expediencies.
Still have some in boxes some wheres and was going to dig them out.
Honestly I left my better lab top in Finland and will get it back at the end of May.
Its got a lot of past projects on it. In the mean time I will sift through
my grocery bags of thumb drives. Now a day its easier to just order from China really.
As well eye sight has become a struggle. This is now old , so there may be better
available now.
https://www.youtube.com/watch?v=xzNfXcN8HNY
[https://i.ytimg.com/vi/xzNfXcN8HNY/maxresdefault.jpg]<https://www.youtube..com/watch?v=xzNfXcN8HNY>
ant chip - YouTube<https://www.youtube.com/watch?v=xzNfXcN8HNY>
chip the size of a piss ant runs 59 leds full bright. runs days to 0.15 vdc cutoff.amazing but near impossible to solder ..used smd to dip converter to use it.
www.youtube.com<http://www.youtube.com>
So sorry not back to speed yet ,but working on it!
Hope this helps any.
Bart:)
________________________________
From: [email protected]<mailto:[email protected]> <[email protected]<mailto:[email protected]>> on behalf of James Glinski [email protected]<mailto:[email protected]> [EVGRAY] <[email protected]<mailto:[email protected]>>
Sent: March 28, 2019 4:14 PM
To: [email protected]<mailto:[email protected]>
Subject: Re: [EVGRAY] ram pump
What Joule thief. Cross that ? I've recently been looking at them .and the ones with the core material don't get past 7 kHz it seen but a air core done like a normal straight coil form ? Well I got one going at 300 kHz .so I'm going to shorten it some and match it to several other wires then wind it .shooting for over 40 kHz then by using a 3055 on it and running it up to six volts I might get the out put at over 50 volts maybe much more .then use it in a don Smith energy extractor .with it resonance with the other wires the Joule thief being 1/4 wave length of the next coil then back down to the 1/4 wave length on the last two .to pull 12 volts from it .if this works it will be mostly coils and a 3055 no caps except the super caps at the end of the line .don used to do a sliding tuining coil in to coil system .brain dead simple way to hit resonance from coil to coil with out caps !! But here's the idea that came to me don gave us a way to tune the first two coils by sliding ! Well what will happen if the last coil was another slider ? Could we hit resonance with all three ??.I'm going to run some small test to see effect .the way you know you got resonance between the first and second coil is sparks though a spark gap .the third well maybe a light blub .don't know but with out resonance you got zip .
On Mar 28, 2019 1:36 PM, "bart woodard [email protected]<mailto:[email protected]> [EVGRAY]" <[email protected]<mailto:[email protected]>> wrote:
YUP ! BACK to the country!! lol
I had once the perfect place. Funny how some times it can be right in front of you. lol
Like I said it reminds me of a joule thief. I have been able to crank 1000 leds for 8 hrs on a aa.
Finical ,so stable 100 with multiple apps perhaps! Really you could work this to any level!
The reading pile is piling up again!
________________________________
From: [email protected]<mailto:[email protected]> <[email protected]<mailto:[email protected]>> on behalf of James Glinski [email protected]<mailto:[email protected]> [EVGRAY] <[email protected]<mailto:[email protected]>>
Sent: March 28, 2019 1:58 PM
To: [email protected]<mailto:[email protected]>
Subject: Re: [EVGRAY] ram pump
You know if you had several in one steam and pumped the water up hill like a hundred feet the trip back could generate a lot of power though several generators coming back down ...a couple of old boys made a water generator that was like bucket's on a chain ...looked like a escalator but it held the water all the way down to the ground they said it can be used by people with a small stream .
On Thursday, March 28, 2019, bart woodard [email protected]<mailto:[email protected]> [EVGRAY] <[email protected]<mailto:[email protected]>> wrote:
Thanks Bob
Most likely my lack of computer skills, as I can not seem to get any vids to run............
Like your Murphys law precursor, seems rightfully applied.
Looks like you have given this some respectful efforts!
Ongoing accumulated head pressure deserves some mindful respect as well, thanks for the heads up!
I will need to find a corner chair with a light! lol
Bart:)
________________________________
From: [email protected]<mailto:[email protected]> <[email protected]<mailto:[email protected]>> on behalf of Bob Paddock [email protected]<mailto:[email protected]> [EVGRAY] <[email protected]<mailto:[email protected]>>
Sent: March 28, 2019 12:37 PM
To: EVGRAY YahooGroups
Subject: Re: [EVGRAY] ram pump
On Thu, Mar 28, 2019 at 10:19 AM bart woodard [email protected]<mailto:[email protected]>
[EVGRAY] <[email protected]<mailto:[email protected]>> wrote:
> I friend over the Christmas holidays has asked me to help him
> build a ram pump. I think this is another one of those amazing
> inventions.
Yes. Been around for hundreds of years.
They are also known as Thromp Pumps or Klack Pumps from the sound they make.............
I wrote about them at the link below. Took a Check-Vale apart and put
it together backwards as the compression valve.
Reset was a 4" drain pipe as feed and some 1.5" fittings with a 1.............5"
output pipe.
Bellocq, Toribio: Compression Wave Pump. Where we are applying the
concepts of Resonance and other electrical properties to plumbing.
https://web.archive.org/web/20110813074433/http://www.unusualresearch.com/Pump/bellocq.htm
Mr Bellocq's grandson sent me a video of it running:
https://web.archive.org/web/20100308021211/http://www.archive.org/details/BobPaddockTonibioBellocqCompressionWavePumpinoperation
> Always wondered why more of them are not built
> to run generators.
Flood destroyed mine. Moved so never rebuilt.
I did learn a Health Respect for compressed water and air!
Almost lost the fingers of my right had,
and almost had my head caved in by a pump that broke look when tried
to bleed off some air in the pipe.
The Preface to Murphy's Law:
_We, the willing, Lead by the unknowing.
__Are doing the impossible for the ungrateful… We have done so much for so long…
___With so little… We are now qualified to do anything…
____With nothing… Forever!