Re: [EVGRAY] ram pump

Body

James,

I think I asked you if the reference book you received on Don Smith had
to do with magnetic flux or only the E field RF side, glad to hear it
does.  Rick is a good guy but his previous explanation was a bit
limited, perhaps it has changed with the book.  I have built a system I
was using for wireless charging of caps running at about 1mHz and loose
coupled on E side or top load side could produce a power gain but but
the time one looked at packing density and mutual coupling getting over
2:1 is a big hassle.  As Tesla pointed out with radio suppress the E
wave and use the magnetic side.  As Norm also mentioned when building
Tesla coils one has to use thick grounding wire.  So basically it's a
Tesla coil that does not waste time sparking and one pulls the energy
off the magnetic or ground side of the circuit.  By loading the top with
the right capacity the bottom part can pump, get it "top load".  Off the
bottom part can be multiple coils as magnetic flux will go through lead
without bother, it cannot be stopped but it can be guided around
things.  You will need a tunable spark gap to adjust for the highest
gain, then impedance match to the step down coil side, there is also a
multiplying effect when feeding negative biased spikes to ground so be
careful.  Observe all high voltage precautions, use electricians lineman
gloves, the long ones that go up the arm like dishwasher gloves.  Keep
one hand behind back while tuning or near the thing live.   The hertz
side is pretty safe due to skin effect, the magnetic side can kill you! 
What people do not get at all is the power of the 1/4 wave magnetic when
highly DC biased can charge things nearby too and zap...

Good luck with your efforts, but when you get to the point of hooking to
your house be sure and decouple the DC with large caps as those spikes
will kill pretty much all appliances.  Check with smaller circuits with
functional GFI first!

On 3/30/2019 3:15 PM, James Glinski [email protected] [EVGRAY] wrote:
>  
>
> I never knew that when you use a coils like a Tesla coil and up the
> voltage to the sky that the magnetic part doesn't follow the standard
> form .I mean if you use a transformer you don't shift the watts by
> changing the amp to volt ratio  and you can go up in volts shifting
> the amps down but the magnetic side just goes nuts thought the roof
> .look at a plasma glob no voltage coming thought the glass but the
> magnetic flux is huge ! Not what's associated with the 10 watts you
> run the thing with .its more like 100 ooo watts .of flux intensity
> .cough me of guard a real mental sucker punch .that should be there .
>
> On Saturday, March 30, 2019, bart woodard [email protected]
> <mailto:[email protected]> [EVGRAY] <[email protected]
> <mailto:[email protected]>> wrote:
>
>      
>
>     SO  COOL!!!
>                           I can only envision it as I am not up to
>     speed on Don Smith but have gotten here in the past!
>     At least for a temporarily like  period. Its now when the old guy
>     would tap me on the shoulder and
>     say "  Now you can apply more builds with principles " lol
>     Good for you James.
>      JB s  description on the  Tesla  impulse circuit , taking it off
>     up to eight times from the node with out effecting the
>     input!
>     The old guy "Uncle" I called him. Told me , its like a gas this
>     magnetic field , the more you push the more you can work.
>     But be careful as it can also reach its limits , he said.
>     He had me build some hand wound coils with a weigh scale , with
>     exact values. The sizes could be different
>     but had to weigh the same. Then we did a lot of fun experiments.
>     Have Fun!  Sky s the limit!
>
>     ------------------------------------------------------------------------
>     *From:* [email protected] <mailto:[email protected]>
>     <[email protected] <mailto:[email protected]>> on behalf
>     of James Glinski [email protected]
>     <mailto:[email protected]> [EVGRAY] <[email protected]
>     <mailto:[email protected]>>
>     *Sent:* March 30, 2019 4:39 PM
>     *To:* [email protected] <mailto:[email protected]>
>     *Subject:* Re: [EVGRAY] ram pump
>      
>      
>
>
>     Oh sorry Bart I didn't answer your question .yes Im In to earth
>     grounds there three I. This system and one is hi voltage . if a
>     citizen band radio was hi voltage it would work real good being
>     crystal with hi Q resonance value .but I might take a run at it
>     anyway I've got a old one a friend gave me and all I'd have to do
>     is tune a wire and a just by cutting bits off the end to reach the
>     highest voltage ..that would be putting the node on the tip .or
>     just buy a SWR meter and do it .then use three turns and then
>     match that with a wire coil four times as large  ..to get the
>     volts up many turns like 250 to get something out of it .the
>     another twin counter and clock wise coil set for amps and volts .
>     . I'm going to try to slide tune the last set to right over the
>     others may find out it will work that way .can't see why not ?.
>     On Saturday, March 30, 2019, James Glinski <[email protected]
>     <mailto:[email protected]>> wrote:
>
>         Hi Bart 
>         Yes I'm looking at don smiths work .with some new
>         understanding .his work is like john bedini s but a million or
>         more times magnified .its teslas original discovery . what I
>         was confused on was where was all this power coming from now I
>         know ..it comes when you have a hi frequency hi voltage source
>         and can get into the area of radio waves above 36 kHz .to
>         millions of cycles  .the thing I miss was we call it
>         electromagnetic waves .one part electric one part magnetic and
>         when you jump up the voltage like with a Tesla coil the
>         magnetic part amps up too!!! That's why he called it magnetic
>         resonance .he could of cared less about the voltage or
>         electrical transfer ...where we all seem to live ... It was
>         all about the magnetic application .!! So simple I couldn't
>         see it ..by upping the magnetic back ground he's greatly
>         disturbing the ambient back ground every .just like a gas
>         operated generator does ....but electronically ..and of course
>         theres the need for tuning it all the way though to the end
>         and dumping the final hi frequency component .keeping the 12
>         volt DC part ..well for now any way..when your in radio wave
>         frequency area the energy runs on the out side of the wires
>         ..funny if you bend the wires to sharp it runs off the bend
>         ..and out in to space ...I've recently learned that he used
>         the multiple many fine wire cables ..aka jumbo speaker wire
>         ..because of this effect the more wires the more surface area
>         to run on ..by using this wire and making the L1 and L2 out of
>         it and only using three turns on the L1 you can slide tune it
>         very  easily .no special hard to find caps needed . a flyback
>         transformer would be perfect for this but the frequency is to
>         low the natural frequently is around 15 kHz not in the radio
>         wave area but by pushing it with a tank circuit it could get
>         there .you don't even have to run it at hi power you just need
>         the combo of hi freq and hi voltage .don only used 3,000 vote
>         DC .but at hi freq. Boy this is really got me cranked up .I
>         mean finding out the logic of it and realizing its very much a
>         hi voltage hi freq pluse DC  AM radio !! And can it clones its
>         power to any receiver that's tuned to it .you could have a
>         hundred receivers and no drop in out put but a hundred times
>         the power out put .and just a lot of wire and source potential
>         . !! .cheap and doable .jim
>
>         On Saturday, March 30, 2019, bart woodard [email protected]
>         <mailto:[email protected]> [EVGRAY] <[email protected]
>         <mailto:[email protected]>> wrote:
>
>              
>             Ya Mick!    The guy had a world with in a world with in
>             with in and so on!
>             HaHaHaHa!   You should see some of these buildings that
>             were his office admin and what not.
>             I will try to droid it on video this summer. Shame to say
>             some of them are now deemed unsafe.
>             If you google walk along the falls (Niagara Falls) Cdn
>             side . Once you get to the power gen station
>             look across from it along the river , the building has
>             pillars , very elaborate like designs.
>             Must be 20,000 sq on a guess. I wanted to show Kone but we
>             ran out of time.
>             The supervisor did come to our little meetings and asked
>             if I would like a personal tour,
>             I however never found the time. Shameful like really that
>             I never, now I wish!
>             Never heard of this Mathew character?
>             THIS  IS  NUTS !    lol
>             Guess where I going !   lol
>             https://blog.world-mysteries.com/guest_authors/doug-yurchey/son-of-tesla/
>             <https://blog.world-mysteries.com/guest_authors/doug-yurchey/son-of-tesla/>
>             <https://blog.world-mysteries.com/guest_authors/doug-yurchey/son-of-tesla/>
>             	
>             Son of Tesla - World Mysteries Blog
>             <https://blog.world-mysteries.com/guest_authors/doug-yurchey/son-of-tesla/>
>             Son of Tesla by Tray Caladan, aka Doug Yurchey This
>             article exposes what may be a very large secret within the
>             family of Nikola Tesla. Tesla was never known to have had
>             a child, marry or have had relations. He was too obsessed
>             with his work, so the story goes. Nikola was the classic
>             loner.
>             blog.world-mysteries.com <http://blog.world-mysteries.com>
>
>
>
>             ------------------------------------------------------------------------
>             *From:* [email protected]
>             <mailto:[email protected]> <[email protected]
>             <mailto:[email protected]>> on behalf of Mick
>             [email protected] <mailto:[email protected]> [EVGRAY]
>             <[email protected] <mailto:[email protected]>>
>             *Sent:* March 30, 2019 2:39 PM
>             *To:* [email protected] <mailto:[email protected]>
>             *Subject:* Re: [EVGRAY] ram pump
>              
>              
>
>             Bart,
>
>             Thanks for the post that is amazing Dr Tesla built that. 
>             There was the book by the Canadian guy, Mathews, who
>             inferred he was Teslas son. Allegedly he was a child
>             helper of Tesla but I have never verified this and the
>             guys writings seem halfshit crazy.    He also claimed
>             there were other towers built in Canada along the lines of
>             the Magnifying transmitter.  It would be nice to know what
>             Tesla builds are still standing such as Decew Falls.
>
>             Hydropower I keep coming back to this sort of thing
>             because it needs only a few feet of head and the larger
>             slower RPM versions allow for fish to travel back and
>             forth without fish ladders.
>
>             If you still had your concrete company the below would be
>             really cool to make, the first one spins too fast though
>             and will not allow fish.
>
>             https://www.youtube.com/watch?v=gY3p2e1-kN4
>             <https://www.youtube.com/watch?v=gY3p2e1-kN4>
>
>             https://www.aquazoom.com
>
>             http://www.zotloeterer.com/welcome/
>             <http://www.zotloeterer.com/welcome/>
>
>
>
>             On 3/30/2019 8:07 AM, bart woodard [email protected]
>             <mailto:[email protected]> [EVGRAY] wrote:
>>              
>>             James
>>             Once again I am out of touch!  looks like a worldly
>>             change your chasing!
>>             Tesla (at times) , had a never ending supply of finances
>>             and elements ,
>>             components as well as machining as every one wanted to be
>>             part of his next as well I am sure.
>>                Would be nice to look at hold an inspect some of his
>>             builds.
>>             Like the resonating device he had on the building
>>             destroying itself!
>>             Was it connected to its particulate in a way that we were
>>             not aware of?
>>             Or just sitting there resonating as some believe.
>>             Are you against earth grounds in your quest?
>>             One of His first project is in my neighbor hood and I
>>             drive by it almost every day.
>>             Its a small water wheel station providing power for 200
>>             +- houses.
>>             When the grid would go down , there was a strip of houses
>>             powered by this location that
>>             stayed up and running. Mine was one.
>>             I believe it was his test project before the NF. I have
>>             not looked into it though.
>>             http://www.technology.niagarac.on.ca/people/mcsele/interest/decew-falls-generating-station/
>>             <http://www.technology.niagarac.on.ca/people/mcsele/interest/decew-falls-generating-station/>
>>             Bart
>>             ------------------------------------------------------------------------
>>             *From:* [email protected]
>>             <mailto:[email protected]> <[email protected]>
>>             <mailto:[email protected]> on behalf of James
>>             Glinski [email protected]
>>             <mailto:[email protected]> [EVGRAY]
>>             <[email protected]> <mailto:[email protected]>
>>             *Sent:* March 29, 2019 3:10 PM
>>             *To:* [email protected] <mailto:[email protected]>
>>             *Subject:* [EVGRAY] ram pump
>>              
>>              
>>
>>             I'm looking at don smiths work and taking it a step or
>>             goal or gate at a time .right now its the source of
>>             voltage and frequency that's on the table .and trying to
>>             keep it simple  .a joule thief with out a core runs fast
>>             enough but its only about 50 volts out so I need to raise
>>             it .thinking a Cockcroft multiplying set up with diodes
>>             and caps might  work .but where I would like to be is
>>             that wire and coil part the second gate .he said that
>>             chose your frequency and wire according and devide
>>             another into one quarter length one for the first coil
>>             then for the final coils the twins that are wound clock
>>             and counter clock wise .I want to be to the point of
>>             inserting the L 1 into the L2  to see the turning with
>>             out the caps .that would put me 2/3 ed the way through
>>             the system with validation of success up!to that point .
>>             but I was thinking .any radio wave frequency from the
>>             source can ring it .just to see it work .but I'll not
>>             digress I'm trying to get the beginning going .with out a
>>             store bought hi voltage neon trans former .its funny you
>>             can get the volts but no frequency or frequency and no
>>             volts  what a pain in the as it is to get both to gether
>>             in one place .and stable .don showed us how to tune it by
>>             inserting part of the L1 into the L2 not needing caps to
>>             find resonance ...so wire is cheap as hell .... why not
>>             see it in action .its just a old way of tuning AM radios
>>              but with power . and the less soild  state the less to
>>             burn up .the k.I.s.s principal.
>>
>>             On Friday, March 29, 2019, bart woodard
>>             [email protected] <mailto:[email protected]> [EVGRAY]
>>             <[email protected] <mailto:[email protected]>>
>>             wrote:
>>
>>                  
>>                  James ,  you are trying to get some thing in the
>>                 40kHz range.  Its been like forever since I have played.
>>                 I learned it all fast and am loosing it fast as its
>>                 some thing that really needs repetitive time and efforts,
>>                 as well changes daily ,best to keep notes on these I
>>                 find. Now a day I am down to an old fluke multi-meter.
>>                 With a scrap of wire copper for measuring amps. So I
>>                 guess it would be size and time.
>>                 Its really just any and all.   I never read Don Smith
>>                 work so I do not know his principle.
>>                 I remember scanning some thing on him faintly. On
>>                 quick glance and poor memory but I remember
>>                 a large device .  It was a schedule when I was
>>                 submerged in other projects. 
>>                 As far as lighting needs I am going  the easiest
>>                 route with the best no maintenance percentile.
>>                    I had designed an led t8 in the rough in 2001.
>>                 Shown it to some Chinese guys in TO.
>>                 Got a discount ! lol    I did The New Roads GM
>>                 dealership in MarkHam it looked sharp at night.
>>
>