Body
Please review this Patent.
United States Patent Application 20070296373
Kind Code A1
Lam; Dat D. December 27, 2007
----------------------------------------------------------
Conservation of Electrical Energy and Electro-Magnetic Power in Motor,
Generator, and Product Components
Abstract
A capacitor, inductor, and power line are arranged in a series parallel
combination tank circuit that operates over four quarters of a complete
cycle. During the first quarter cycle: power is applied to the tank
circuit, current flows through the inductor to the capacitor, current is
stored in the inductor, and the capacitor is charged. During the second
quarter cycle; current is released from the inductor as the capacitor
discharges current to another parallel inductor or resistive load.
During a third quarter cycle: current flows in the capacitor from the
opposite direction, the capacitor is charged, current pushes out from
the capacitor to the incoming power line, and current is stored in the
inductor. During the fourth quarter cycle: the capacitor discharges in
the opposite direction, current parallel to another inductor or
resistive load flows in the opposite direction, and the inductor
releases current to incoming power line.
----------------------------------------------------------
Inventors: Lam; Dat D.; (Spokane, WA)
Correspondence Name and Address: RICHARD DAVID KATZ
12440 MOORPARK STREET SUITE 11
STUDIO CITY
CA
91604-1260
US
Serial No.: 426571
Series Code: 11
Filed: June 26, 2006
U.S. Current Class: 318/727
U.S. Class at Publication: 318/727
Intern'l Class: H02P 1/24 20060101 H02P001/24
On 11/15/2018 10:51 AM, Mick [email protected] [EVGRAY] wrote:
>
> Sven,
>
> Excellent work!
>
> I was experimenting with a ferroresonant transformer with about 30
> volts or less at about one amp or less, more like 500 milliamps, and
> blew some very highly rated TVS diodes something like 600v 1000 amp so
> I imagine you have gone through your share of silicon parts. At least
> the TVS diodes saved the timer and comparator used for the pulse width
> adjustment.
>
> What is your reactive power/input power ?
>
> How do you intend to make use of the reactive energy, store in capacitors?
> If you have rotoverter use like this -
> https://en.wikipedia.org/wiki/Synchronous_condenser
>
>
> On 11/15/2018 3:11 AM, [email protected] [EVGRAY] wrote:
>>
>> Hello to all those interested, I have now built a push-pull inverter
>> for the transverter anti-drive to drive it. From 37 Hz 650Hz is fully
>> adjustable and the pulse width.
>> A simple square wave signal is generated and sent. It works
>> wonderfully. The interference is a problem when switching 350V peaks.
>> I have now wrapped all power lines with aluminum foil and this
>> one-sided grounded. The boards I will install in an aluminum housing
>> and also this ground, the disturbances are almost all gone. By
>> shielding, the energy is no longer emitted and remains in the lines
>> apparently, since the shielding, the high-power mosfets are very hot
>> although they are used at most 10%. The cut-off voltage at the drain
>> increases in the kilovolt range when the transverter is connected.
>> The complete line to Transverter is also shielded. I now wanted to
>> build an Energy Recovery Snubber to recycle that energy. First test
>> show that you can drive the transverter so much more efficient. I
>> have to build this inverter even more reliable or change.
>> Best regards
>> Sven
>>
>