Body
Hi Mick,
Well needless to say... you are charged lol!
All water from any where has different values with different mineral combinations.
So whether its been RO then distilled it will still continue with carrying its trace like (ghost) elements. You are only looking at ppm or parts per million.
Not parts per billion and so on. Some say parts per google!
Unfortunately most will be carcinogenic due to its weight like or charges needed to extend itself tho not all will.
Even so with the stirrer the vortex will create an implosion enhancing the ghost like values remaining.
The molecule will become broken down to several sizes smaller , lets say 5 times approximately or less or greater than.
The four principles of play come in effect.
The Four Fundamental Forces and their strengths
* Gravitational Force – Weakest force; but infinite range. ( Not part of standard model)
* Weak Nuclear Force – Next weakest; but short range.
* Electromagnetic Force – Stronger, with infinite range.
* Strong Nuclear Force – Strongest; but short range.
With in the molecule it has a characteristic tendency so as not to enhance its ph factor with straight on electrical simulated charges.
We can not for now mimic the frequency water likes to evolve to sustain itself at keeping it at a stabilized value with in.
So circuit wise or electronically it is only a short life the ph may be increased . Tho I have not ventured out lately.
Its been several years for me so forgive my sloppy answers on recalling the research done.
Magnetic values are best used for the best overall out come. The molecule stabilizes itself after a would be spike ( Brownian Motion).
Distilled that's acidic at 6.2 can be elevated to 7.4 after it hits 8.5 or so give or take.
It can stabilize itself to 7.4 which is where I like it to be for consumption.
Tap water, well water etc will go to ammonia like, say right up to 14- 15- ph.
Good for paint stripping lol.
So distilled @ 0 ppm will go to 3ppm or more as well as the ph increase.
I do not want to use RO as its values can be anywhere.
The clustering effect has all the values as in one make up volume.
So you get it all , all charges , but mostly enhanced as our body only keeps the larger values and discharges the unwanted ones .
We discharge positive and maintain negative values.
In another words you get it all good with the bad. But still better than a too high ph value as this can burn your cilia and enzymes
with all and good and bad acids in digestion values.
Our mitochondria will only accept values approx one micron , so water at five or more times smaller hydrates our cells more easily.
Thus delivering any value needed to cells requiring assistance.
Hope this has some value some-wheres lol
As I said its been a while.
Bart
PS A prof just showed up while I am typing this laughing at me .
He says to add that the sun feels symbiotic to earth as it senses we are out of sync so its releasing more flares.
I told him its the hydrogen intent! lol
________________________________
From: [email protected] <[email protected]> on behalf of Mick [email protected] [EVGRAY] <[email protected]>
Sent: November 10
Bart,
Your information including on your cat is very interesting. I have been using distilled water that is first softened and then RO then distilled beginning from my well. It has a similar "drying" effect as norms wholly water though not as pronounced.
Could you please provide more information on your experiments concerning distilled water and using the magnetic stirrer and how that alkalizes the water? The NMR and parahydrogen post if very long winded so difficult for me to get the gist of your presentation.
Thanks,
Mick
On 11/10/2018 10:37 AM, bart woodard [email protected]<mailto:[email protected]> [EVGRAY] wrote:
I use a magnetic stirrer with distilled and wait for the ph to rise, the results are immediate.
https://hannainst.com/hi190m-1-magnetic-mini-stirrer.html
Mini Magnetic Stirrer (115V) - HI190M-1 - Hanna Instruments<https://hannainst.com/hi190m-1-magnetic-mini-stirrer.html>
hannainst.com
Compact. Lightweight. This mini magnetic stirrer with plastic cover can stir up to 1 liter. Big power, small footprint. Perfect for any lab!
________________________________
From: [email protected]<mailto:[email protected]> <[email protected]><mailto:[email protected]> on behalf of Norman Wootan [email protected]<mailto:[email protected]> [EVGRAY] <[email protected]><mailto:[email protected]>
Sent: November 10, 2018 12:34 PM
To: [email protected]<mailto:[email protected]>
Subject: Re: Fwd: Fwd: Re: [EVGRAY] Norm's Magnetic Battery [2 Attachments]
No!� Bart, never got into that exotic element stuff!� Just followed those that were!
On 11/10/2018 10:42 AM, bart woodard [email protected]<mailto:[email protected]> [EVGRAY] wrote:
�
Hey Norm , your life's experiences have been fruitful!! Congrats!!
Have you ever played with table top combinations� such as thorium and fluoride or the molten salt combo?
On a hobbyist� basis approach?
Rossi likes to inject nickel/mag� powder so as I see to maintain his 1k output!.
________________________________
From: [email protected]<mailto:[email protected]> <[email protected]><mailto:[email protected]> on behalf of Norman Wootan [email protected]<mailto:[email protected]> [EVGRAY] <[email protected]><mailto:[email protected]>
Sent: November 9, 2018 3:12 PM
To: [email protected]<mailto:[email protected]>
Subject: Re: Fwd: Fwd: Re: [EVGRAY] Norm's Magnetic Battery [2 Attachments]
�
�
Mick! To answer the rest of your questions:� In that ARC process you have to use carbon rods to yield the carbon monoxide & hydrogen.� (carbon source) (arc is heat source).
Holy Water was interesting part of the Elemental Replication experiment. See:�
Elemental Replication ?
�
����� Around mid September I put together an electrolysis cell similar to the Miles Nickel Cold Fusion Cell with the goal of exploring the possibilities of making what is termed �Pristine Water�.�� This water which will be used by Homeopaths will have had all memory or information removed.� This is accomplished by recombining monatomic hydrogen and monatomic oxygen as generated in a properly designed cell.� This is the ultimate in purity since this is water with conditions at the time of original creation.� �Wholy Water�is a term coined by my dear friend and fellow researcher Joe Tyls of Vancouver, BC.�� After several weeks of successful operation producing water that had all the earmarks of a true �pristine water� a fellow researcher suggested using an alternate electrolyte.�� A solution was selected that contained 77 colloidal minerals as found in plants that are the easiest assimilated into the body.�� With the electrolyte changed the cell was put back into operation as before with a nice recombination burn and production of the sought after �pristine water�.���
The water produced in the recombination burn of the H-H-O was collected from a silica glass condenser into a silica glass beaker for sampling.� When you flipped several CCs of the water into your mouth and tried to swallow, there was nothing there.� Hmmmm!� We immediately tested the viscosity and surface tension of the water and found it to be far below human blood which means that the water diffused directly into the capillaries around the tongue therefore nothing there to swallow.� The two Doctor who were there were amazed. � To prove the theory as to information carried by water, we collected a sample of several CCs into a plastic lab cup instead of the silica glass beaker. When you flipped the several CCs into your mouth you had to immediately spit it out for it was pure taste of plastic. This water picks up signature of anything it comes into contact with.� That is why the Homeopathic Doctors wanted it for making their tinctures.��� (signature of a healing agent). ��� We had all the necessary instruments to evaluate the Pristine water. See: � https://en.m.wikipedia.org/wiki/Hemorheology
Hemorheology - Wikipedia<https://en.m.wikipedia.org/wiki/Hemorheology>
en.m.wikipedia.org
Blood viscosity is a measure of the resistance of blood to flow. It can also be described as the thickness and stickiness of blood. This biophysical property makes it a critical determinant of friction against the vessel walls, the rate of venous return, the work required for the heart to pump blood, and how much oxygen is transported to tissues and organs.
�� http://www.dynalenelabs.com/testing-services/thermal-testing/viscosity-rheology/?gclid=CjwKCAiA_ZTfBRBjEiwAN6YG4SdHu5bWZ9yHLBM9VNQ0TLl4tB1hOqMvR_dOEHNbGX6k_kDHHtb5xhoCgIgQAvD_BwE �������� https://en.m.wikipedia.org/wiki/Tensiometer
� https://hydramotion.com/en/technical/units-of-viscosity
I made an offer to the Doctors present that a small unit for production of a liter/day of Pristine Water via complete unit built of quartz glass could be had for $5,000. Apparently they were not that enthused as we thought!� Oh! Well!
I built numerous Pyramids of all sizes and the Orgone Accumulators and even the Cloud� Buster.�� The pyramid experiments were very interesting for real effects were shown.�� Never tested whether water would� break after treatment by either Orgone� or pyramid.��� The complete description of the 4 inch cell is in the Elemental replication Part Two. See:
Cell Description
�
��� The electrolysis cell is designed to hold one (1) liter of electrolyte and operate at approximately 150 watt power level for the production of monatomic hydrogen and� monatomic oxygen which is burned back to pure water and collected in a glass condenser.� Cell container is schedule 40 PVC pipe section 6 inches long with bottom cap cemented on.� The top of the cell has a 4 inch female thread adapter cemented on to provide access to the interior via a male threaded plug which has the gas outlet port and two electrolyte fill ports to provide for replacement of lost electrolyte on the fly for continuos operation.� Positive and negative terminals are provided for external connection of the power supply leads to the internal anode- cathode stack.
��� The cell plate stack consist of 8 anode plates and 8 cathode plates of the following sizes constructed from 316L stainless steel of 22 ga. thickness.
4 ea.� 3� X 3� plates,� 2 ea. 3� X 2.75�plates,� 2 ea. 3� X 2.5�plates,� 2 ea. 3� X 2.25� plates,� 2 ea. 3� X 2� plates,� 2 ea. 3� X 1.75� plates, and� 2 ea. 3� X 1.5� plates.� The plates are drilled and stacked with alternating anode and cathode plates spaced 1/8� apart which makes a cylindrical shaped array which fits nicely inside of the 4� ID PVC� cell container.� Electrical leads are braided copper of #10 size which are covered by shrink tubing to cover conductive surface as they pass through the electrolyte to the cell terminal bolts.� All electrical surfaces other than the anode and cathode plates are carefully covered with PVC cement to prevent deterioration from electrolyte contact.��� Please note that if allowed to come into contact with �charged� surfaces monatomic hydrogen and monatonic oxygen will imediately form into their usual occuring state as diatomic H2 and O2 molecules.
���������������������������������������������������������������������������������������������������
On 11/8/2018 4:29 PM, Mick [email protected]<mailto:[email protected]> [EVGRAY] wrote:
�
Hi Norm,
The catalysts are very interesting.� Iron Cobalt and Nickel all ferromagnetic but at different spins.
Correct me if I am wrong but based on reading your links a bingofuel type reactor using tungsten electrodes that hopefully would last much longer would likely produce OH rather than H and carbon monoxide, what do you think?
Also water is strange indeed in that a pyramid or orgone accumulator changes it and these simple changes could make for water that breaks up more easily.� I would love to know what results you demonstrated with the totally juvenile memory free water you put back together from the OH?�
Sorry to hear about your neck fracture, I have a similar issue and it is extremely painful and debilitating at times.
Mick
On 11/7/2018 4:15 AM, Norman Wootan [email protected]<mailto:[email protected]> [EVGRAY] wrote:
�
On 11/7/2018 6:06 AM, Norman Wootan wrote:
Jakob Wall! & all other researchers on here need to read the Whole Story as to why I no longer have a research lab.� Jakob, I'm sorry I did not reveal to you the BEST in my opinion of methods of producing hydrogen gas for I felt it was a little too advanced and difficult for you to experiment with.� See: https://patents.google.com/patent/US7097676B2/en .�� There is a very long story behind this US Patent and a hell of a lot of research. The quest for a very inexpensive method of splitting water has been the Holy Grail of� cheap energy.�� In addition to the research papers and links that I gave to you, here are some more to dwell on.
https://www.researchgate.net/post/At_what_temperature_water_will_decompose_to_Oxygen_and_Hydrogen<https://www..researchgate.net/post/At_what_temperature_water_will_decompose_to_Oxygen_and_Hydrogen>
https://www.quora.com/Does-water-break-down-into-oxygen-and-hydrogen-at-high-temperatures-If-so-then-at-what-temperature<https://www..quora.com/Does-water-break-down-into-oxygen-and-hydrogen-at-high-temperatures-If-so-then-at-what-temperature>
https://www.quora.com/How-much-water-can-you-split-into-hydrogen-and-oxygen-using-electrolysis-with-one-kilowatt-hour-of-electricity<https://www..quora.com/How-much-water-can-you-split-into-hydrogen-and-oxygen-using-electrolysis-with-one-kilowatt-hour-of-electricity>
http://www.redrok.com/hion96a1.htm
https://www.nature.com/articles/nplants201741<https://www..nature.com/articles/nplants201741>�� Please read carefully about the play of Nickel in this approach!
https://en.m.wikipedia.org/wiki/Water_splitting
https://en.m.wikipedia.org/wiki/Water-gas_shift_reaction��� I owned 77 acres of land in Eureka Springs, AR where they still had the old water gas generator and gas storage facility.
https://en.m.wikipedia.org/wiki/Decarboxylation
https://phys.org/news/2018-02-uncovers-mechanism-water-splitting-catalyst.html
https://www.scientificamerican.com/article/new-catalyst-could-split-water-cheaply/<https://www..scientificamerican.com/article/new-catalyst-could-split-water-cheaply/>
https://www.technologyreview.com/s/512996/a-cheaper-way-to-make-hydrogen-from-water/<https://www..technologyreview.com/s/512996/a-cheaper-way-to-make-hydrogen-from-water/>
"SUPER STEAM - A Tesla conference in Colorado surfaces new Super Steam Technology (SST). Leonard Dorsett and friends from Texas share strikingly similar views to Aquarian Agency Ltd. They have technology which produces steam instantly at up to 3,000F without a boiler and with 60% savings in fuel over traditional boilers. Nitrogen rich, it can put out gasoline fires and treat many waste problems. Of major importance to Aquarian, this nitrogen-rich steam will help to produce heat and Aquastone at considerable savings."
For further information on Aquarian Agency Ltd. they can be contacted at 38 Weir Rd, Wimbledon, London SW19 SUG, England or on Internet at <aquarian ocign.ape.org>. SUPER STEAM TECHNOLOGY PART 2[http://astrosa.com/n95/n059501.gif]
Leonard Dorsett (PO Box 365, Grapevine, TX 76092) demonstrated his Super Steam Technology at the 1994 International Tesla Symposium. SST is a system for producing steam at any temperature or pressure independently and instantly without the need for a conventional boiler. It can instantly produce steam of any temperature from hot water at 180F to super heated steam at over 3000F, while pressures can vary from 1PSI to 3000PSI with airflow volumes of 1CFM up to over 2000CFM. The system operates on propane, methane, petrol, kerosene, methanol, diesel, hydrogen or just about anything else that bums and converts virtually 100% of the fuel into usable energy. (Note: The person in the picture is Norman Wootan of MRA fame)
This all sounds great, but how does it work? The basis of the unit is a specially designed open throat chamber with controlled air, water and fuel interaction and a high voltage ignition resulting in a direct fire process establishing thermal zones. This creates a stoichiometric condition resulting in a full spectrum of steam product. Now comes the interesting part At the increased temperatures of steam, disassociation occurs. (Could this be a clue to running cars on water??) The hydrogen and oxygen reacts causing an exponential increase of energy resulting in super heated steam. A similar superheat process was addressed by Tesla in the October 12, 1911 publication of the "Engineering News Record".
Applications of the SST system include a much more economical way of producing electricity as no conventional boiler is needed. It will also be an ideal low cost method for heating and cooling homes and businesses. Small portable units can be developed for home use, such as steam cleaning, and insect and ant removal, without the dangers of insecticides. The system can also be used for low cost purification of polluted water or sewerage and can also convert salt water into drinking water both quickly and inexpensively. Other uses are in fire fighting applications, ice and snow removal from roads, etc. and sterilization and nurturing of soil for agriculture where contamination has occurred.
I had designed a method of making hydrogen from carbon & water vapor using the Tesla Atomic Bombardment method of high frequency inside of spherical inclosure like this experiments with the carbon button lamp globes.�� After working with Leonard Dorsett and his Super Steam Project, I chose to use the Water Shift Process instead.� A side note is needed here!� The Super Steam Process was a result of Professor Brown studying the method the German's used for torpedo propulsion from WWI.� Acetylene Gas and sea water produced an exothermic reaction generating Super Steam. Brown built several reactors and tested them in the Tulsa area to break (down hole) the parafin deposits to release crude oil.
The Chemical equation for the reaction in the US Patent: https://patents.google.com/patent/US7097676B2/en
(6C + 12 H2O� = 6CO2 + 24H)
Hydrogen Reactor Development
�
Original concept design was a high voltage, high frequency resonant device that utilized carbon water reaction with the feedstock being in the form of graphite rod stock.� This unit was designed for vehicle application and had too many limitations to be used for mass hydrogen generation.� This type reactor is very effective at hydrogen production since it targets the water vapor molecule at MRI frequencies, which breaks the bonding, allowing the carbon to latch onto the oxygen atoms leaving the hydrogen free. This device was a closed system that used a simple CO2/hydrogen separation stage that enabled the hydrogen to be feed to an internal combustion engine.
�
To allow for a sustained high mass flow of hydrogen gas output, reactor design took on a radical change.� By incorporating the Ranque/Hilsch, Counter Flow Implosion Vortex Principle, and continuous high mass flow and gas separation were achieved in one stage of operation.� Feedstock for this type reactor could be any carbon-based material that could be put into a powder form.� Highest carbon content of the feedstock provides for the most efficient hydrogen production with the least undesirable output material.
�
Super high temperature operating regime was chosen to be above 2500 C for the purpose of producing atomic hydrogen in the process.� The original reactor operated at temperatures that easily gasified basic carbon into a plasma state (>10,000 F) more easily allowing the production of hydrogen from the stoichiometric feed stock ratios.
[cid:[email protected]]
I sold one of my Patents (Sonodiffuser) and paid for my 52 acres of land and built a 5200 sq. Ft. lab the do the Prototype machining and Proof of Concept testing for GAZPROM, Moscow in 2005. A $1.2 million investment and they got the rights to the process and I got the beautiful Research Lab all paid in full. I was a self employed Contractor in Dallas working with HVAC, Electrical and Electronics Maintenance so had to commute 170 miles/day and only had the week ends for my time! Having to mow grass and maintane the 52 acres took all my time and when I suffered a neck fracture in 2012, had to retire. Liquidated the entire facility and sold it off. Moved to Dallas then to South Louisiana where I now do a lot of relaxing and fishing!
Hector and ALL, I did my time in the Barrel so now I will just contribute to the dialog inorder to assist any research you may be doing within my area of experitise!���� BTW! I have been out to pasture for a long time now, so no BULL offense!� As Hector knows, "It fits"! Lol
[cid:[email protected]]
Yes! Hector, I will wear my Border Patrol Hat when you come visit from PR!� Lol
On 11/6/2018 8:52 PM, [email protected]<mailto:[email protected]> [EVGRAY] wrote:
�
By the way ... i can hit mega millions or the power ball� . i never will not have a lab i can work in,� that is worst than death , you have no idea of the technology that had being lost by the greedy fucking bastards fucking my life , they will loose all they have� "soon" because it had being engineered that way by accumulative bad karma, i have another lab they will never reach or be able to intercept or destroy and that will decide their fate ..... they will be fucked hard !
(H)� �
---In [email protected]<mailto:[email protected]>, <mkjekyll@...><mailto:mkjekyll@...> wrote :
Cmon Hector,
Bad taste!
The man had a more serious lab than anyone else here and his work speaks for itself.� Maybe he has gained the fortune he desired through R&D and now shitting in tall cotton or gone fishing reaping the rewards of retirement. Notwithstanding is still kind enough to help point us in the right directions around here.
"Funny�I can look back on a life of achievement, on challenges met, competitors bested, obstacles overcome. I�ve accomplished more than most men, and without the use of my legs. What?What makes a man, Mr. Lebowski?"
On 11/6/2018 8:04 AM, arkresearch@...<mailto:arkresearch@...> [EVGRAY] wrote:
�
Dar n ! a Scientist inventor with no lab is like a breeding bull with no balls !
[Balls Cow GIF - Balls Cow WingDangDoodle GIFs]
---In [email protected]<mailto:[email protected]>, <nwootan@...><mailto:nwootan@...> wrote :
Jacob! You asked me a question and I gave you my opinion!� I'm totally retired at 80 years old and have no lab to experiment in!� Your quote; I heard once a phrase from a researcher who said. '' Slow down boy, we get paid for llooking for solutions, not to find them!''�� That certainly does not apply to me for I have shared all with the folks on this site.� I find you statement very interesting:� Technics that use up 10 % of a magnet in 24 hours with usual amount of gas looks to me extremely inefficient.�� ??????������� Care to share where you saw the power of a permanent magnet being used up!�� We all here on this site share what ever knowledge we have on the various subjects not seeking any monetary gain in any way! That is my approach!�� I just contribute to the dialog when I run across something interesting and think it will assist you guys!�� Norm
On 11/3/2018 11:32 PM, Jakob Wall wall_jakob@...<mailto:wall_jakob@...> [EVGRAY] wrote:
�
Thanks Norman,
But i actually asced for ''most efficient way'' to split water known to you!
I realize there are a lot of different technigues to do just that.
And yes i realize you could give me a rather complex answer. But instead i hope for a
rather easy and reproductive answer since i am looking forward to solve my enerrgy
problems i just can not live with the momentary (sad and very stupid energy situation)
I am still not giving up becouse of a couple mistakes and misunderstandings..
If i would be a car dealer and you would ask me for a most efficient car available on the market
i would for sure not recommend a Prius, since there are a lot of cars with better fuel economie
even without being a hybrid and without additional cost like batterys,e-motors and a bunch added ECU's
Technics that use up 10 % of a magnet in 24 hours with usual amount of gas looks to me extremely
inefficient.
Also very expensive HHO-Garage products with output of 1,6 ltr/min.
Come on, 6 rusty nails and a old car batery does this job, no need to spend 1600 bucks on it.
I honestly expected solide advise or a honest NO way boy, i just talking around.
I heard once a phrase from a researcher who said. '' Slow down boy, we get paid for llooking for
solutions, not to find them!'' That shoked me deeply and even if i get 150 years old, i will not forget it.
Thats true treason on mankind and deciving the people. I really hope nobody on this forum only care
about what he/she will be doing tomorrow.
Jakob
--------------------------------------------
On Sun, 10/28/18, Norman Wootan nwootan@...<mailto:nwootan@...> [EVGRAY] <[email protected]><mailto:[email protected]> wrote:
Subject: Re: Fwd: Fwd: Re: [EVGRAY] Norm's Magnetic Battery
To: [email protected]<mailto:[email protected]>, "Bert Pool" <BertPool512@...><mailto:BertPool512@...>, "Bob Paddock" <bob.paddock@...><mailto:bob.paddock@...>, "joel mcclain" <joel_76670@...><mailto:joel_76670@...>, "Jon Gentry" <jongen422@...><mailto:jongen422@...>, "Mbking42" <mbking42@...><mailto:mbking42@...>, "Toby Grotz" <wireless2@...><mailto:wireless2@...>, "Phil Rembold" <prembold@...><mailto:prembold@...>, "Angel Alvarez" <angel@...><mailto:angel@...>, "Fredric Fletcher" <ffletcher@...><mailto:ffletcher@...>
Received: Sunday, October 28, 2018, 9:44 AM
�
Jacob!� That would be a rather complex answer
but here is your
starting point!
https://kundoc.com/pdf-direct-thermomagnetic-splitting-of-water-.html���
After having been heavily involved in the COLD FUSION
Research
back in the 70s and 80s I quickly settled o0n the best
catalyst in
electrolytic cells which is pure nickel. I still have
the cell
used in the Elemental Replication experiments.
http://www.rexresearch.com/gunnrman/gunnrman.htm����
The hidden
part of this research is the use of a nickel component
in the
combustion chamber. Bosch developed 90,000V ignition
systems to
enable water injection in gas engine which high
lighted the
Graneau HV decomposition of water via HVDC
discharge!
My magnetic Battery when run as an electrolytic cell
to produce
hydrogen does produce a huge amount of hydrogen gas as
shown by
the Dr. Ehrenhaft document.� I would tell you to
pursue the super
high Tesla magnetic flux and nickel electrodes in an
electrolytic
cell.� The major obstacle to be overcome is the rapid
collection
of ions from solution by the 1.3 Tesla flux across a
..020"
mechanical gap which quickly takes the cell into a
super-conduction mode which takes out the driving DC
power supply.
You can flush the magnetic gaps with distilled water
and the gaps
will show in the meg-ohm range then go to zero ohms
after a short
period of running, the gathered ions totally short
cell. During
the brief runs there is a huge amount of hydrogen gas
produced�
which I burned off as it was generated.� Much can be
said about
driving the cell with high frequencies as the Myers
research
showed.� Our friend up in Canada at George Wiseman,
Eagle Research
is running well ahead of the crowd on the production
of H-H-O.
Just for giggles!
16 October
1996
To: Hal
Fox,� Fusion Facts
Elemental
Replication ?
�
����� Around mid
September
I put together an
electrolysis cell similar to the Miles Nickel Cold
Fusion Cell
with the goal of
exploring the possibilities of making what is
termed �Pristine
Water�.�� This water
which will be used by Homeopaths
will have had all memory or information
removed.� This is accomplished by
recombining monatomic
hydrogen and monatomic oxygen as generated in a
properly
designed cell.� This is
the ultimate in purity since this is
water with conditions at the time of original
creation.� �Holly Water�is a term
coined by my dear
friend and fellow researcher Joe Tyls of
Vancouver, BC.�� After several weeks of
successful operation
producing water that had all the earmarks of a
true �pristine
water� a fellow
researcher suggested using an alternate
electrolyte.�� A solution was selected
that contained 77
colloidal minerals as found in plants that are the
easiest
assimilated into the
body.�� With the
electrolyte changed the
cell was put back into operation as before with a
nice
recombination burn and
production of the sought after �pristine
water�.�������������������������������������������������������������������������������������������������������������������������������������
�������
��� After about an
hour of
operation the cell
went absolutely �nuts� with the temperature
rapidly climbing
to boiling point
and the current out of sight.�
When the
cell was opened we found a deep red sludge deposit
which
shorted the cell
plates.�� Our first
thought was that the
electrolytic action precipitated out the colloidal
minerals
which caused the
deposit found.�� The�
electrolyte was allowed
to settle out the
precipitate.�� After�
decanting off,� the clear electrolyte
was
returned to the
cell for another run. Again the cell operated
normally for
about an hour with a
normal recombination burn and recovery of the
water being
consumed by the cell
in the splitting action.�� Again
the cell
temperature and current mirrored the first
run.�
Again the cell contained the same amount of
sludge
residue.�� This process
was repeated ten (10) times
with exactly the same results.��
All of
the sludge was carefully dried and weighed on an
electronic
scale with a five
decimal
resolution.���������������������
The cell plates and all hardware were
weighed to
determine any loss of
mass that may contribute to the mass gain observed
in the
sludge.� Five hundred
(500) ml of the original
electrolyte solution used in the cell was vacuum
distilled to
determine the
exact mass of colloidal minerals
contained.�
When all factors were considered we came
out with a
mass gain of� 48 gm
which cannot be explained by
conventional
electrolysis.����������������������
��� After talking
to Dr.
Robert Bass and Hal
Fox I learned of a patent that has been filed on
the
transmutation of elements
in the cold fusion cell which is the process that
Dr. John
Bockris has been so
active in.�� Both Dr.
Bass and Hal Fox
stated that what I was observing is not the same
as the
transmutation observed
in the cold fusion cell since I have a overall
mass gain and
not a lateral
movement of elements in the periodic table toward
lighter
elements with a
resulting heat release.� This
unusual
cell operation has caused quite a reaction in the
scientific
community. �At this
time I have built a complete new cell
with every possible factor which could possibly
explain the
mass gain
considered and documented.� The
ten (10)
consecutive runs on the new cell will be completed
soon and a
report will be
forthcoming.�� What is
interesting about
this phenomenon is that when an eleventh run was
made with the
original
electrolyte exactly the same amount of residue was
recovered
as in the previous
ten
runs.�����������������������������������������������������������������������
�
Since
the same electrolyte is reused each time with only
distilled
water being added
to replace the volume lost by the removal of the
solids and
the water recovered
by the recombination burn we are hard pressed to
explain the
observed
phenomenon.���� The
electrolyte appears
stronger in mineral concentration and shows no
sign of
depletion.��������������������������������
�� After conferring
with
Joe Tyls we arrived at
the conclusion that the 77 colloidal minerals
contained in the
electrolyte
provide the atomic templates needed for the
monatomic hydrogen
(father of all
the elements) to replicate selected elements in
this exotic
mixture.� If you
subscribe to the theories of the late
Walter Russell and his explanation of the octave
based
periodic table with
monatonic hydrogen being what he describes as
hydrons
(precursor to hydrogen)
then it is possible for the replication of
elements directly
from energy input
alone.� This is how all
matter was
created in the beginning as described by
Schappeller in �The
Physics of the
Primary State of Matter�.��� I
will keep
all informed as to our progress and findings in
this very
intriguing venture.
�
Norman
Wootan
P.O.
Box 141049
Dallas,
TX 75214
(214)
360-0865
�
�
CC:� Gene Mallove,
Infinite
Energy
CC:� Dr. John
Bockris, Texas
A/M
On 10/28/2018 1:01 AM,
Jakob Wall
wall_jakob@...<mailto:wall_jakob@...>
[EVGRAY] wrote:
�
Thanks Norman,
BTW, what is the most effective water split
device that
you ever put you hands on?
As HHO researcher for dekades you should be
able to point
us directly to the most effective known!
Please be specific about reconstruction of the
same, since
we are in public domain it will become public
knowledge
and public good. I assume you intend nothing
else,rigth ?
--------------------------------------------
On Sat, 10/27/18, Norman Wootan nwootan@...<mailto:nwootan@...>
[EVGRAY]
<[email protected]><mailto:[email protected]>
wrote:
Subject: Re: Fwd: Fwd: Re: [EVGRAY] Norm's
Magnetic
Battery [3 Attachments]
To: "Bert Pool" <BertPool512@...><mailto:BertPool512@...>,
"Bob
Paddock" <bob.paddock@...><mailto:bob.paddock@...>,
"joel mcclain"
<joel_76670@...><mailto:joel_76670@...>,
"Jon Gentry"
<jongen422@...><mailto:jongen422@...>,
"Lane Wootan"
<lanewootan@...><mailto:lanewootan@...>,
"Mbking42"
<mbking42@...><mailto:mbking42@....>,
"Toby Grotz"
<wireless2@...><mailto:wireless2@...>,
"Phil Rembold"
<prembold@...><mailto:prembold@....>,
"Angel Alvarez"
<angel@...><mailto:angel@...>,
"Fredric Fletcher"
<ffletcher@...><mailto:ffletcher@...>,
[email protected]<mailto:[email protected]>
To understand the unwinding of a thread
leading
to Magnetic
Generating Hydrogen and this Magnetic Battery,
we have
to dust off
our� 9th grade Chemistry Books!
http://www.rexresearch.com/ehrenhaf/ehrenhaf.htm�����
I guess Dr.
Ehrenhaft was the first to propose a Magnetic
Current.
(Jon
Gentry, Your liquid metal vortex helix).
https://revolution-green.com/can-electrolysis-powered-magnets/������
Ah! Ha!� more on Magnetic Currents!!!
https://sciencing.com/magnetic-properties-hydrogen-7648446..html<https://sciencing.com/magnetic-properties-hydrogen-7648446.html>
https://www.labmanager.com/white-papers-and-application-notes/2010/05/resistivity-conductivity-measurement-of-purified-water#.W9So9uJRc2w
https://www.askiitians.com/forums/Physical-Chemistry/19/19074/electro-che
https://en.m.wikipedia.org/wiki/Overpotential
https://www.quora.com/Why-is-oxygen-molecule-paramagnetic-although-it-does-not-contain-any-unpaired-electron
https://www.researchgate.net/publication/251580541_The_effect_of_magnetic_force_on_hydrogen_production_efficiency_in_water_electrolysis
http://www.physicscentral.com/experiment/physicsathome/electricwhirlpool.cfm
http://www.linux-host.org/energy/bmagpump.htm
Now Jon Gentry you have your liquid metal pump
so
that you can
make the helix tube Vortex!�
Ferricpetacarbonyl or
micro fine neo
powder to provide the liquid metal for pump
circuit.
Lots of reading here!���� Please think
about the
ramifications of
a Magnetic Current as proposed by Dr.
Ehrenhaft!
#yiv6050531777 #yiv6050531777 --
#yiv6050531777ygrp-mkp {
border:1px solid #d8d8d8;font-family:Arial;margin:10px
0;padding:0 10px;}
#yiv6050531777 #yiv6050531777ygrp-mkp hr {
border:1px solid #d8d8d8;}
#yiv6050531777 #yiv6050531777ygrp-mkp #yiv6050531777hd {
color:#628c2a;font-size:85%;font-weight:700;line-height:122%;margin:10px
0;}
#yiv6050531777 #yiv6050531777ygrp-mkp #yiv6050531777ads {
margin-bottom:10px;}
#yiv6050531777 #yiv6050531777ygrp-mkp .yiv6050531777ad {
padding:0 0;}
#yiv6050531777 #yiv6050531777ygrp-mkp .yiv6050531777ad p {
margin:0;}
#yiv6050531777 #yiv6050531777ygrp-mkp .yiv6050531777ad a {
color:#0000ff;text-decoration:none;}
#yiv6050531777 #yiv6050531777ygrp-sponsor
#yiv6050531777ygrp-lc {
font-family:Arial;}
#yiv6050531777 #yiv6050531777ygrp-sponsor
#yiv6050531777ygrp-lc #yiv6050531777hd {
margin:10px
0px;font-weight:700;font-size:78%;line-height:122%;}
#yiv6050531777 #yiv6050531777ygrp-sponsor
#yiv6050531777ygrp-lc .yiv6050531777ad {
margin-bottom:10px;padding:0 0;}
#yiv6050531777 #yiv6050531777actions {
font-family:Verdana;font-size:11px;padding:10px 0;}
#yiv6050531777 #yiv6050531777activity {
background-color:#e0ecee;float:left;font-family:Verdana;font-size:10px;padding:10px;}
#yiv6050531777 #yiv6050531777activity span {
font-weight:700;}
#yiv6050531777 #yiv6050531777activity span:first-child {
text-transform:uppercase;}
#yiv6050531777 #yiv6050531777activity span a {
color:#5085b6;text-decoration:none;}
#yiv6050531777 #yiv6050531777activity span span {
color:#ff7900;}
#yiv6050531777 #yiv6050531777activity span
....yiv6050531777underline {
text-decoration:underline;}
#yiv6050531777 ...yiv6050531777attach {
clear:both;display:table;font-family:Arial;font-size:12px;padding:10px
0;width:400px;}
#yiv6050531777 ...yiv6050531777attach div a {
text-decoration:none;}
#yiv6050531777 ...yiv6050531777attach img {
border:none;padding-right:5px;}
#yiv6050531777 ...yiv6050531777attach label {
display:block;margin-bottom:5px;}
#yiv6050531777 ...yiv6050531777attach label a {
text-decoration:none;}
#yiv6050531777 blockquote {
margin:0 0 0 4px;}
#yiv6050531777 ...yiv6050531777bold {
font-family:Arial;font-size:13px;font-weight:700;}
#yiv6050531777 ...yiv6050531777bold a {
text-decoration:none;}
#yiv6050531777 dd.yiv6050531777last p a {
font-family:Verdana;font-weight:700;}
#yiv6050531777 dd.yiv6050531777last p span {
margin-right:10px;font-family:Verdana;font-weight:700;}
#yiv6050531777 dd.yiv6050531777last p
span.yiv6050531777yshortcuts {
margin-right:0;}
#yiv6050531777 div.yiv6050531777attach-table div div a {
text-decoration:none;}
#yiv6050531777 div.yiv6050531777attach-table {
width:400px;}
#yiv6050531777 div.yiv6050531777file-title a, #yiv6050531777
div.yiv6050531777file-title a:active, #yiv6050531777
div.yiv6050531777file-title a:hover, #yiv6050531777
div.yiv6050531777file-title a:visited {
text-decoration:none;}
#yiv6050531777 div.yiv6050531777photo-title a,
#yiv6050531777 div.yiv6050531777photo-title a:active,
#yiv6050531777 div.yiv6050531777photo-title a:hover,
#yiv6050531777 div.yiv6050531777photo-title a:visited {
text-decoration:none;}
#yiv6050531777 div#yiv6050531777ygrp-mlmsg
#yiv6050531777ygrp-msg p a span.yiv6050531777yshortcuts {
font-family:Verdana;font-size:10px;font-weight:normal;}
#yiv6050531777 ...yiv6050531777green {
color:#628c2a;}
#yiv6050531777 ...yiv6050531777MsoNormal {
margin:0 0 0 0;}
#yiv6050531777 o {
font-size:0;}
#yiv6050531777 #yiv6050531777photos div {
float:left;width:72px;}
#yiv6050531777 #yiv6050531777photos div div {
border:1px solid
#666666;min-height:62px;overflow:hidden;width:62px;}
#yiv6050531777 #yiv6050531777photos div label {
color:#666666;font-size:10px;overflow:hidden;text-align:center;white-space:nowrap;width:64px;}
#yiv6050531777 #yiv6050531777reco-category {
font-size:77%;}
#yiv6050531777 #yiv6050531777reco-desc {
font-size:77%;}
#yiv6050531777 ...yiv6050531777replbq {
margin:4px;}
#yiv6050531777 #yiv6050531777ygrp-actbar div a:first-child {
margin-right:2px;padding-right:5px;}
#yiv6050531777 #yiv6050531777ygrp-mlmsg {
font-size:13px;font-family:Arial, helvetica, clean,
sans-serif;}
#yiv6050531777 #yiv6050531777ygrp-mlmsg table {
font-size:inherit;font:100%;}
#yiv6050531777 #yiv6050531777ygrp-mlmsg select,
#yiv6050531777 input, #yiv6050531777 textarea {
font:99% Arial, Helvetica, clean, sans-serif;}
#yiv6050531777 #yiv6050531777ygrp-mlmsg pre, #yiv6050531777
code {
font:115% monospace;}
#yiv6050531777 #yiv6050531777ygrp-mlmsg * {
line-height:1.22em;}
#yiv6050531777 #yiv6050531777ygrp-mlmsg #yiv6050531777logo {
padding-bottom:10px;}
#yiv6050531777 #yiv6050531777ygrp-msg p a {
font-family:Verdana;}
#yiv6050531777 #yiv6050531777ygrp-msg
p#yiv6050531777attach-count span {
color:#1E66AE;font-weight:700;}
#yiv6050531777 #yiv6050531777ygrp-reco
#yiv6050531777reco-head {
color:#ff7900;font-weight:700;}
#yiv6050531777 #yiv6050531777ygrp-reco {
margin-bottom:20px;padding:0px;}
#yiv6050531777 #yiv6050531777ygrp-sponsor #yiv6050531777ov
li a {
font-size:130%;text-decoration:none;}
#yiv6050531777 #yiv6050531777ygrp-sponsor #yiv6050531777ov
li {
font-size:77%;list-style-type:square;padding:6px 0;}
#yiv6050531777 #yiv6050531777ygrp-sponsor #yiv6050531777ov
ul {
margin:0;padding:0 0 0 8px;}
#yiv6050531777 #yiv6050531777ygrp-text {
font-family:Georgia;}
#yiv6050531777 #yiv6050531777ygrp-text p {
margin:0 0 1em 0;}
#yiv6050531777 #yiv6050531777ygrp-text tt {
font-size:120%;}
#yiv6050531777 #yiv6050531777ygrp-vital ul li:last-child {
border-right:none !important;
}
#yiv6050531777