Re: [EVGRAY] Magnifing transmiter FCC permit

Body

Warren,

I found this for you, maybe you can look inside your induction cooker
and see if this matches up to proceed with a lobotomy.  Don't forget to
discharge the caps, those little poly suckers can hold a charge for days.

http://openschemes.com/2011/04/28/manual-control-of-the-1-8kw-induction-cooktop/


On 10/26/2018 5:27 PM, Warren Keillor [email protected]
[EVGRAY] wrote:
>  
>
> Hi Jim
>
> Yes I have a big Bedini wheel, capable of mounting 18 coils on the 48"
> diameter 3/8" plexiglas disc mounting platform.
> It also has a 5/16" drive shaft to mount accessories, should that come
> to mind.
> Cheers Warren
>
> Sent from Yahoo Mail on Android
> <https://go.onelink.me/107872968?pid=InProduct&c=Global_Internal_YGrowth_AndroidEmailSig__AndroidUsers&af_wl=ym&af_sub1=Internal&af_sub2=Global_YGrowth&af_sub3=EmailSignature>
>
>     On Fri, 26 Oct 2018 at 2:22 PM, James Glinski [email protected]
>     [EVGRAY]
>     <[email protected]> wrote:
>      
>
>     Warren I thought of you because you have a functioning Bedini
>     wheel .I was reviewing some Bedini DVDs and remembered he said
>     that he was running his units on moon light .well remember the old
>     oil lamps of the 1800 ,s what if you could find the right light
>     like a LED and put a solar panel behind it on the wall .if the
>     moon can run the units.. a light should do better .and he said
>     that the magneto effect was the real power of the unit and is
>     generally disconnected from the power source in that there's a
>     sweet spot and adding more power doesn't increase the scalar out
>     put .he said some of his units were 18 times OU .so if the right
>     combination could be found you would have permit light and
>     recharge day and night .your yacht could have its own sun
>     regardless of the time or weather and be fully lite up constantly
>     .the mono plasma solar cells would be best for this .a looper ?
>     Mine is in parts right now .also you might use a florescent four
>     foot tube and run it on a small flyback transformer .it's plasma
>     and the light off of it would be combined with the EMF coming off
>     the plasma to the panel to help charge .and old flyback just whine
>     wires around the exposed core and put a diode to that and plug
>     into a varac and slowly ajust to brightness ..they run on 700
>     volts but 25,000 would really run it . just a thought .jim PS he
>     said Watson's unit would turn on only occasionally due to that big
>     fly wheel meaning it was running on the magneto effect with out
>     power that's why it was so OU .absorbing the pluse kick energy and
>     just running on that .next up grade is a big flywheel .on that I
>     was thinking concrete might work well heavy pourable long lasting
>     .? Jim out 
>
>
>
>     On Friday, October 26, 2018, Dave Muckerman [email protected]
>     <mailto:[email protected]> [EVGRAY] <[email protected]
>     <mailto:[email protected]>> wrote:
>
>          
>         Warren good point, about the eddy current.
>
>         Oh way back you wrote about grounding a solar system....
>         I like to keep mine floating but have ground wire surrounding
>         panels to collect static.
>         My home wiring is left as is with neutral grounded at many
>         points through appliances..
>         I found it impossible to get it all floating.
>         I recommend using a isolation Tx on your inverter to home
>         wiring so you inverter and batterys won't become hot!
>         My cable internet uses a ground and needs 12 volts DC for the
>         modem from my solar DC and caused havoc without the isolation.
>
>
>         On Thursday, October 25, 2018 10:49 AM, "Warren Keillor
>         [email protected]
>         <mailto:[email protected]> [EVGRAY]"
>         <[email protected] <mailto:[email protected]>> wrote:
>
>
>          
>         Dave
>         The eddy currents in a brass core will get it hot, I would expect.
>         Cheers Warren
>
>         Sent from Yahoo Mail on Android
>         <https://go.onelink.me/107872968?pid=InProduct&c=Global_Internal_YGrowth_AndroidEmailSig__AndroidUsers&af_wl=ym&af_sub1=Internal&af_sub2=Global_YGrowth&af_sub3=EmailSignature>
>
>             On Thu, 25 Oct 2018 at 11:09 AM, Dave Muckerman
>             [email protected] <mailto:[email protected]> [EVGRAY]
>             <[email protected] <mailto:[email protected]>>
>             wrote:
>              
>             Does anyone not know using brass instead of iron in a core
>             will make any coil less inductive than no core or air?
>             Wonder if anything good could result?
>
>             air coils don't saturate right?
>
>
>             On Thursday, October 25, 2018 8:03 AM, "Norman Wootan
>             [email protected] <mailto:[email protected]> [EVGRAY]"
>             <[email protected] <mailto:[email protected]>>
>             wrote:
>
>
>              
>             James!   During my many years of hands on Electrical
>             Contracting and Researching electrical phenomenon, my
>             first real brush with the Neutral Spike was while
>             designing small electric motors in 1981. This was a tall
>             stack shaded pole motor that was designed to be reversible
>             by switching the position (electrically) of the capacitor
>             in series with the start windings via double pole/ double
>             throw reversing switch.   This new prototype motor was MFG
>             in Chine and test samples were shipped to me for QC
>             testing.  Destructive testing included the reversal of the
>             motor while running full speed forward via switching the
>             reversal switch! When switched the double throw switch
>             literally exploded with a loud WOOOMP! and a bright green
>             flash. (vaporized copper). I had a double EE Professor
>             from UT Arlington come over and observe the phenomenon.
>             since the whole 1/6th HP motor was being run off 18ga. zip
>             cord with earth bond ground wire to motor frame, it was
>             quit bizarre to see a 30 amp rated switch just explode.
>             His calculations could not explain where the burst of
>             energy came from. After welding the contacts of several
>             heavy duty reversing contactors and examination of the
>             original motor schematic with the wiring as received from
>             China ,I found that the little lady in tennis shoes
>             (assembly line Chinese lady) had placed the reversing
>             circuit and switch on the neutral side of the line input.
>             In effect (when in transit) the entire motor electric
>             circuitry was in an isolated state (floating neutral)
>             condition which is a great big NO, NO, This set up the
>             perfect scenario for the neutral spike from earth ground
>             to occur.  I have written all this up several times before
>             for this EVGRAY site. Most people do not understand how
>             shaded pole motors work much less how you reverse their
>             rotation. You have to reverse the rotating magnet field by
>             phase angle 90 degree leading or 90 degree lagging (start
>             windings) relative to the main run windings. See:
>             https://en.m.wikipedia.org/ wiki/Shaded-pole_motor
>             <https://en.m.wikipedia.org/wiki/Shaded-pole_motor>
>             https://woodgears.ca/motors/ reversing.html
>             <https://woodgears.ca/motors/reversing.html>
>
>             On 10/24/2018 10:10 PM, James Glinski [email protected]
>             <mailto:[email protected]> [EVGRAY] wrote:
>>              
>>             Just my opinion but that looper might be a version of the
>>             pulse led out research .a Chinese guy mad a wheel and
>>             found that if you pulsed once you get three back .the
>>             heavy fly wheel would absorb the  kinetic energy from the
>>             pluse and run the DC generator .the board would control
>>             the pulse timing .a1000 watt pulse would return 3000
>>             watts in kinetic energy .spread that energy around the
>>             pancake motor coils to reduce general over loading of a
>>             single .point .but the Chinese version doesn't use iron
>>             cores .this is a lot like bedini's first self runner but
>>             he adjusted it for one battery .and ran for 15 years
>>             .what if he adjusted it for ten ?
>
>             https://www.johnsonelectric. com/en/resources-for-
>             engineers/ac-motors/principle- of-operation
>             <https://www.johnsonelectric.com/en/resources-for-engineers/ac-motors/principle-of-operation>
>
>
>
>>             On Oct 24, 2018 3:35 PM, "Mick [email protected]
>>             <mailto:[email protected]> [EVGRAY]"
>>             <[email protected] <mailto:[email protected]>>
>>             wrote:
>>
>>                  
>>                 Norm,
>>                 How many different setups did you use in your formal
>>                 investigation of the neutral spike,  I know about the
>>                 locked rotor motor but were there others?
>>                 There seems to be some crossover with Don Smiths
>>                 claims of aluminum and copper used as opposing
>>                 capacitor plates and the work of the builder of the
>>                 Swiss Testatika machine.
>>                 What if any interesting observations have you made in
>>                 re to the copper/aluminum function?
>>
>>                 On 10/24/2018 12:13 PM, Norman Wootan [email protected]
>>                 <mailto:[email protected]> [EVGRAY] wrote:
>>>                  
>>>                 Mick! I was the first on this site to bring up the
>>>                 Evenescent wave &
>>>                 critical angle for it was in my research on a zero
>>>                 loss solar heat
>>>                 collector.     This tied in directly to MBKIng work
>>>                 on the plasmoid
>>>                 experiments.
>>>
>>>                 https://web.stanford.edu/~
>>>                 ajlucas/Evanescent%20Waves.pdf
>>>                 <https://web.stanford.edu/%7Eajlucas/Evanescent%20Waves.pdf>
>>>
>>>                 https://en.wikipedia.org/wiki/ Evanescent_field
>>>                 <https://en.wikipedia.org/wiki/Evanescent_field>
>>>
>>>                 On 10/23/2018 7:37 PM, Mick [email protected]
>>>                 <mailto:[email protected]> [EVGRAY] wrote:
>>>                 >  Zenneck or Evenescent wave
>>>
>>
>
>
>
>
>
>