Re: [EVGRAY] Magnifing transmiter FCC permit

Body

Warren I thought of you because you have a functioning Bedini wheel .I was
reviewing some Bedini DVDs and remembered he said that he was running his
units on moon light .well remember the old oil lamps of the 1800 ,s what if
you could find the right light like a LED and put a solar panel behind it
on the wall .if the moon can run the units.. a light should do better .and
he said that the magneto effect was the real power of the unit and is
generally disconnected from the power source in that there's a sweet spot
and adding more power doesn't increase the scalar out put .he said some of
his units were 18 times OU .so if the right combination could be found you
would have permit light and recharge day and night .your yacht could have
its own sun regardless of the time or weather and be fully lite up
constantly .the mono plasma solar cells would be best for this .a looper ?
Mine is in parts right now .also you might use a florescent four foot tube
and run it on a small flyback transformer .it's plasma and the light off of
it would be combined with the EMF coming off the plasma to the panel to
help charge .and old flyback just whine wires around the exposed core and
put a diode to that and plug into a varac and slowly ajust to brightness
.they run on 700 volts but 25,000 would really run it . just a thought .jim
PS he said Watson's unit would turn on only occasionally due to that big
fly wheel meaning it was running on the magneto effect with out power
that's why it was so OU .absorbing the pluse kick energy and just running
on that .next up grade is a big flywheel .on that I was thinking concrete
might work well heavy pourable long lasting .? Jim out


On Friday, October 26, 2018, Dave Muckerman [email protected] [EVGRAY] <
[email protected]> wrote:

>
>
> Warren good point, about the eddy current.
>
> Oh way back you wrote about grounding a solar system....
> I like to keep mine floating but have ground wire surrounding panels to
> collect static.
> My home wiring is left as is with neutral grounded at many points through
> appliances.
> I found it impossible to get it all floating.
> I recommend using a isolation Tx on your inverter to home wiring so you
> inverter and batterys won't become hot!
> My cable internet uses a ground and needs 12 volts DC for the modem from
> my solar DC and caused havoc without the isolation.
>
>
> On Thursday, October 25, 2018 10:49 AM, "Warren Keillor
> [email protected] [EVGRAY]" <[email protected]> wrote:
>
>
>
> Dave
> The eddy currents in a brass core will get it hot, I would expect.
> Cheers Warren
>
> Sent from Yahoo Mail on Android
> <https://go.onelink.me/107872968?pid=InProduct&c=Global_Internal_YGrowth_AndroidEmailSig__AndroidUsers&af_wl=ym&af_sub1=Internal&af_sub2=Global_YGrowth&af_sub3=EmailSignature>
>
> On Thu, 25 Oct 2018 at 11:09 AM, Dave Muckerman [email protected] [EVGRAY]
> <[email protected]> wrote:
>
> Does anyone not know using brass instead of iron in a core will make any
> coil less inductive than no core or air?
> Wonder if anything good could result?
>
> air coils don't saturate right?
>
>
> On Thursday, October 25, 2018 8:03 AM, "Norman Wootan [email protected]
> [EVGRAY]" <[email protected]> wrote:
>
>
>
> James!   During my many years of hands on Electrical Contracting and
> Researching electrical phenomenon, my first real brush with the Neutral
> Spike was while designing small electric motors in 1981. This was a tall
> stack shaded pole motor that was designed to be reversible by switching the
> position (electrically) of the capacitor in series with the start windings
> via double pole/ double throw reversing switch.   This new prototype motor
> was MFG in Chine and test samples were shipped to me for QC testing.
> Destructive testing included the reversal of the motor while running full
> speed forward via switching the reversal switch! When switched the double
> throw switch literally exploded with a loud WOOOMP! and a bright green
> flash. (vaporized copper). I had a double EE Professor from UT Arlington
> come over and observe the phenomenon. since the whole 1/6th HP motor was
> being run off 18ga. zip cord with earth bond ground wire to motor frame, it
> was quit bizarre to see a 30 amp rated switch just explode. His
> calculations could not explain where the burst of energy came from. After
> welding the contacts of several heavy duty reversing contactors and
> examination of the original motor schematic with the wiring as received
> from China ,I found that the little lady in tennis shoes (assembly line
> Chinese lady) had placed the reversing circuit and switch on the neutral
> side of the line input. In effect (when in transit) the entire motor
> electric circuitry was in an isolated state (floating neutral) condition
> which is a great big NO, NO, This set up the perfect scenario for the
> neutral spike from earth ground to occur.  I have written all this up
> several times before for this EVGRAY site. Most people do not understand
> how shaded pole motors work much less how you reverse their rotation. You
> have to reverse the rotating magnet field by phase angle 90 degree leading
> or 90 degree lagging (start windings) relative to the main run windings.
> See:
> https://en.m.wikipedia.org/wiki/Shaded-pole_motor
> https://woodgears.ca/motors/reversing.html
>
> On 10/24/2018 10:10 PM, James Glinski [email protected] [EVGRAY] wrote:
>
>
> Just my opinion but that looper might be a version of the pulse led out
> research .a Chinese guy mad a wheel and found that if you pulsed once you
> get three back .the heavy fly wheel would absorb the  kinetic energy from
> the pluse and run the DC generator .the board would control the pulse
> timing .a1000 watt pulse would return 3000 watts in kinetic energy .spread
> that energy around the pancake motor coils to reduce general over loading
> of a single .point .but the Chinese version doesn't use iron cores .this is
> a lot like bedini's first self runner but he adjusted it for one battery
> .and ran for 15 years .what if he adjusted it for ten ?
>
>
> https://www.johnsonelectric.com/en/resources-for-
> engineers/ac-motors/principle-of-operation
>
>
>
> On Oct 24, 2018 3:35 PM, "Mick [email protected] [EVGRAY]" <
> [email protected]> wrote:
>
>
> Norm,
> How many different setups did you use in your formal investigation of the
> neutral spike,  I know about the locked rotor motor but were there others?
> There seems to be some crossover with Don Smiths claims of aluminum and
> copper used as opposing capacitor plates and the work of the builder of the
> Swiss Testatika machine.
> What if any interesting observations have you made in re to the
> copper/aluminum function?
>
> On 10/24/2018 12:13 PM, Norman Wootan [email protected] [EVGRAY] wrote:
>
>
> Mick! I was the first on this site to bring up the Evenescent wave &
> critical angle for it was in my research on a zero loss solar heat
> collector.     This tied in directly to MBKIng work on the plasmoid
> experiments.
>
> https://web.stanford.edu/~ ajlucas/Evanescent%20Waves.pdf
> <https://web.stanford.edu/%7Eajlucas/Evanescent%20Waves.pdf>
> https://en.wikipedia.org/wiki/ Evanescent_field
> <https://en.wikipedia.org/wiki/Evanescent_field>
>
> On 10/23/2018 7:37 PM, Mick [email protected] [EVGRAY] wrote:
> >  Zenneck or Evenescent wave
>
>
>
>
>
>
>
> 
>