Body
Sorry guys! but I got a failure notice on this answer to Mick!
-------- Forwarded Message --------
Subject: Re: [EVGRAY] Hawkings Generator
Date: Thu, 5 Apr 2018 13:25:48 -0500
From: Norman Wootan <[email protected]>
To: [email protected]
Paul Walker, Ken & I were working with Dr. John Milewski, Albuquerque to
produce pairs of exact match crystals (Herkiner diamonds) to enable
discreet communications channel.
The auto ignition systems were Crane Cams, CD ignition power packs triggered with the 555 timer chip. 150k is dead nuts easy to do! I parted company with that whole gang way back in the spring of 2006 and have no contact with them. Nor do I want to!!! After I salvaged out the Leadville Tesla Coil project (Robert Golka) and Ken (All belonged to Ken) sold the two semi trailers, I have severed all relationship!
On 4/5/2018 11:57 AM, Mick [email protected] [EVGRAY] wrote:
>
> Norm,
>
> Did Henry, Gary or Ken determine any other uses for this device beyond
> the molecular densitization process? Have you had contact with any of
> the involved gentlemen of late?
>
> Seems 150kHz would be very fast for an auto ignition coil to respond,
> do you recall the coils if they were auto or motorcycle?
>
> Thanks,
>
> Mick
>
>
> On 4/3/2018 7:51 AM, Norman Wootan [email protected] [EVGRAY] wrote:
>>
>> To: all, Back in the day there was a For What it is Worth category in
>> which I will share this document with you. In this article, there is
>> reference to a large shop warehouse facility which BTW was my
>> Research Lab at Dawson, Texas. I built some of the components for
>> Ken Hawkins, Aetheric Fire experiments and accompanied him to visit
>> ElPaso, TX to wittness an aetheric fire demonstration. I had
>> similar results from my own experiments with the dual auto ignition
>> systems while firing plasma tubes to create ozone at 100nm wave
>> length light.
>>
>> FYI Norm
>>
>> Hawkings’ Generator -1- July 13, 2001
>> HAWKINGS’ GENERATOR of Cold Electricity
>> Report by
>> Henry Curtis and Gary C. Vesperman
>> Gary C. Vesperman lives in a house on 588 Lake Huron Lane, Boulder
>> City, Nevada 89005-1018; 702-435-7947; [email protected]. He
>> worked as a technical writer with 18 computer engineering companies
>> in Silicon Valley and with EG&G Special Projects in Las Vegas. Since
>> 1992, he has written small initial public offering memoranda and
>> business plans for two or three dozen startup companies. During that
>> time he became involved with a network of inventors and scientific
>> pioneers in new sources of energy. He has a BS Electrical Engineering
>> degree from University of Wisconsin-Madison. He has compiled several
>> reports on numerous advanced technologies (see www.padrak.com/vesperman).
>> Gary met Henry Curtis at the Institute of New Energy Symposium in
>> Salt Lake City September 2000. Henry has been involved with the new
>> energy field for approximately 15 years. Henry has investigated in
>> person numerous new energy devices. Henry's permanent address is c/o
>> Adv Cmp Bkkpng, 6111 North Pepper Tree Lane, Tucson, Arizona 85741.
>> Phone is 303-596-6466. Henry’s cell phone is 954-295-5407. He travels
>> most of the time. His email address is [email protected].
>> Henry first met Ken Hawkings at the Keelynet conference in Dallas the
>> weekend of June 16-17, 2001. Norm Wootan had introduced them. Not
>> that Henry knew Norm all that well, but Henry was talking with Norm
>> about the Gray electric motor and the prototype car that was built
>> about 10 years ago and is now for sale for $50,000. When Henry and
>> Ken talked about the Gray motor car Ken told Henry that he did not
>> know where it was and that Joe Gordon had the contact information.
>> Ken was in a hurry to go and gave Henry his cell phone number.
>> Henry called Ken Wednesday evening, June 20, 2001. Ken was excited
>> about talking and had a lot to say about a variety of technical
>> subjects. Ken is a technical person who has been in management of
>> companies for many years. He appears to be 50 to 60 years old.
>> He lives in Dallas where he has a home and a large warehouse. He said
>> that in the last 3 years he had spent a lot of money on free energy
>> projects. His wife is not happy about his negative cash flow. Ken had
>> been a corporate executive and has a technical background. He has
>> retired three times. He is now working towards his fourth retirement.
>> Ken Hawkings was six months into a lucrative nine-month contract in
>> New York City with a telecommunications company called or with the
>> abbreviation ONI. He was working on a project involving resonance
>> between two crystals. The objective of the contract is to build two
>> prototype telephones so that people in separate places can talk to
>> each other while bypassing the existing telecommunications network.
>> An interview with the CEO of ONI Systems Corporation, if it is the
>> same company, is shown on
>> http://www.itradionetwork.com/scripts/martin2.html. ONI Systems
>> Corporation is an all-optical telecommunications company which is
>> only about 2.5 years old.
>> Ken spoke of building some mica capacitors and of first mining the
>> mica in Montana. He also has a substantial interest in 300 submarine
>> batteries that he had purchased on consignment.
>> Hawkings’ Generator -2- July 13, 2001
>> Continuing their discussion on the telephone of the conference – Ken
>> decided to loan Henry the
>> only existing video of an experimental circuit and invited Henry to
>> make some copies and pass
>> them around. Ken arranged for his wife to Fedex a short video to
>> Henry of two aetheric fire
>> experiments with Hawkings’ generator.
>> This device (the “Hawkings’ generator” until a more generic name is
>> agreed upon) was not publicly
>> disclosed during the Keelynet conference. Henry thinks the device is
>> the most exciting he has ever
>> seen during his 15 years in the new energy field.
>> Henry arrived in Las Vegas Friday from Denver to attend an Eckankar
>> conference where he met
>> Jeane Manning, an old friend. Jeane Manning was staying in Gary’s
>> house in Henderson, Nevada.
>> Sunday afternoon there was a lengthy meeting of Henry, Jeane, Gary,
>> and Bob Nelson of
>> rexresearch.com. Henry gave Jeane, Gary and Bob each a copy of the
>> video. Henry told them some
>> information about Hawkings’ generator. Gary scheduled Henry to meet
>> with him and John Grubb
>> Wednesday morning July 11, 2001.
>> Early Wednesday morning Henry came to Gary’s house to have breakfast.
>> The video was played so
>> that Henry could explain to Gary in detail what he knows about the
>> generator. The video does not
>> clearly show some of the wiring and components so the following
>> description may not be totally
>> accurate and complete.
>> In these experiments the apparatus was set up with two lead acid
>> batteries as the power source for
>> two automobile ignition coils. Each of these coils are energized
>> through electronic ignition
>> distributor pick up coils. The distributor pickup coils were
>> triggered by a 555 timer chip’s
>> oscillating pulse. The coils were arranged to alternate their on or
>> off cycles making a push-pull
>> arrangement.
>> The high voltage output of each ignition coil is fed to a 4"
>> fluorescent light. Each fluorescent tube
>> has a strong permanent magnet attached to its center – north pole on
>> one side and south pole on the
>> other side. The aetheric fire (cold electricity) came from the other
>> end of the tube. In the video the
>> two tubes were connected to a small spark gap and produced a 1/4 inch
>> or so white spark. The 555
>> timer maxed out at about 3100 hertz in these experiments. In a later
>> test with a better timer chip a
>> sweet spot, a point of apparently optimum resonance, was found at
>> 150,000 hertz. At this frequency
>> a 6 to 8-inch white spark 4 inches in diameter was produced.
>> In greater detail, two standard 12-volt car batteries are shown in
>> the video. Each battery powers one
>> half of the circuit. A 555 timer, essentially an old model
>> multi-vibrator, turns on and off a switch in
>> each half of the circuit. The timer’s output is applied to both
>> switches in such a manner as to force a
>> pair of two ignition coils to alternately function in a push-pull mode.
>> Each switch connects and disconnects a magnetic pickup coil (from a
>> car engine’s distributor) to a
>> battery on cue from the timer’s signal. Each magnetic pickup powers
>> the primary side of an ignition
>> coil. The high voltage from each ignition coil’s secondary side is
>> applied to one end of a small
>> fluorescent tube which is about 4 inches long and an inch in
>> diameter. At this point, the circuit
>> begins to act weird.
>> Hawkings’ Generator -3- July 13, 2001
>> Two magnets are placed next to each tube so that the north pole of
>> one magnet is opposite of the
>> south pole of the other magnet, with the body of the tube mounted in
>> between the two poles. The
>> magnetic field between the two poles pushes the electrons in the tube
>> off to one side. Now only cold
>> electricity is extracted from the zero point energy field by the
>> tube. The tube is now no longer
>> capable of generating hot electricity. The other end of the tube is
>> applied, through a wire, to a brass
>> (or maybe copper?) rod. A brass ball is on the other end of the rod
>> from the connection with the
>> wire from the tube.
>> Each all-thread rod is horizontally mounted within a hole through a
>> vertical supporting wooden
>> block. A similar rod connected to the other tube is also horizontally
>> mounted through a hole in
>> another vertical supporting wooden block. The bases of these two
>> vertical supporting blocks are
>> attached to a horizontal wooden base. The distance between the two
>> brass balls is adjusted by
>> sliding the two rods through their respective holes in the two
>> vertical wooden blocks. The rods are
>> several inches above the base board.
>> The video shows a white spark between the two brass balls at about
>> three-eighths of an inch apart
>> with the spark one quarter inch in diameter. The spark shown has the
>> shape of a football with its
>> pointed ends cut off about four inches from each point. The frequency
>> being generated by the
>> adjustable timer at the time the amateurish video was taken was 3100
>> hertz, the 555 timer’s
>> maximum frequency.
>> The reason the video is amateurish, according to Henry, is that the
>> device was made operational,
>> and then it was quickly decided to grab a video camera and make a
>> tape which lasts less than five
>> minutes. A more professional video would show a block diagram or
>> schematic of the circuit on a
>> board or poster, close-ups of some key components and an explanation
>> of their function, and then
>> the entire circuit in operation with a thorough explanation of
>> functions, possible theories of
>> operation, and test results.
>> Henry was told that when the switching frequency produced by a
>> different timer is at an optimum of
>> 150,000 hertz, the white spark is approximately six inches long and
>> four inches in diameter.
>> Apparently very little power is being drawn from the batteries. An
>> equivalent-sized spark generated
>> by an arc welder would require thousands of amperes and volts.
>> The circuit “sings” when in operation and is definitely audible on
>> the videotape. It is actually a little
>> loud, which could be a problem in some applications. When Ken first
>> heard the weird singing noise,
>> he recognized that the sound from his circuit is the same singing
>> noise that Nikola Tesla has
>> reported as singing coils and is apparently a sure sign of
>> interaction with the zero point energy field.
>> One very big advantage of this circuit is that it requires only a few
>> relatively inexpensive
>> components. In fact, John Grubb asked if it can be so easily made
>> with a few parts from Radio
>> Shack, a hardware store, and an auto parts store, how can we make
>> money with it? At the moment,
>> there appears to be no plans to obtain any patents.
>> Hawkings’ Generator -4- July 13, 2001
>> Early in 2001 Ken, Norm Wootan of Waco, Texas, and Paul Walker (?)
>> went to Germany to sell a
>> hydrogen generating system they wanted to develop to a company that
>> sells hydrogen in Germany.
>> Paul's background is in physics and submarines. On the flight over to
>> Germany they got into a
>> discussion and figured out the aetheric fire generating concept which
>> was subsequently developed
>> into the “Hawkings’ generator”. Ken remembers this as an exhilarating
>> and exciting time – one of
>> his life's peak experiences.
>> Gary met Norm at the 1996 Tesla Society convention when Norm and Joel
>> McClain reported on
>> their magnetic resonance amplifier.
>> Experimental insertions of objects in the spark, the big one
>> generated with 150,000 hertz, so far
>> have resulted in some peculiar materials and processes. A ceramic has
>> been made with an
>> extraordinarily high melting point of around 10,000 degrees. Ken,
>> Norm, and Paul (?) plan to use
>> this ceramic for lining the reaction vessel of their new hydrogen
>> process.
>> At least some types of materials become more dense the longer they
>> are present inside the spark.
>> There is concern that a critical mass of nuclear explosive could be
>> accidentally created.
>> It is not known to Henry and Gary what the cold electricity can do.
>> For instance, what happens
>> when an electric motor or an incandescent light bulb loads the
>> circuit instead of a spark gap? It is
>> apparent to Henry and Gary that a whole new universe of applications
>> for cold electricity may be
>> opening up, starting with close to ground zero of no knowledge of the
>> phenomenon.
>> In Ken's view there are four kinds of electricity:
>> AC alternating current
>> DC direct current
>> Static electricity or static charges
>> Aetheric fire or cold electricity
>> The aetheric fire is produced by working the aether at high voltages
>> and high frequency. The higher
>> the voltage and the higher the frequency, the more power is produced.
>> 30,000 volts and 150,000 Hz
>> appears to produce abundant amounts of energy, i.e., in the hundreds
>> of thousands of watts range.
>> At this point in time this is an estimate based on very limited
>> qualitative observation. There is no
>> real data.
>> The theory here is that the fluorescent tube acts as a spark gap
>> capturing the aetheric energy. The
>> magnets on either side of the fluorescent tubes deflect the electron
>> flow so that the regular
>> electricity does not flow through the tube. Thus the only output of
>> the tubes is aetheric fire or cold
>> electricity.
>> The net result of all of this is an over-unity power conversion gain
>> which appears to be greater than
>> 1000:1.
>> Hawkings’ Generator -5- July 13, 2001
>> Edwin V. Gray had a company in the 1970-to-1990 era that built
>> electric motors and advertised a
>> soon-to-be-produced electric automobile with unlimited range. Gray
>> was issued two patents. One
>> patent is on the motor, and the other patent is on the diffuser tube.
>> These are discussed at length by
>> Peter Lindemann in his book and video. In this automobile there was a
>> diffuser tube that Gray
>> patented. It is believed that the function of the diffuser tube is
>> the same as the fluorescent tube in
>> Ken Hawkings’ device.
>> It needs to be established that the fluorescent tube is more
>> efficient in the Hawkings’ circuit than
>> Gray’s diffuser tube. Another tube that would be interesting to try
>> is the tube used in the Correas’
>> pulsed abnormal glow discharge reactor. It would be ideal for
>> longevity, compact packaging, and
>> sturdiness reasons to find a device which is not a tube which could
>> be used in place of the
>> fluorescent tube.
>> Henry thinks that running the aetheric fire through a step-down
>> transformer and then rectifying it
>> would result in an abundant source of very cheap electricity. Tests
>> need to be done to determine the
>> feasibility of this approach.
>> Ordinary hot electricity involves electrons moving along an electric
>> field through inductors,
>> resistors, etc. Cold electricity does not involve electrons moving
>> around. Then just what is cold
>> electricity? Gary has no idea. Henry doesn’t know either. There is
>> much fundamental research
>> which needs to be done. For instance, can an ammeter measure cold
>> current? The power of the hot
>> DC electricity from the batteries can be easily measured. So how can
>> the power of the circuit’s
>> output of cold electricity be measured? What is the overall power
>> gain of the generator? Does cold
>> electricity comprise a hidden part of the commonly understood current
>> flow of electrons? And when
>> the electrons are deflected in the tubes, the cold electricity that
>> may have always been present is
>> now allowed to make its presence detectable in some fashion?
>> The morning of July 11, Henry and Gary had their meeting with John
>> Grubb. As customary with
>> John, he is very cautious. They talked about working with the local
>> Las Vegas electric vehicle
>> experts to experimentally adapt the Hawkings’ generator to an
>> existing electric vehicle and see if
>> the car would run for a long time without recharging from Nevada
>> Power. Gary thinks the Las
>> Vegas chapter of the Electric Auto Association is one of the
>> association’s stronger chapters.
>> John, Henry, and Gary decided that the next step is for Henry to talk
>> with Ken Hawkings and ask
>> him what he wants to do. Henry will emphasize to Ken that there is
>> capability in Las Vegas for
>> incorporating the generator as an on-board battery charger for
>> self-powered electric cars.
>> In the meantime, John and his wife Marge moved to Calgary where they
>> are permanent residents.
>> Their address is 34 Rivercrest Villas, Calgary, AB T2C 4K4. Phone is
>> 403-255-0831; fax is 403-
>> 720-9357. Temporary email address is [email protected]. John
>> expects to be back in Las
>> Vegas early August.
>> Henry is going to try to build his own generator in Tucson. Gary will
>> work with Ralph Cruz and
>> Rick Pool, Gary’s friend around the corner from Gary’s house who is
>> an expert automotive
>> mechanic, to build his own generator as well. Gary already has had
>> Rick show him an ignition coil
>> and Rick’s book on car repair which has a good description of
>> ignition coils. Ignition coils have an
>> 87.5 turns ratio between the primary and secondary coils and can put
>> out as much as 20,000 volts.
>> Hawkings’ Generator -6- July 13, 2001
>> Henry and Gary observed that AC electricity is not good for people’s
>> health. DC electricity is much
>> healthier. AC is used so that the voltage can be easily stepped up
>> for long-distance transmission.
>> With a DC generator in each house, a corresponding product line of
>> DC-powered refrigerators,
>> computers, TVs, etc. will need to be created. RVs already use 24V DC
>> power. So RVs may be an
>> excellent initial market for a 24V DC version of the Hawkings’ generator.
>> Keep in mind that the Hawkings’ generator still needs to be verified
>> that it is capable of powering
>> electric motors, charging batteries, and doing other wonderful things
>> besides densifying matter
>> placed inside the white spark.
>>
>>
>> On 4/3/2018 7:20 AM, Norman Wootan [email protected] [EVGRAY] wrote:
>>>
>>> (H), From my very first encounter with EMP back in 1981 while
>>> working as Director of Research & Development for a ceiling fan
>>> manufacturer, was doing final acceptance,destructive testing of new
>>> production samples from China. The motor samples were a tall stack
>>> Emerson copy that had a reverse feature. (1/6th HP). The reverse
>>> feature was accomplished by moving the run capacitor from one end of
>>> the shading windings to the other end via a double pole , double
>>> throw Carling toggle switch. Hookup wire was 18 ga. zip cord 2
>>> conductor. Motor drew 1.75A @120VAC = 210 watts. Testing included
>>> severe loading by running motor full speed forward, then reversing
>>> (toggle switch) which caused motor to grind to a stop , then spool
>>> back up to speed in reverse rotation. After several reversal
>>> operations, the toggle switch exploded with a bright green flash and
>>> the bang of a big fire cracker. Tear down of motor and inspection
>>> found no damage to the 22 ga. motor windings nor to the 18 ga.
>>> internal switch circuit wiring. ???? The Carling 30 amp rated
>>> double pole, double throw switch was totally destroyed with contacts
>>> vaporized. After vaporizing several switches in subsequent test, I
>>> called in an Electrical Engineer Professor from University of Texas
>>> to observe the abnormal operation. We destroyed another switch then
>>> changed the reverse switching to a large double throw motor
>>> reversing contactor rated at 60 A. The contactor exploded with
>>> total destruction of contacts with bang of huge firecracker and
>>> bright green flash. The Professor could not explain the destructive
>>> force created from such small wiring and only a 210 watt line draw
>>> from motor. The 20 amp panel breaker did not trip in any of these
>>> episodes. Here is the explanation as to what caused this whole
>>> scenario. After studying the schematic of the motor wiring plans
>>> and comparing with the (as assembled) by little ladies in tennis
>>> shoes (China), it was found that reversing switch was wired on
>>> neutral side of line input instead of the hot side. All generation
>>> of the EMP shot requires that you isolate a charged capacitor and
>>> saturated motor windings to create the effect you are looking for.
>>> The little Chinese Ladies created the isolation effect by incorrect
>>> switch placement. by complying to motor specifications, the problem
>>> was corrected, but I learned how to create the EMP easily. Years
>>> later I did the exact same transit switching isolation of charge in
>>> the 5 ton A/C compressor which was a magnum version of the little
>>> ceiling fan shaded pole motor event. The single phase 230VAC, 5HP
>>> motor uses L1 & L2 line with no neutral in the schematic. Motor
>>> frame and chassis is bonded to earth ground. The start capacitor
>>> is 45mfd and run is 5mfd. See schematic:
>>>
>>>
>>> By using an overcurrent relay in the contactor control circuit you
>>> can adjust the contactor trip current at peak locked rotor
>>> saturation current which is 82mamps for this type of motor. when
>>> contactor drops open the entire motor/capacitor wiring is isolated
>>> from a neutral return, with only the motor iron and frame bonded to
>>> earth ground. the cancellation of magnetic flux and capacitor
>>> charge developes a Neutral spike out of the earth bonded side of the
>>> circuit. You did not destroy the energy, you just changed its form
>>> into a Aetheric event. Yes, Hector it is quite a sight to see this
>>> event. Have fun. Norm
>>>
>>> On 4/2/2018 6:57 PM, [email protected] [EVGRAY] wrote:
>>>>
>>>> ASK NORMAN HE KNOWS WHAT A NEUTRAL SPIKE CAN DO .....!!!
>>>>
>>>>
>>>> (h)
>>>>
>>>>
>>>>
>>>> ---In [email protected], <lutzliebers@...> wrote :
>>>>
>>>> Sounds like doomsday-physics!
>>>>
>>>> :-)
>>>>
>>>>
>>>>
>>>> Am 02.04.2018 um 21:18 schrieb arkresearch@...
>>>> <mailto:arkresearch@...> [EVGRAY]:
>>>>
>>>>> If the coil is OU the coilbanger will keep flashing forever
>>>>> or will simply go into self destruct mode by gunning itself to
>>>>> a huge EMP event ...\\
>>>>>
>>>>> (H)
>>>>>
>>>>
>>>
>>
>
>