Body
To: all, Back in the day there was a For What it is Worth category in
which I will share this document with you. In this article, there is
reference to a large shop warehouse facility which BTW was my Research
Lab at Dawson, Texas. I built some of the components for Ken Hawkins,
Aetheric Fire experiments and accompanied him to visit ElPaso, TX to
wittness an aetheric fire demonstration. I had similar results from my
own experiments with the dual auto ignition systems while firing plasma
tubes to create ozone at 100nm wave length light.
FYI Norm
Hawkings’ Generator -1- July 13, 2001
HAWKINGS’ GENERATOR of Cold Electricity
Report by
Henry Curtis and Gary C. Vesperman
Gary C. Vesperman lives in a house on 588 Lake Huron Lane, Boulder City,
Nevada 89005-1018; 702-435-7947; [email protected]. He worked as a
technical writer with 18 computer engineering companies in Silicon
Valley and with EG&G Special Projects in Las Vegas. Since 1992, he has
written small initial public offering memoranda and business plans for
two or three dozen startup companies. During that time he became
involved with a network of inventors and scientific pioneers in new
sources of energy. He has a BS Electrical Engineering degree from
University of Wisconsin-Madison. He has compiled several reports on
numerous advanced technologies (see www.padrak.com/vesperman).
Gary met Henry Curtis at the Institute of New Energy Symposium in Salt
Lake City September 2000. Henry has been involved with the new energy
field for approximately 15 years. Henry has investigated in person
numerous new energy devices. Henry's permanent address is c/o Adv Cmp
Bkkpng, 6111 North Pepper Tree Lane, Tucson, Arizona 85741. Phone is
303-596-6466. Henry’s cell phone is 954-295-5407. He travels most of the
time. His email address is [email protected].
Henry first met Ken Hawkings at the Keelynet conference in Dallas the
weekend of June 16-17, 2001. Norm Wootan had introduced them. Not that
Henry knew Norm all that well, but Henry was talking with Norm about the
Gray electric motor and the prototype car that was built about 10 years
ago and is now for sale for $50,000. When Henry and Ken talked about the
Gray motor car Ken told Henry that he did not know where it was and that
Joe Gordon had the contact information. Ken was in a hurry to go and
gave Henry his cell phone number.
Henry called Ken Wednesday evening, June 20, 2001. Ken was excited about
talking and had a lot to say about a variety of technical subjects. Ken
is a technical person who has been in management of companies for many
years. He appears to be 50 to 60 years old.
He lives in Dallas where he has a home and a large warehouse. He said
that in the last 3 years he had spent a lot of money on free energy
projects. His wife is not happy about his negative cash flow. Ken had
been a corporate executive and has a technical background. He has
retired three times. He is now working towards his fourth retirement.
Ken Hawkings was six months into a lucrative nine-month contract in New
York City with a telecommunications company called or with the
abbreviation ONI. He was working on a project involving resonance
between two crystals. The objective of the contract is to build two
prototype telephones so that people in separate places can talk to each
other while bypassing the existing telecommunications network. An
interview with the CEO of ONI Systems Corporation, if it is the same
company, is shown on http://www.itradionetwork.com/scripts/martin2.html.
ONI Systems Corporation is an all-optical telecommunications company
which is only about 2.5 years old.
Ken spoke of building some mica capacitors and of first mining the mica
in Montana. He also has a substantial interest in 300 submarine
batteries that he had purchased on consignment.
Hawkings’ Generator -2- July 13, 2001
Continuing their discussion on the telephone of the conference – Ken
decided to loan Henry the
only existing video of an experimental circuit and invited Henry to make
some copies and pass
them around. Ken arranged for his wife to Fedex a short video to Henry
of two aetheric fire
experiments with Hawkings’ generator.
This device (the “Hawkings’ generator” until a more generic name is
agreed upon) was not publicly
disclosed during the Keelynet conference. Henry thinks the device is the
most exciting he has ever
seen during his 15 years in the new energy field.
Henry arrived in Las Vegas Friday from Denver to attend an Eckankar
conference where he met
Jeane Manning, an old friend. Jeane Manning was staying in Gary’s house
in Henderson, Nevada.
Sunday afternoon there was a lengthy meeting of Henry, Jeane, Gary, and
Bob Nelson of
rexresearch.com. Henry gave Jeane, Gary and Bob each a copy of the
video. Henry told them some
information about Hawkings’ generator. Gary scheduled Henry to meet with
him and John Grubb
Wednesday morning July 11, 2001.
Early Wednesday morning Henry came to Gary’s house to have breakfast.
The video was played so
that Henry could explain to Gary in detail what he knows about the
generator. The video does not
clearly show some of the wiring and components so the following
description may not be totally
accurate and complete.
In these experiments the apparatus was set up with two lead acid
batteries as the power source for
two automobile ignition coils. Each of these coils are energized through
electronic ignition
distributor pick up coils. The distributor pickup coils were triggered
by a 555 timer chip’s
oscillating pulse. The coils were arranged to alternate their on or off
cycles making a push-pull
arrangement.
The high voltage output of each ignition coil is fed to a 4" fluorescent
light. Each fluorescent tube
has a strong permanent magnet attached to its center – north pole on one
side and south pole on the
other side. The aetheric fire (cold electricity) came from the other end
of the tube. In the video the
two tubes were connected to a small spark gap and produced a 1/4 inch or
so white spark. The 555
timer maxed out at about 3100 hertz in these experiments. In a later
test with a better timer chip a
sweet spot, a point of apparently optimum resonance, was found at
150,000 hertz. At this frequency
a 6 to 8-inch white spark 4 inches in diameter was produced.
In greater detail, two standard 12-volt car batteries are shown in the
video. Each battery powers one
half of the circuit. A 555 timer, essentially an old model
multi-vibrator, turns on and off a switch in
each half of the circuit. The timer’s output is applied to both switches
in such a manner as to force a
pair of two ignition coils to alternately function in a push-pull mode.
Each switch connects and disconnects a magnetic pickup coil (from a car
engine’s distributor) to a
battery on cue from the timer’s signal. Each magnetic pickup powers the
primary side of an ignition
coil. The high voltage from each ignition coil’s secondary side is
applied to one end of a small
fluorescent tube which is about 4 inches long and an inch in diameter.
At this point, the circuit
begins to act weird.
Hawkings’ Generator -3- July 13, 2001
Two magnets are placed next to each tube so that the north pole of one
magnet is opposite of the
south pole of the other magnet, with the body of the tube mounted in
between the two poles. The
magnetic field between the two poles pushes the electrons in the tube
off to one side. Now only cold
electricity is extracted from the zero point energy field by the tube.
The tube is now no longer
capable of generating hot electricity. The other end of the tube is
applied, through a wire, to a brass
(or maybe copper?) rod. A brass ball is on the other end of the rod from
the connection with the
wire from the tube.
Each all-thread rod is horizontally mounted within a hole through a
vertical supporting wooden
block. A similar rod connected to the other tube is also horizontally
mounted through a hole in
another vertical supporting wooden block. The bases of these two
vertical supporting blocks are
attached to a horizontal wooden base. The distance between the two brass
balls is adjusted by
sliding the two rods through their respective holes in the two vertical
wooden blocks. The rods are
several inches above the base board.
The video shows a white spark between the two brass balls at about
three-eighths of an inch apart
with the spark one quarter inch in diameter. The spark shown has the
shape of a football with its
pointed ends cut off about four inches from each point. The frequency
being generated by the
adjustable timer at the time the amateurish video was taken was 3100
hertz, the 555 timer’s
maximum frequency.
The reason the video is amateurish, according to Henry, is that the
device was made operational,
and then it was quickly decided to grab a video camera and make a tape
which lasts less than five
minutes. A more professional video would show a block diagram or
schematic of the circuit on a
board or poster, close-ups of some key components and an explanation of
their function, and then
the entire circuit in operation with a thorough explanation of
functions, possible theories of
operation, and test results.
Henry was told that when the switching frequency produced by a different
timer is at an optimum of
150,000 hertz, the white spark is approximately six inches long and four
inches in diameter.
Apparently very little power is being drawn from the batteries. An
equivalent-sized spark generated
by an arc welder would require thousands of amperes and volts.
The circuit “sings” when in operation and is definitely audible on the
videotape. It is actually a little
loud, which could be a problem in some applications. When Ken first
heard the weird singing noise,
he recognized that the sound from his circuit is the same singing noise
that Nikola Tesla has
reported as singing coils and is apparently a sure sign of interaction
with the zero point energy field.
One very big advantage of this circuit is that it requires only a few
relatively inexpensive
components. In fact, John Grubb asked if it can be so easily made with a
few parts from Radio
Shack, a hardware store, and an auto parts store, how can we make money
with it? At the moment,
there appears to be no plans to obtain any patents.
Hawkings’ Generator -4- July 13, 2001
Early in 2001 Ken, Norm Wootan of Waco, Texas, and Paul Walker (?) went
to Germany to sell a
hydrogen generating system they wanted to develop to a company that
sells hydrogen in Germany.
Paul's background is in physics and submarines. On the flight over to
Germany they got into a
discussion and figured out the aetheric fire generating concept which
was subsequently developed
into the “Hawkings’ generator”. Ken remembers this as an exhilarating
and exciting time – one of
his life's peak experiences.
Gary met Norm at the 1996 Tesla Society convention when Norm and Joel
McClain reported on
their magnetic resonance amplifier.
Experimental insertions of objects in the spark, the big one generated
with 150,000 hertz, so far
have resulted in some peculiar materials and processes. A ceramic has
been made with an
extraordinarily high melting point of around 10,000 degrees. Ken, Norm,
and Paul (?) plan to use
this ceramic for lining the reaction vessel of their new hydrogen process.
At least some types of materials become more dense the longer they are
present inside the spark.
There is concern that a critical mass of nuclear explosive could be
accidentally created.
It is not known to Henry and Gary what the cold electricity can do. For
instance, what happens
when an electric motor or an incandescent light bulb loads the circuit
instead of a spark gap? It is
apparent to Henry and Gary that a whole new universe of applications for
cold electricity may be
opening up, starting with close to ground zero of no knowledge of the
phenomenon.
In Ken's view there are four kinds of electricity:
AC alternating current
DC direct current
Static electricity or static charges
Aetheric fire or cold electricity
The aetheric fire is produced by working the aether at high voltages and
high frequency. The higher
the voltage and the higher the frequency, the more power is produced.
30,000 volts and 150,000 Hz
appears to produce abundant amounts of energy, i.e., in the hundreds of
thousands of watts range.
At this point in time this is an estimate based on very limited
qualitative observation. There is no
real data.
The theory here is that the fluorescent tube acts as a spark gap
capturing the aetheric energy. The
magnets on either side of the fluorescent tubes deflect the electron
flow so that the regular
electricity does not flow through the tube. Thus the only output of the
tubes is aetheric fire or cold
electricity.
The net result of all of this is an over-unity power conversion gain
which appears to be greater than
1000:1.
Hawkings’ Generator -5- July 13, 2001
Edwin V. Gray had a company in the 1970-to-1990 era that built electric
motors and advertised a
soon-to-be-produced electric automobile with unlimited range. Gray was
issued two patents. One
patent is on the motor, and the other patent is on the diffuser tube.
These are discussed at length by
Peter Lindemann in his book and video. In this automobile there was a
diffuser tube that Gray
patented. It is believed that the function of the diffuser tube is the
same as the fluorescent tube in
Ken Hawkings’ device.
It needs to be established that the fluorescent tube is more efficient
in the Hawkings’ circuit than
Gray’s diffuser tube. Another tube that would be interesting to try is
the tube used in the Correas’
pulsed abnormal glow discharge reactor. It would be ideal for longevity,
compact packaging, and
sturdiness reasons to find a device which is not a tube which could be
used in place of the
fluorescent tube.
Henry thinks that running the aetheric fire through a step-down
transformer and then rectifying it
would result in an abundant source of very cheap electricity. Tests need
to be done to determine the
feasibility of this approach.
Ordinary hot electricity involves electrons moving along an electric
field through inductors,
resistors, etc. Cold electricity does not involve electrons moving
around. Then just what is cold
electricity? Gary has no idea. Henry doesn’t know either. There is much
fundamental research
which needs to be done. For instance, can an ammeter measure cold
current? The power of the hot
DC electricity from the batteries can be easily measured. So how can the
power of the circuit’s
output of cold electricity be measured? What is the overall power gain
of the generator? Does cold
electricity comprise a hidden part of the commonly understood current
flow of electrons? And when
the electrons are deflected in the tubes, the cold electricity that may
have always been present is
now allowed to make its presence detectable in some fashion?
The morning of July 11, Henry and Gary had their meeting with John
Grubb. As customary with
John, he is very cautious. They talked about working with the local Las
Vegas electric vehicle
experts to experimentally adapt the Hawkings’ generator to an existing
electric vehicle and see if
the car would run for a long time without recharging from Nevada Power.
Gary thinks the Las
Vegas chapter of the Electric Auto Association is one of the
association’s stronger chapters.
John, Henry, and Gary decided that the next step is for Henry to talk
with Ken Hawkings and ask
him what he wants to do. Henry will emphasize to Ken that there is
capability in Las Vegas for
incorporating the generator as an on-board battery charger for
self-powered electric cars.
In the meantime, John and his wife Marge moved to Calgary where they are
permanent residents.
Their address is 34 Rivercrest Villas, Calgary, AB T2C 4K4. Phone is
403-255-0831; fax is 403-
720-9357. Temporary email address is [email protected]. John
expects to be back in Las
Vegas early August.
Henry is going to try to build his own generator in Tucson. Gary will
work with Ralph Cruz and
Rick Pool, Gary’s friend around the corner from Gary’s house who is an
expert automotive
mechanic, to build his own generator as well. Gary already has had Rick
show him an ignition coil
and Rick’s book on car repair which has a good description of ignition
coils. Ignition coils have an
87.5 turns ratio between the primary and secondary coils and can put out
as much as 20,000 volts.
Hawkings’ Generator -6- July 13, 2001
Henry and Gary observed that AC electricity is not good for people’s
health. DC electricity is much
healthier. AC is used so that the voltage can be easily stepped up for
long-distance transmission.
With a DC generator in each house, a corresponding product line of
DC-powered refrigerators,
computers, TVs, etc. will need to be created. RVs already use 24V DC
power. So RVs may be an
excellent initial market for a 24V DC version of the Hawkings’ generator.
Keep in mind that the Hawkings’ generator still needs to be verified
that it is capable of powering
electric motors, charging batteries, and doing other wonderful things
besides densifying matter
placed inside the white spark.
On 4/3/2018 7:20 AM, Norman Wootan [email protected] [EVGRAY] wrote:
>
> (H), From my very first encounter with EMP back in 1981 while working
> as Director of Research & Development for a ceiling fan manufacturer,
> was doing final acceptance,destructive testing of new production
> samples from China. The motor samples were a tall stack Emerson copy
> that had a reverse feature. (1/6th HP). The reverse feature was
> accomplished by moving the run capacitor from one end of the shading
> windings to the other end via a double pole , double throw Carling
> toggle switch. Hookup wire was 18 ga. zip cord 2 conductor. Motor
> drew 1.75A @120VAC = 210 watts. Testing included severe loading by
> running motor full speed forward, then reversing (toggle switch) which
> caused motor to grind to a stop , then spool back up to speed in
> reverse rotation. After several reversal operations, the toggle switch
> exploded with a bright green flash and the bang of a big fire cracker.
> Tear down of motor and inspection found no damage to the 22 ga. motor
> windings nor to the 18 ga. internal switch circuit wiring. ???? The
> Carling 30 amp rated double pole, double throw switch was totally
> destroyed with contacts vaporized. After vaporizing several switches
> in subsequent test, I called in an Electrical Engineer Professor from
> University of Texas to observe the abnormal operation. We destroyed
> another switch then changed the reverse switching to a large double
> throw motor reversing contactor rated at 60 A. The contactor
> exploded with total destruction of contacts with bang of huge
> firecracker and bright green flash. The Professor could not explain
> the destructive force created from such small wiring and only a 210
> watt line draw from motor. The 20 amp panel breaker did not trip in
> any of these episodes. Here is the explanation as to what caused this
> whole scenario. After studying the schematic of the motor wiring
> plans and comparing with the (as assembled) by little ladies in tennis
> shoes (China), it was found that reversing switch was wired on neutral
> side of line input instead of the hot side. All generation of the EMP
> shot requires that you isolate a charged capacitor and saturated motor
> windings to create the effect you are looking for. The little Chinese
> Ladies created the isolation effect by incorrect switch placement. by
> complying to motor specifications, the problem was corrected, but I
> learned how to create the EMP easily. Years later I did the exact same
> transit switching isolation of charge in the 5 ton A/C compressor
> which was a magnum version of the little ceiling fan shaded pole motor
> event. The single phase 230VAC, 5HP motor uses L1 & L2 line with no
> neutral in the schematic. Motor frame and chassis is bonded to earth
> ground. The start capacitor is 45mfd and run is 5mfd. See schematic:
>
>
> By using an overcurrent relay in the contactor control circuit you can
> adjust the contactor trip current at peak locked rotor saturation
> current which is 82mamps for this type of motor. when contactor drops
> open the entire motor/capacitor wiring is isolated from a neutral
> return, with only the motor iron and frame bonded to earth ground. the
> cancellation of magnetic flux and capacitor charge developes a Neutral
> spike out of the earth bonded side of the circuit. You did not destroy
> the energy, you just changed its form into a Aetheric event. Yes,
> Hector it is quite a sight to see this event. Have fun. Norm
>
> On 4/2/2018 6:57 PM, [email protected] [EVGRAY] wrote:
>>
>> ASK NORMAN HE KNOWS WHAT A NEUTRAL SPIKE CAN DO .....!!!
>>
>>
>> (h)
>>
>>
>>
>> ---In [email protected], <lutzliebers@...> wrote :
>>
>> Sounds like doomsday-physics!
>>
>> :-)
>>
>>
>>
>> Am 02.04.2018 um 21:18 schrieb arkresearch@...
>> <mailto:arkresearch@...> [EVGRAY]:
>>
>>> If the coil is OU the coilbanger will keep flashing forever or
>>> will simply go into self destruct mode by gunning itself to a
>>> huge EMP event ...\\
>>>
>>> (H)
>>>
>>
>
>