Re: Triple thick BiTT

Body

yes its a correct simile!!!

you can keep the dong safe ! 

(H)

 
 

---In [email protected], <konehead@...> wrote :

 Hi hector
 I will bet my dong a magnetic diode is something that blocks magnetic flux to flow through a core material in one direction, but allows it to flow the other direction...for example in the Beardan MEG he sticks a magnet in or on the core-leg, permitting AC flux in this transformer leg to go one way {through the magnet) that the magnet's polarity allows, but not the other way....
 As for diac in magneto amplification, I know what a magneto is, and to amplify the power or voltage in a magneto, you can stick a magnet of the correct polarity onto the back-end of the magneto's core  and this creates a stronger flux in the core, and you get more power or voltages, but the magnet needs to face the right way in polarity for this to work - similar to getting more speed and power from a DC pulsed motor by putting magnets back behind the cores of the motor coils (but again must face correct polarity or motor slows)....AKA "regauging magnets" which is similar but does more than just strengthen the flux in the core.....will not get into regauging now...
 So am I right? Let me know eh!
 As for the BiTT it is not the Beardan MEG (farts and dies under load!) and it is not the other stuff that might employ some sort of 
magnetic diode/external horseshoe cores/magneto transistors (where cores work like transistor switch in how magnetic flux flows and switches on or off ???)...
 Instead the BiTT is very simple and just gives a lower-magnetic resistance PATHWAY to magnetic backemf  and it happily flows over to the opposite side secondary (instead of back to the primary)
 So the secondaries become ADDITIVE to power produced, not "BLOCKING" or "BUCKING" magnetic flux flow that reflects back to primary and gives extra draw to primary when secondaries load.
 IF tryibng to do this with a 3ph transfiormer, it wont work unless you add a horeshoe or similar shape core leg to top and bottom of core, and this added core shapes should be much thicker than the 3ph transformer's existing cores, otherwise the flux will not want to ride the easy road back to the opposite side secondary....maybe this is what you are saying I don't know...
 ciao
 Kojne