Re: [EVGRAY] Triple thick BiTT

Body

Hi Doug, Sven, Ole guys
Here attached is a pair of small coils wound on laminated steel core, sorry
for rough job, just want to show whats possible.
The primary coil is plain enameled copper wire, the secondary coil is
copper wire with a coiled steel florist wire continuous shield.

The Red trace is the input current at 10KHz.
The Yellow trace is output into a 100 Ohm resistor.

On the screen 10 major divisions equals 360 degrees, at 10 microseconds per
division.
We are triggering off the Red trace.

Where the Red trace rises above the centre zero line for the first time is
our zero degrees point.
We can see that the Yellow output current & volts trace doesn't rise above
the zero line until 2.8 divisions later.

So if 10 major divisions equals 360 degrees then 1 major division is 36
degrees yes?